JVC TH-S320B Audio Home Theater System 2.0 CH Soundbar User Manual

TH-S320BAudio Home Theater System2.0 CH SoundbarUSER GUDE

NOTE: For Spanish and French Manual, please visit www.jvcproducts.com/supportNOTA: Para el Manual de Español y Francés, por favor visite www.jvcproducts.com/supportREMARQUE: Pour l’espagnol et Français manuel, s’il vous plaît visitezwww.jvcproducts.com/supportFCC WarningThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.The device has been evaluated to meet general RF exposure requirements.To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body and fully supported by the operating and installation configurations of the transmitter and its antenna(s).IC WarningThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.The device has been evaluated to meet general RF exposure requirement. To maintaincompliance with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. le dispositif de a été évalué à répondre général rf exposition exigence.pour maintenir la conformité avec les directives d’exposition du RSS-102-Radio Fréquence (RF). ce matériel doit être installé et exploité à une distance minimale de 20 cm entre le radiateur et votre corps.IC: 26551-51H320420BSupplier’s Declaration of ConformityModel No. TH-S320BTrade Name: JVCResponsible Party: Russell Distribution CompanyAddress: 7801 Hayvenhurst Avenue, Van Nuys, Ca 91406 USATelephone No. 888-582-8870Contact Information: https://jvcproducts.com

Important Safety Instruction

Thank you for purchasing the TH-S320B Soundbar. Please read this user manual carefully and keep it for future reference.Warning

Caution:To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside.  refer servicing to qualified personnel only. Plug on the power cord is used as the disconnect device, the disconnect device shall be easily accessible.The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.Notice:This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities unless they are under supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not damage the appliance.

  1. To prevent possible hearing damage, do not listen to high volume levels for prolonged time periods or a sudden high volume level.
  2. Do not leave the device unattended. Switch off the device whenever it is not in use.
  3. The appliance is not intended to be operated by means of an external remote control system, other than the branded remote, or as advised in the user manual.
  4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
  5. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
  6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, tablecloths, curtains, etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
  7. The apparatus must not be exposed to dripping or splashing liquids and that objects filled with liquids, such as vases, must not be placed on the apparatus.
  8. To prevent fire or shock hazards, do not expose this equipment to direct heat, rain, moisture, or dust.
  9. Do not place this unit near any water sources e.g. taps, bathtubs, washing machines, or swimming pools. Ensure that you place the unit on a dry, stable surface.
  10. Do not place this unit close to a strong magnetic field. This may damage the system.
  11. Do not place the unit on an amplifier or receiver.
  12. Do not place this unit in a damp area as the moisture will affect the life of electric components.
  13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
  14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
  15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, there may be a disturbance on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such disturbance, keep this unit some distance away from the TV set.
  16. The mains plug is used to disconnect the device, the disconnected device should remain readily operable.

Important Safety Instructions

  1. Read these instructions carefully and follow them accordingly.
  2. Do not place this apparatus under running water. It may adversely affect the electronic components inside
  3. Clean only with a dry cloth.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Do not damage the power cord by walking over it or pinching it, particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
  7. Only use attachments/accessories specified by the manufacturer.
  8. Unplug this apparatus during lightning storms or when unused for long periods of time.
  9. Ensure the servicing is done by qualified service personal. Servicing is required when the apparatus has been damaged in any way, for example, when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture. Does not operate normally, or has been dropped and is not functioning properly.
  10. The AC plug is used to disconnect the device; the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.

Preparation for Use

Unpacking and Set-Up

  • Remove the Soundbar from the carton and remove all packing material from the Soundbar. Save the packing material, if possible, in case the Soundbar needs to be serviced or transported. The original carton and packing material is the only safe way to pack your Soundbar to protect it from damage in transit.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

BluetoothThe Bluetooth’ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by AJS Electronics Limited is under license Other trademarks and trade names are those of their respective owners.This product is manufactured, distributed, serviced, and warranted exclusively by E & S International Enterprises, Inc. “JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.”

•Place your Soundbar on a level surface such as a table, desk, or shelf, conveniently nearby an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.•Unwind the Line cord connecting the AC adapter and extend it to its full length.Protect Your FurnitureThis model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil-based furniture polishes,wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centerseverywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the unit.Power SourceThis soundbar is designed to operate on a normal AC Power source. For India, it works on a normal operating voltage of 110V-240V~50hz/60Hz. Do not attempt to operate the Soundbar on any other power source. You could cause damage to the Soundbar that is not covered by your warranty.

important Notes

  • This soundbar was specially developed for LED/LCD/Plasma TVs: It should not be used in combination with CRTTV’s (Cathode Ray Tube TVs) in order to avoid image interference.
  • The safety and operating instruction manual should be retained for future reference.
  • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.
  • Do not install the product in the following areas:
  • Places exposed to direct sunlight or close to radiators.
  • On top of other stereo equipment that radiates too much heat -Blocking ventilation or in a dusty area.
  • Areas where there is constant vibration.
  • Humidor moist places.
  • Do not place near candles or other flames.
  • Operate the product only as instructed in this manual.
  • Before turning on the power for the first time, make sure the soundbar is plugged to a power outlet.
  • For safety reasons do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
  • Do not attempt to remove any screws, or open the casing of the unit; there are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

Product Diagram

1. DISPLAY2. HDMI(ARC)3. OPTICAL4. AUX5. DC IN 6. VOL-7. POWER/STANDBY8. VOL+9. INPUT10. USB

REMOTE CONTROL

  1. Power button: Press to switch the soundbar on/ off or standby mode.
  2. Pair button: Press the pair button more than 2 seconds to coned and disconnect last device.
  3. VOL+: to Increase the volume.
  4. Previous button: Skip to the previous track in USB & BT mode.
  5. VOL-: to decrease the volume.
  6. Music button: to select and activate the music EQ effect and mode.
  7. Treble-up button: to increase the treble volume.
  8. Treble-down button: to decrease the treble volume.
  9. Mute button: To temporarily turn off the sound. Press the button again to turn the sound back on.
  10. Source input button: to select an Input source for playback: lid: sound from connected HDMI ARC device bt: sound from connected Bluetooth drive. AU: sound from connected Auxiliary Line-in OP: Sound from connected Digital Optical device. US: sound from connected USB driver
  11. Next button: Skip to the next track in USB & BT mode.
  12. Play/Pause button: Start, pause or resume play In USB & BT mode. Reset button: Press and hold the button for more than 2 seconds to restore factory default settings.
  13. Movie button: to select and activate the movie EQ effect and mode.
  14. News button: to select and activate the news voice EQ effect and mode .
  15. Bass+ button: To Increase the bass.
  16. Bass- button: To decrease the bass.
  17. 3D button: to select and activate the 3D EQ effect and mode.

REMOTE CONTROL BATTERY REPLACEMENT

Please insert the batteries as indicated below

A: Remove the battery coverB: Insert 2*AAA batteries according to the markings inside the battery slotC: Close the battery cover

CAUTIONRisk of explosion if the battery is replaced by an incorrect type Handling the battery

  • Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
  • Only use the battery type indicated in this manual.
  • Do not install new batteries with used ones and do not mix different types of batteries.
  • Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.

Handling the Remote Control

  • Do not drop the remote control.
  • Do not allow anything to impact the remote control.
  • Do not spill water or any liquid on the remote control.
  • Do not place the remote control on a wet object.
  • Do not place the remote control under direct sunlight or near sources of excessive heat.
  • Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury. And /or property damage, and /or fire.
  • When the battery is exhausted, the remote control will not be functional.

Operating range of the remote control

  • When the unit is mounted on a wall, point the remote control at the remote control sensor on the bellowed panel.The provided Remote Control allows the unit to be operated from a distance.
  • Even if the Remote Control is operated within the effective range of 26.2 feet (8m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
  • If the Remote Control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Positioning the Sound Bar

Table Placement

  • Place the soundbar horizontally on a solid surface such as a TV  unit or shelves and align it centrally with the TV screen.
  • For best sound output and good airflow around the soundbar, place your soundbar and subwoofer as shown on the right.

Follow the below steps to mount the soundbar on the wall

Note: Brackets, EVA foam, and screws included in the boxStep 1: Paste 2 pieces of EVA foam (with holes) on the two wall brackets aligning at the hole position of wall brackets.Step 2: Remove 4 screws from the rear housing of the soundbar, then insert the 4 screws over the wall bracket screw holes aligning (on the side of EVA foam pasted), and then fasten the screws again.Step 3: According to the two hanging wall positions on the rear of the soundbar, calibrate and mark the two hanging brackets’ hole position on the wall. Then drill two holes on the wall, firstly insert two expansion plastic screws on the wall, then fasten the hanging screws into expansion screw holes.Step 4: Then Paste the 2 pieces of EVA foam (without holes) on the two wall brackets downward. Then place the hollow cross in the center of the bracket against the screws on the wall and hang the soundbar on the wall finally.Please note

  • Wipe off any dirt such as oil on the adhesive surface of the soundbar before adhering.
  • Make sure that the adhesive is securely attached.
  • When peeling off the release paper of the double-sided tape, be careful not to get dirt such as finger oil on the adhesive surface.
  • Be careful of deterioration of double-sided tape due to storage conditions.

Mount the unit on a wall

CAUTION

  • When mounting the soundbar on a wall, all installations had to be performed in the right way. The customer must never attempt to install it without authorization. Improper or inadequate installation may cause the soundbar to fall so as to result in personal injury.
  • To prevent the soundbar from falling, attach it to a wall constructed of drywall (plasterboard)
  • Make sure that commercially available screws are used so that can support the weight of the installation.
  • Fix the cables in a place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the soundbar may fall.
  • Do not lean on the soundbar or apply excessive force to the top of the soundbar, which may cause it to fall.

OPERATE INSTRUCTIONS

Setting the Soundbar

  1. Plugin the power cord of the Subwoofer and soundbar, and the display will light up (Standby mode)
  2. Switch on the soundbar by using the STANDBY button on the soundbar or by using the POWER button on the remote.After switching on, the default input mode will appear on the display
  3. input mode can be changed by pressing the STANDBY button again or by using the INPUT button on remote
  4. Below are input mode names appearing in the soundbar display:BE-Bluetooth Pairing mode,RU -AUX mode, -Optical mode,OP -HDMI TV(ARC) model,US -USB mode,

Volume value: the volume value is 00-32, and the factory set value is “10”. It has last volume memory function. Mode switching: BT/OP/HD/AU/US connection mode can be switched; meanwhile the selected mode will be displayed on the display screen.Auto Standby

  1. The unit will automatically switch to standby mode when no audio input is received for 20 minutes.The soundbar will wake up from standby mode when any button is pressed or source input is received.
  2. If the TV or the external unit is disconnected, switch it off• To switch the unit off completely, remove the adapter from the mains socket.• Please turn the unit off completely to save energy when not in use..
  3. The screen will be turned off for around 10 seconds without any operation when pressing the buttons on the soundbar or on the remote control or the using phone’s volume increase or decrease, the display will be wakened up again.Powering On/Off
  4. Put adapter plug of the soundbar into a wall outlet, it will automatically enter standby mode.
  5. Short-press the STANDBY button to turn on the soundbar.
  6. To turn off, press the STANDBY button on the remote control or unplug the adapter from the wall outlet.

Playing Audio via BT Connection

  1. Turn on the soundbar and then short-press the STANDBY button on the soundbar or the POWER button on the remote control and switch the soundbar to Bluetooth mode and LED display “ ” on the soundbar will flicker in the Bluetooth pairing mode with a double deep sound.
  2. Turn on Bluetooth of your device, search for ” TH-S320B ” on your Bluetooth list, and then select Bluetooth connection.
  3. When successfully paired, you will hear a tone and the ” ”on the screen stops flickering. Then the music on your phone or another compatible device that you selected can be played on the soundbar.
  4. Use the volume buttons on the soundbar or on the remote controller to adjust the volume.
  5. The remote controller includes Bluetooth mode playback controls. Press and hold the PAIR button on the remote controller for more than two seconds to disconnect paired Bluetooth device or connect back last disconnected Bluetooth device.
  6. If you wish, you can change the audio settings by using the relevant buttons on the remote controller.

Notes:

  1. In Bluetooth mode, the remote can control music play/pause or select the previous or next track. PREV/NEXT/PLAY & PAUSE buttons only work in Bluetooth and USB mode; they have no function in other modes.
  2. The above pairing procedure doesn’t need to be repeated with the same connected device once paired.
  3. If the connected device is switched off or manually disconnected, the soundbar will automatically enter pairing mode.
  4. If the connected device is moved away from the wireless range (up to 10 meters) of the soundbar, then it will get disconnected, and it will successfully connect to the device once you re-enter the Bluetooth range.To connect to other devices, repeat the above pairing steps.
  5. If a Bluetooth device has been connected before, the soundbar will connect to the last connected device.Unpair this connection to connect a new device.
  6. There is no automatic shutdown in pairing mode. The soundbar will remain in pairing mode even if no device is paired, so switch it off if not in use.

Playing Audio via USB Port– The soundbar automatically switches to USB input mode with the LED display “ ” when a USB flash drive is inserted.-When a USB flash drive is inserted and the soundbar is power on, then short-press the INPUT key on the remote controller or STANDBY button on the soundbar to switch to USB input mode (in case it doesn’t change automatically) with LED display lighting up “ ”. And music on the USB will be automatically played.-This mode cannot be used on the soundbar until a USB flash drive is connected.

  1. Ensure that your USB flash drive contains an MP3 audio file (other file types are not supported.)
  2. Connect the USB flash drive to the USB port on the soundbar or by USB adapter (or your own USB extension cable connected to the USB port) and the music will be played automatically.
  3. The remote control includes USB input mode playback controls.

Audio input(Aux)Connection

  • Use a 3.5mm to 3.5mm audio cable (not included) to connect the PC, tablet, smartphone, TV headphone socket to the AUX socket on the soundbar.
  • Use an RCA to 3.5mm audio cable (included) to connect the Blue Ray DVD Player / TV’s audio output sockets to the AUX socket on the soundbar.
  • Then short-press the power button on the soundbar or on the remote controller to switch to audio input mode with LED display lighting up.
  • In this mode, playback can only be controlled on your connected deviceNote: For some computers, you may need to access the audio control panel to manually set the soundbar as above picture.

Optical Mode-Remove the cap of the optical cable (keep the cap for future use); check the direction of the plug. Connect the soundbar and TV with the optical cable.-Use this mode to play music from a TV with optical digital output on the soundbar. In TV sound settings, select the soundbar optical connection (output for audio). When the optical cable is connected, the TV audio output is set to PCM format.-The TV must have an optical digital output. Use the supplied optical cable to make the connection as follows:

  1. Connect the optical cable to the optical digital output of your TV.
  2. Connect the optical cable to the optical digital input of your soundbar.
  3. Switch on the TV set and the soundbar. Set the connected TV to “PCM Stereo”. Set the audio output mode as <automatic> or <decoded output as PCM state>.
  4. Start playing on the TV.
  5. Press the “INPUT” button on the remote control or the “STANDBY” button on the soundbar to select OP– OPTICAL mode.
  6. Use the volume buttons to adjust the volume to your requirements.
  7. You can also change the audio settings by using the relevant buttons on the remote control.

Note:

  1. When connecting a device such as a TV/Set-top box/ DVD/ game console with an optical cable, set the audio output mode of the device to PCM mode (digital optical output).
  2. Do not bend the optical cable, otherwise, the cable inside will be damaged.

HDMI(ARC) Mode

  1. The soundbar supports HDMI(ARC) with an audio return channel (ARC). You can hear the TV audio through your soundbar by using a single HDMI(ARC) cable. But on condition that your TV is ARC compliant.
  2. Using a high-speed HDMI(ARC) cable, connect the HDMI(ARC) connector on the soundbar to the HDMI(ARC) connector on the TV. The HDMI(ARC) connector on the TV might be labeled differently. For details, see the user manual of your TV.
  3. When HDMI(ARC) is connected, the TV sound setting in “sound output” mode should be set as <external PCM Stereo>, in addition, digital audio output mode should be set as <automatic> or <decoded output as PCM state>. When the HDMI(ARC) cable is connected, the TV digital audio output is set as PCM format. Then start playing music on the TV.
  4. Press the “INPUT” button on the remote control or the “STANDBY” button on soundbar to select HD– HDMI(ARC) mode.Different TV might be a different setting, please refer to your TV User Manual.
  5. Use the volume buttons to adjust the volume to your requirements.
  6. You can also change the audio settings by using the relevant buttons on the remote control.

Note:

  1. When connecting a device such as a TV/Set-top box/DVD/ game console with HDMI(ARC) cable, set the audio output mode of the device to PCM mode <digital HDMI (ARC) output>.
  2. The TV is connected to an HDMI(ARC) port with a soundbar. Different TVs might have different setup menus, but the operation approach is the same.
  3. If need to connect the set-up box meanwhile, please firstly connect the HDMI(ARC) connector and paired to the soundbar. Then connect the set-top box.

TROUBLESHOOTING

PROBLE/TROUBLE POSSIBLE CAUSE SOLUTION
There Es no sound output from the soundbar. Another input source is selected Select an appropriate input source.
The mute function is activated.
Cancel the mute function.
The volume of the sand bar or TV/other device is adjusted too low. Increase the volume level on the soundbar or by remote coned or on TV.
The power cable ce the unit is not connected properly. Make sure that the power cable of the unit is connected to an AC wall outlet securely.
Input Jacks on a playback device are connected Conned the input jack on the soundbar ard the output jack on the playback device.
Signals that the soundbar cannot playback when being input. When soundbar end TV or over devices are corrected by an audio cable through TV (ARC)
port output. Select the coned audio input and output. Make sure the digital audio output setting on the playback device to PCM format. Since the output format of cur soundbar is PCM. if it is used. the decoding format of TV or other devices will be adjusted to the PCM state.
The sound is distorted or echoed, TV volume is not muted. If you play auto from TV through the soundbar. make sure that the TV is muted.
The volume decreases when the unit is turned on Die automatic volume Must: rent function is activated. To prevent excessive loudness. the unit automatically controls its volume within a certain level in the unit is turned on. Turn up the volume as required.
The nose is heard. The sound bar s too close to another digital or high-frequency device. Move those devices away from the soundbar.
The unit can be operated by using the remote control. The unit is out of the operating range. Use the remote control within the operating range.
The batteries are weak Replace with new batteries.
The remote lowed sensor of the soundbarIs exposed to direct sunlight or strong lighting. Adjust the lighting angle a reposition the soundbar. Make sure our product carrot be used In sunlight.
The TV can be operated by using the TV’s remote control. The unit is blocking the TV’s remote carol sensor. Position the unit so that it does not obstruct the TV’s remote control sores.
A device MIMI connects the sound Dar or the unit cannot be connected to a Bluetooth device. The bluetooth function of the device is not activated. not paired Of connected correctly. Restart the sound Dar and try pawing agan. You have not enabled the Bluetooth function of the device. see the user manual of the device on how to enable the function and correctly connected the device. The soundbar is already connected with another ‘Neenah device. Disconnect the connected device. and then try again.
Bluetooth is not selected as the input source. Select Bluetooth as the input source.
The unit is connected to a different Bluetooth device Ungar the Bluetooth device Owe is tunny connected and par with the desired Bluetooth device.
The unit Is too far away from the Bbeloodi device. Move the Bluetooth device closer to the unit.
A device emitting electromagnetic waves (such as a microwave oven. a wireless de and so on) may be placed nearby Do not use this unit near devices that emit electromagnetic waves.
The Bluetooth device that you are using may not support the protocol. Use a Bluetooth device that supports the protocol.
The connection profile registered in the Bluetooth device may not be functioning correctly for some reason. Delete the connection porno in the Bluetooth device and then connect the Bluetooth device to this unit.
PROBLE/TROUBLE POSSIBLE CAUSE SOLUTION
The sound quality of audio play from a connected Bluetooth device is poor and the connection is not stable. The Bluetooth reception is poor. Move the device closer to the soundbar.or remove any obstacle between the device and the soundbar.
No sound can be heard or sound breaks (Bluetooth mode) The volume on the Bluetooth device may be too low. Raise the volume on the Bluetooth device.
Bluetooth is not selected as the input source. Select Bluetooth as the input source.
Playback on the device has not been performed. Perform playback on the device.
The sound output on the Bluetooth device may not be set to this unit. Select this unit as the output device on the Bluetooth device.
The connection to the Bluetooth device was cut off. Connect with the Bluetooth device one more time.
The unit may be too far away from the Bluetooth device. Move the Bluetooth device near this unit.
A device emitting electromagnetic waves (such as a microwave oven. a wireless device and so on) may be placed nearby. Do not use this unit near devices that emits electromagnetic waves.
There is no sound from soundbar –HDMI TV (ARC) Mode No qualified HDMI TV (ARC) cable is used &No signal is input on the soundbar & connection and the operation method is not correct. 1. Make sure that the user connected the TV and soundbar with a 19-core HD ARC cable.2. The soundbar and TV are connected through TV (ARC) port output: make sure that the TV is ARC compliant.3. Set the TV to I-IDMI ARC (CEC).Set the audio output mode of the TV to PCM format. (Or refer to your TV user manual)
There is no sound from soundbar(OPTICAL Mode) OPTICAL cable may be damaged & No signal is input on soundbar & the connection and operation method is not correct. 1. Try to replace another OPTICAL cable to connect.2. Set your TV audio output to PCM format. (Pls refer to your TV user manual)
There is no sound fromsoundbar (USB mode) The USB file type is not supported & Soundbar doesn’t switch to USB input mode automatically when USB is inserted. Make sure that the USB flash drive contains MP3 files because other file types are not supported.Switch the input mode once again, thenplayback again.

Package Contents

Specifications

Model TH-S320B
Technology BT/USB/AUX/HDMI(ARC)/OPT
Drivers 2.5″*2
Audio Output Power 150W Peak Power
Frequency Response 70Hz-20KHz
Signal-to-Noise Ratio 66dB
Impedance 80*2
Power Input DC 24V= 1.75A
Bluetooth Operating Range Version: 5.0 Range:up to 10m
Dimensions 74H*87D*750L mm

JVC Limited Warranty

This JVC branded “Product”, marketed as new, in the original carton to the original purchaser (“Product”), is warranted by Russell Distribution Company, LLC against manufacturing defects in materials and workmanship for a limited warranty period of One (1) Year for Labor and One (1) year for Parts. This Limited Warranty is conditioned upon proper use of Product by you, the Purchaser.This Limited Warranty does not apply to store display products and products sold as a “marked down” special, in “as is” condition, ‘closeouts”, “liquidation and clearance sales”, “open box”, products missing accessories, or no-fault found.Proof of purchase in the form of a Bill of Sale, Receipt or Receipted Invoice is evidence the Product is within the limited warranty period. The Bill of Sale. Receipt or Receipted Invoice must be presented as a precondition to obtaining the limited warranty service.This limited warranty begins on the original date of purchase and is valid only on Products purchased through authorized dealers and used in the United States. Canada, and Puerto Rico. by the Original Purchaser. To receive warranty service, the Purchaser must first contact us for problem determination and service procedures. The original dated bill of sale, receipt, or receipted invoice must be presented upon request as proof of purchase.We will repair your product or if repairs cannot be made, we will replace it at no charge with the same or similar product. If the Product is defective as specified in this limited warranty during the limited warranty period, we may use new or remanufactured parts to repair the Product. All replaced parts and products become our property and must be returned to us. Replacement parts and products assume the remaining original limited warranty, or ninety (90) days, whichever is longer.Product freight must be prepaid by you, the original Purchaser, and shipped in either its original packaging or packaging affording an equal degree of protection. We will not be responsible for or obligated to replace damaged Products.If the Product is received damaged, it is your responsibility as the consumer to file a claim against the carrier. We will only store the damaged Product for 30 days and reserve the right, in our sole discretion, to dispose of the damaged Product or ship it back to you at your expense after 30 days.This limited warranty covers manufacturing defects in materials and workmanship encountered in normal and except to the extent otherwise expressly provided for in this statement, noncommercial use of this Product and shall not apply to the following, including, but not limited to: Damage which occur in shipment; delivery and in retaliation; applications and use for which the Product was not intended; altered Product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems. utilities, services, hardware, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by us or the manufacturer, which damage this Product or result in service problems; incorrect electrical line voltage, fluctuations, and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; burned-in images. Uninterrupted or error-free operation of the Product is not warranted.THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON US. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS YOUR EXCLUSIVE REMEDY AS THE CONSUMER. WE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT; EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED FOR THE DURATION OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE, AND STATES YOUR EXCLUSIVE REMEDY.Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Any provision contained herein which is found contrary to state or local laws shall be deemed null and void and the remaining provisions shall continue in full force and effect.This product is manufactured, distributed, serviced, and warranted exclusively by E & S International Enterprises, Inc.“JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.To obtain warranty service, please call 1 (888) 582-8870 or send an email to [email protected]

Claims and Dispute ResolutionRUSSELL DISTRIBUTION COMPANY, LLC AND YOU AGREE THAT ALL CLAIMS OR DISPUTES ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION, OR PERFORMANCE OF THE PRODUCT, WHETHER BASED IN CONTRACT, TORT, STATUTORY, FRAUD, MISREPRESENTATION OR ANY OTHER LEGAL THEORY, AND ALL CLAIMS THAT ARE SUBJECT OFA  PURPORTED CLASS ACTION LITIGATION THAT YOU ARE NOT A MEMBER OF THE CERTIFIED CLASS, SHALL BE RESOLVED THROUGH ARBITRATION AS PROVIDED FOR HEREIN, OR IN SMALL CLAIMS COURT, AND NOT BY A TRIAL BY JURY. YOU WAIVE THE RIGHT TO A TRIAL BY JURY, AND WAIVE THE RIGHT TO PARTICIPATE IN CLASS ACTIONS ARISING FROM OR RELATING TO ANY AND ALL CLAIMS AND DISPUTES WITH Russell Distribution. YOU AGREE THAT YOU MAY ARBITRATE CLAIMS AGAINST Russell Distribution ONLY IN YOUR INDIVIDUAL CAPACITY AND NOT AS A PLAINTIFF, A CLASS REPRESENTATIVE, OR CLASS MEMBER IN ANY CLASS OR REPRESENTATIVE PROCEEDING. THIS AGREEMENT EVIDENCES A TRANSACTION IN INTERSTATE COMMERCE, AND THUS THE FEDERAL ARBITRATION ACT GOVERNS THE INTERPRETATION AND ENFORCEMENT OF THIS PROVISION. THIS PARAGRAPH SHALL SURVIVE THE TERMINATION OF THIS LIMITED WARRANTY.RUSSELL DISTRIBUTION REQUIRES THAT YOU ARBITRATE YOUR CLAIMS AGAINST RUSSELL DISTRIBUTION PURSUANT TO THE ARBITRATION DESCRIBED BELOW PRIOR TO THE EXERCISE OF YOUR RIGHTS PURSUANT TO TITLE I OF THE MAGNUSON-MOSS WARRANTY ACT. TITLE I OF THE MAGNUSON-MOSS WARRANTY ACT DOES NOT REQUIRE YOU TO PURSUE RIGHTS AND REMEDIES AVAILABLE TO YOU THAT ARE NOT PROVIDED BY TITLE I OF THE MAGNUSON- MOSS WARRANTY ACT.Any such arbitration shall not be combined or consolidated with a claim or dispute involving any other person’s or entity’s product or claim or dispute, and specifically, without limitation of the foregoing, shall not under any circumstances proceed as part of a class action or class arbitration. If you intend to seek arbitration you must first email Russell Distribution at [email protected] a notice of dispute, at least thirty (30) days in advance of initiating the arbitration. The notice must include: (i) a description of your claim and the basis of the dispute; and (ii) a description of the relief you are seeking. If Russell Distribution and you do not reach an agreement to resolve the claim within thirty (30) days after Russell Distribution receives your notice, you or Russell Distributionmay commence an arbitration proceeding.The arbitration will take place in Los Angeles, California, or a mutually agreed upon location. The arbitration shall be administered by JAMS, or alternatively a mutually agreed-upon arbitrator or arbitration service, under the applicable commercial arbitration rules for JAMS or the mutually agreed upon arbitration service, excluding any rules or procedures governing or permitting class actions. The arbitrator, and not any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising out of or relating to the interpretation, applicability, enforceability or formation of this Limited Warranty, including, but not limited to any claim that all or any part of this Limited Warranty is void or voidable, or whether a claim is subject to arbitration. The arbitrator shall be empowered to grant whatever relief would be available in a court under law or in equity. The arbitrator’s award shall be written. and binding on the parties and may be entered as a judgment in any court of competent jurisdiction. To the extent the filing fee for the arbitration exceeds the cost of filing a lawsuit; Russell Distribution will pay the additional cost. The arbitration rules also permit you to recover attorney’s fees in certain cases. Theparties understand that absent this mandatory provision, they would have the right to sue in court and have a jury trial. They further understand that, in some instances. the costs of arbitration could exceed the costs of litigation and the right to discovery may be more limited in arbitration than in court.This arbitration provision also applies to claims and disputes by you, the purchaser of the Product. and all those in privity with you, including your family members, beneficiaries and assigns against Russell Distribution subsidiaries and affiliates and any person or entity that licensed, supplied, sold, or distributed the Product and each of their officers, employee, representatives, licensors/licensees, Agents, beneficiaries, predecessors in interest, successors, and/or assigns. You may opt-out of this dispute resolution procedure by providing notice to Russell Distribution no later than thirty (30) calendar days after the date of the first consumer purchaser’s purchase of the Product. To opt-out, you must send notice by e-mail to [email protected]. The opt-out notice must include (a) your name, email address. mailing address and phone number; (b) the date on which the product was purchased; (c) the product model name or model number; and (d) the Serial Number. Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any way, and you will continue to enjoy the benefits of the Limited Warranty. If you opt-out of these arbitration provisions, Russell Distribution also will not be bound by them.

Audio Home Theater System2.0 CH SoundbarTH-S320BOur Guarantee!Our experienced support staff is here to help!Use our Customer Service to assist you in setting up your new product.Visit: jvcproducts.com or Call: 1-888-582-8870

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by