Kent Touchless Sanitiser Dispenser Instruction Manual
KENT Touchless Sanitiser Dispenser
KENT proudly presents KENT Touchless Sanitiser Dispenser, which will go a long way towards keeping you and your family in good hygiene and health. We are confident that you will be satisfied with its performance and that it will serve your need for better hygiene and cleanliness.
Features
- Translucent container for sanitiser
- High storage capacity of 1000 ml
- Single and double spray option
- Removable sanitiser container for cleaning and easy refilling
- Fully automatic and touchless use for hands-free operation
- Works with both batteries & adapter
- Wall-mountable
Know Your Product
Items in the Box
- KENT Touchless Sanitiser Dispenser : 1 N
- Screw Bag with Key : 1 N
- Warranty Card : 1 N
Installation Instructions
Installation Procedure
Indicator Lights
There are 2 operation modes-single spray mode & double spray mode.These modes can be activated by pressing respective buttons.
- Green light: single spray
- Red light: double spray
Note: Sensing Distance: 8-12cm
Cleaning & Maintenance
- After starting to use the machine, if it is left unused for many days, the evaporation of water in the pipeline will cause the sanitiser to coagulate, which will have a certain impact on the pump. It is advised to store the sanitiser bottle seperately from the machine
- If the machine has not been maintained for more than 3 months, then the pump may not function properly in such case remove the bottle, open the cap, and pour warm water around 40°C into the bottle. (warm water at about 40°C has a better chance of dissolving the sticky stuff in pipes). Put the liquid bottle back on the machine and start using it as usual until water comes out of the outlet. Repeat 10-15 times for better results
Important Safety Instructions
- Do not place the product on places that are subject to vibration or shock, such as on a wobbling table or an unstable tilted place
- Do not bump, apply excessive force, or scratch. It may cause damage
- Do not wipe the main unit with thinner or benzene. It may cause deformation or discoloration
- Do not install the product in a place close to fluorescent lamps expose it to strong light. It may cause malfunctioning
- Make sure that the sensor unit is not exposed to liquid. The sensor may stop responding. In case you choose not to use the unit for an extended period of time, empty the container of sanitiser
- In case of no use, clean the dispenser and remove the batteries. Store it in a dry place
- Sanitiser works best with this sanitiser dispenser
Battery Safety
- Do not mix the old batteries with the new ones
- Do not use rechargeable batteries as it may affect the proper functioning of the unit
- Please remove the batteries if the unit is not being used for a long time
- Batteries are small objects and must be replaced by an adult
- Use appropriate batteries, 4 Nos. C 1.5V Batteries
Technical Specifications
References
[xyz-ips snippet=”download-snippet”]