Full Motion TV Mount LDX640 User Manual

Table of Contents

FULL MOTION TV MOUNTSUPPORT ARTICULANT POUR TÉLÉVISEURMONTAJE ARTICULADO PARA TELEVISOR

Thank you for choosing KantoRead these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts.Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTIONThe maximum loading weight is 100 lb (45 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The wall you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the television and the mount combined. Do not use this product for any purpose other than to mount a VESA compliant TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or serious injury. This product should not be mounted on steel stud walls or cinder block walls. Consult a qualified installation contractor if you are unsure about the type of wall you may have.

Supplied Parts and HardwareProject Overview

Select TV Screws and Spacers
Select Spacers for Irregular TVs
Remove H-Frame from Wall Plate Assembly
Attach TV Brackets
Mount Wall Plate Assembly
Hang and Secure TV
Level TV
Finalize Adjustments
Manage Cables

If you have any problems or difficulties while following these instructions, please contact Kanto directly:Email: Toll Free: US & Canada: 1-888-848-2643 | UK: +44 8000869991. Select TV Screws and Spacers

1.1 A–H Select Screws

The back of your TV has 4 screw holes in a square or rectangular pattern. This is where the mount will attach to your TV. Kanto provides several sizes and lengths of screws. This guide will help you select the right screws for your TV. You will only use 4 of the provided screws to attach your TV – the rest are not needed.

1.2 I–K Select Spacers

Plastic spacers are also provided in 3 thicknesses to allow the mount to work with curved TVs, and TVs that have recessed mount holes, protrusions, or inputs in the way. They can also be used to prevent the TV screws from going too deep and damaging your TV. You may not need spacers for your TV.

2. Select Spacers for Irregular TVs

3. Remove H-Frame from Wall Plate Assembly4. Attach TV BracketsWARNING Do not lay the TV face down on its front. Use a wall or TV stand.

5a. Mount Wall Plate Assembly (Wood Stud Wall) Montez

CAUTIONMake sure the supporting surface will support the load limits outlined in the caution on page two. Tighten lag bolts (P) until the wall plate is snug against the wall.Do not over tighten the lag bolts (P). Each lag bolt must be located in the middle of a wood stud.

5b. Mount Wall Plate Assembly (Concrete Wall)

CAUTIONMake sure the concrete or brick wall is at least 4” thick. Make sure the anchor is seated completely flush with the concrete surface even if there is anotherlayer of material, such as drywall. If drywall is over 5/8” thick, custom lag bolts must be used. Concrete must be a minimum of 2000 psi in density.

6. Hang and Secure TV7. Level TV8. Finalize Adjustments

9. Manage Cables

Check out our full line of bookshelf and desktop speaker systems
Available in a stunning array of colors

colores To learn more about all our audio products, visit www.kantoaudio.com

Limited Warranty to Original PurchaserKanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material and workmanship for the limited warranty period of 5 years.If equipment fails because of such defects and Kanto is notified within 5 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser.Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fitness for any particular purpose, all of which are expressly disclaimed.