KitchenAid KSMPRA Pasta Roller and Cutter Attachment Owner’s Manual

KSMPRA, KSMPCA, KSMPSA

PARTS AND FEATURESPARTS AND ACCESSORIES

MODEL/ROLLER CHARTUse this chart to quickly identify which rollers and/or cutters are included with your KitchenAid product.

MODEL # ATTACHMENT(S) INCLUDED
KSMPRA Pasta roller, Spaghetti Cutter, Fettuccine cutter
KSMPSA Pasta roller
KSMPCA Capellini cutter, Lasagnette cutter

PASTA ROLLER AND CUTTERS SAFETY

Your safety and the safety of others are very important.We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or hurt you and others.All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGERYou can be killed or seriously injured if you don’t immediately follow instructions. WARNINGYou can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.State of California Proposition 65 Warnings:WARNING: This product contains one or more chemicals known to the State of California to cause cancer.WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions.
  2. To protect against risk of electrical shock, do not put Stand Mixer in water or other liquid.
  3. Close supervision is necessary when this or any appliance is used near children.
  4. Unplug Stand Mixer from outlet when not in use, before putting on or taking off parts, and before cleaning.
  5. Avoid contacting moving parts. Keep fingers out of discharge opening.
  6. Do not operate the Stand Mixer with a damaged cord or plug or after the Stand Mixer malfunctions, or is dropped or damaged in any manner. Return the Stand Mixer to the nearest Authorized Service Center for examination, repair or electrical or mechanical adjustment.
  7.  The use of attachments not recommended or sold by KitchenAid may cause fire, electric shock or injury.
  8.  Do not use the Stand Mixer outdoors.PASTA ROLLER AND CUTTERS SAFETY
  9. Do not let the Stand Mixer cord hang over the edge of the table or counter.
  10. Do not let the Stand Mixer cord contact hot surfaces, including the stove.
  11. This product is designed for household use only.
  12.  Also see Important Safeguards included in the Stand Mixer “Instructions” manual.

SAVE THESE INSTRUCTIONSUSING THE PASTA ROLLER AND CUTTERSSPEED SETTINGS CHART

ATTACHMENT SPEED NOODLEWIDTH SUGGESTED USES

PASTA ROLLER

 2 up to 140 mm See “Roller settings chart”

LASAGNETTECUTTER

 3 12 mm Thick Noodles

FETTUCCINE CUTTER

 5 6.5 mm Egg NoodlesFettuccine

SPAGHETTI CUTTER

 7 2 mm SpaghettiThin FettuccineLinguine Fini

CAPELLINI CUTTER

 7 1.5 mm Very Thin AngelHair-Type PastaCapelliniVery Fine Linguine

FOR DETAILED INFORMATION ON USING THE PASTA ROLLER AND CUTTERS:Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

USING THE PASTA ROLLER AND CUTTERSROLLER SETTINGS CHART

ATTACHMENT ROLLERSETTING SUGGESTED USES

PASTA ROLLER

 1 or 2 Kneading and thinning dough
3 Thick “kluski”-type noodles
4 Egg noodles
4 or S Lasagna noodles, fettuccine, spaghetti, and ravioli
6 or 7 Tortellini, thin fettuccine, and linguini fini
7 or 8 Very thin “angel-hair”-type pasta/capellini or very fine linguine

ATTACHING THE PASTA ROLLER AND CUTTERS

Before first useBefore using your attachments, remove the “Do not immerse in water” label.To avoid damage, do not wash or immerse attachments in water or other liquid. Do not wash in the dishwasher.NOTE: These attachments are designed to be used with pasta dough only. To avoid damaging your Pasta rollers and Cutters do not cut or roll anything other than pasta.

  1. Turn Stand Mixer off and unplug.
  2. For Stand Mixers with a hinged attachment hub cover: Flip-up to open.For Stand Mixers with a removable attachment hub cover: Turn the attachment knob counterclockwise to remove the attachment hub cover.USING THE PASTA ROLLER AND CUTTERS
  3. Insert attachment shaft housing into the attachment hub, making certain the power shaft fits into the square hub socket. If necessary, rotate the Pasta Roller or Cutter back and forth.The pin on the attachment housing fits into the notch of the hub rim when in the proper position.
  4. Tighten the Stand Mixer attachment hub knob until the attachment is completely secured to the Stand Mixer.

MAKING PASTAIMPORTANT: When using the Pasta Roller and Cutters, do not wear ties, scarves, loose clothing or long necklaces; gather long hair with a clasp.

  1. Prepare pasta dough (see “Recipe” section). Cut dough into sections that fit in the Pasta Roller.
  2. Pull the roller adjustment knob straight out and turn to setting 1.Release the knob, making certain the pin on the roller housing engages the opening on the back of the adjustment knob, allowingthe knob to fit flush against the roller housing.
  3. Turn Stand Mixer to speed 2. Feed flattened dough into rollers to knead. Fold dough in half and roll again. Repeat until dough is smooth and pliable and covers the width of the roller. Lightly dust pasta with flour while rolling and cutting to aid in drying and separation.
  4. Feed dough through rollers to further flatten the sheet of dough.Change the roller to setting 3, and repeat the rolling process. Continue to increase roller setting until desired thickness is reached. Do not fold the dough during this step.
  5. To make noodles, exchange the Pasta Roller for the Cutter of your choice. Feed the flattened sheets of dough through the cutter. See the “Roller settings chart” to determine the correct thickness for each type of pasta.

USING THE PASTA ROLLER AND CUTTERSDISASSEMBLING THE PASTA ROLLER AND CUTTERS

  1. Turn Stand Mixer off and unplug.
  2. Remove the Pasta Roller or Cutter from the Stand Mixer.IMPORTANT: After removing the Pasta Roller or Cutter from the Stand Mixer, be sure to clean any dried dough. See “Care and Cleaning” for details.OPTIONAL: If desired, attach the next Pasta Roller or Cutter, using the directions in the “Attaching the Pasta Roller and Cutters” section.
  3. After finishing with the Pasta Roller and Cutters replace the hub cover and tighten the attachment knob on the Stand Mixer.

RECIPE

COOKING PASTA

WARNINGFood Poisoning Hazard Do not let foods that contain perishable ingredients such as eggs, dairy products, and meats remain unrefrigerated for more than one hour.Doing so can result in food poisoning or sickness.

Add 2 tsp (10 mL) salt and 1 tbs. (15 mL) oil (optional) to 6 qt (5.7 L) boiling water.Gradually add pasta and continue to cook at a boil until pasta is “al dente” or slightly firm to the bite. Pasta floats to the top of the water while cooking, so stir occasionally to keep it cooking evenly. Use a colander to drain.Dry Pasta — 7 minutesFresh Pasta — 2-5 minutes, depending on noodle thickness.

BASIC EGG NOODLE PASTA

4 large eggs3½ cups (830 mL) sifted all-purpose flour1 tbs (15 mL) water1 tsp (2 mL) salt

Break eggs into a glass measuring cup.Check to see that the eggs measure 7/8 cup (207 mL). If less than 7/8 cup (207 mL), add water, 1 tsp (2 mL) at a time until the measurement is reached.Place flour and salt in the Stand Mixer bowl.Attach bowl and flat beater. Turn to Speed 2 and gradually add eggs and 1 tbs (15 mL) water. Mix for 30 seconds. Stop the Stand Mixer and exchange the flat beater for the dough hook. Turn to Speed 2 and knead for 2 minutes.Let dough rest for 20 minutes.Divide dough into 4 pieces before processing with Pasta Roller attachment.Follow the cooking instructions above.Yield: About 1 ¼ pound (579 g) dough

CARE AND CLEANINGCLEANING THE PASTA ROLLER AND CUTTERSThese accessories are designed to be used with pasta dough only. To avoid damaging your Pasta rollers and Cutters, do not insert anything other than pasta dough.IMPORTANT: Do not use metal objects to clean out the Pasta Roller and Cutters. Do not wash the Pasta Roller and Cutters in the dishwasher, or immerse in water or other liquids.The Pasta Roller and Cutters should be hand washed.

  1. Turn Stand Mixer off and unplug.
  2. Completely disassemble Pasta Roller and Cutters. Use the directions from the “Disassembling the Pasta Roller and Cutters” section.
  3. After cutting pasta, let Pasta Roller and Cutter’s air dry for one hour, then remove any dried dough using the Cleaning brush. If the dried dough is difficult to remove, try tapping the attachment with your hand. Use a toothpick if necessary.
  4. After cleaning out all remaining dried dough, polish the Pasta Roller and Cutters with a soft, dry cloth and store in a dry place at roomtemperature. Do not wash the Pasta Roller and Cutters in the dishwasher.

CARE AND CLEANING

MAINTENANCE

To maintain properly (annually or after 50 uses) we recommend using a light mineral oil to lubricate the gears.Add a drop of mineral oil to each of the 4 corners of the Pasta Roller and Cutters.

TROUBLESHOOTING

WARNING
Electrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove the ground prong. Do not use an adapter. Do not use an extension cord.Failure to follow these instructions can result in death, fire, or electrical shock.

If your Stand Mixer should malfunction or fail to operate while using the Pasta Roller and Cutter attachment, please check the following:

  1.  Is the Stand Mixer plugged in?
  2.  Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
  3. Turn off the Stand Mixer for 10-15 seconds, then turn it back on.If the Stand Mixer still does not start, allow it to cool for 30 minutes before turning it back on.
  4.  Did you use the correct speed for thePasta Roller and Cutters as suggested in the “Roller Settings Chart?”
  5. Did you attach the Pasta Roller orCutter attachment properly as shown in the “Using the Pasta Roller and Cutters” section?
  6. Did you follow the usage instructions as described in the “Using the Pasta Roller and Cutters” section?
  7.  Is your dough prepared according to the recipe?If the problem is not due to one of the above items, see the “Arranging for Service” section in the “Warranty”.Do not return the Pasta Roller and Cutter attachments or the Stand Mixer to the retailer, as they do not provide service.

WARRANTY AND SERVICE

KITCHENAID ® PASTA ROLLER AND CUTTERS WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA

 

This warranty extends to the purchaser and any succeeding owner for Pasta Roller and Cutters operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

Length of Warranty: One Year Full Warranty from date of purchase.
KitchenAid Will Payfor Your Choice of: Hassle-Free Replacement of your Pasta Roller and Cutters. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.ORThe replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.
KitchenAid WillNot Pay for: A. Repairs when your Pasta Roller and Cutters are used in other than normal single-family home use.B. Damage resulting from accident, alteration, misuse or abuse.C. Any shipping or handling costs to deliver your Pasta Roller and Cutters to an Authorized Service Center.D. Replacement parts or repair labor costs for Pasta Roller and Cutters operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIESIMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.IF THIS PRODUCT FAILS TO WORK AS WARRANTED, THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

WARRANTY AND SERVICEHASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO

We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Pasta Roller and Cutters should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of chargeand arrange to have your original Pasta Roller and Cutters returned to us. Your replacement unit will also be covered by our one-year limited warranty.If your Pasta Roller and Cutters should fail within the first year of ownership, simply call our toll-free Customer eXperience Centerat 1-800-541-6390 Monday through Friday.Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address. (No P.O. Box numbers, please.) When you receive your replacement Pasta Roller and Cutters, use the carton, packing materials, and prepaid shipping label to pack up your original Pasta Roller and Cutters and send them back to KitchenAid.

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

We’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Pasta Roller and Cutters should fail within the first year of ownership, we will replace your Pasta Roller and Cutters with an identical or comparable replacement. You’re replacement unit will also be covered by our one-year limited warranty.If your Pasta Roller and Cutters should fail within the first year of ownership, simply call our toll-free Customer eXperience Center at 1-800-807-6777 Monday through Friday.Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address.When you receive your replacement Pasta Roller and Cutters, use the carton, packing materials, and prepaid shipping label to pack up your original Pasta Roller and Cutters and send them back to KitchenAid.

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

In the United States and Puerto Rico:For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:Customer eXperience Center, KitchenAid Small Appliances,P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States andPuerto Rico:Consult your local KitchenAid dealer or the store where you purchased the Pasta Roller and Cutters for information on how to obtain service.For service information in Canada:Call toll-free at 1-800-807-6777.For service information in Mexico:Call toll-free 01-800-0022-767.

FOR DETAILED INFORMATION ON USING THE PASTA ROLLER AND CUTTERS:Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes, and tips on how to use your Pasta Roller and Cutters.

®/™ © 2015 KitchenAid. All rights reserved. Used under license in Canada.WARRANTY AND SERVICE

PRODUCT QUESTIONS OR RETURNSQUESTIONS SUR LE PRODUIT OU LES RETOURSPREGUNTAS SOBRE EL PRODUCTO O DEVOLUCIÓNESUSA: 1.800.541.6390 | KitchenAid.comCANADA: 1.800.807.6777 | KitchenAid.ca

FOR THE WAY IT’S MODE®.

®/™ © 2015 KitchenAid. All rights reserved. The design of the Stand Mixer is a trademark in the U.S. and elsewhere. Used under license in Canada.

W10818898A

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,