KitchenAid Stand Blender KSB6060/70 User Manual

Table of Contents

Stand BlenderKSB6060/70

PARTS AND FEATURES

1. Ingredient-measuring cap	8 Start/Stop toggle switch
2 Lid	9 Pulse toggle switch
3 Blender jar	10 Control dial
4 Blade	11 Removable blender jar pad
5 Power cord (not shown)	12 Jar handle
6 Base	13 Tamper
7 Status indicator light

PRODUCT SAFETY

Your safety and the safety of others are very important.We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.This symbol alerts you to potential hazards that can kill or hurt you and others.All safety messages will follow the safety alert symbol and either the word “DANGER?” or “WARNING.” These words mean: You can be killed or seriously injured if you don’t immediately follow instructions. You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions.
To protect against risk of electrical shock do not put Stand Blender base in water or other liquid.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Avoid contacting moving parts.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Facility for examination, repair, or electrical or mechanical adjustment.
Do not use outdoors.
Do not let cord hang over edge of table or counter.
Keep hands and utensils, other than the tamper provided, out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. The cover must remain in place when using the tamper through the cover opening. A scraper may be used but must be used only when the blender is not running.
Blades are sharp. Handle carefully.
The use of attachments, including canning jars, not recommended or sold by the manufacturer may cause a risk of injury to persons.
Do not use appliances for other than intended use.
Always operate blender with cover in place.
When blending hot liquids or ingredients, Lid Center Cap should remain in place over the lid opening. Always start on the lowest speed and slowly ramp to desired speed when blending hot liquids or ingredients.

SAVE THESE INSTRUCTIONSThis product is designed for household use only.

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard Plug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death, fire, or electrical shock.Voltage: 120 VFrequency: 60 HzIntensity (Amp.): 15 AmpsNOTE: If the plug does not fit in the outlet, contact a qualified electrician.Do not modify the plugin anyway.Do not use an adapter.Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.

MOTOR HORSEPOWER

Motor horsepower for the blender motor was measured using a dynamometer, a machine that laboratories routinely use to measure the mechanical power of motors. Our 3.0 peak horsepower (HP) motor reference reflects the horsepower output of the motor itself and not the Blender’s horsepower output in the blender jar. As with any blender, the power output in the jar is not the same as the horsepower of the motor itself. This motor delivers 2.40 peak HP in the jar, enabling your Blender to deliver robust power for all your recipes.

GET STARTED

First, clean all parts and accessories (see “Care and Cleaning” section). Be sure the countertop beneath the Blender and surrounding areas are dry and clean.

BLENDER FUNCTION GUIDE

The Blender features Variable Speed and Pulse functions that allow you to customize your blending for any recipe. We encourage you to experiment to find the best speed for your favorite recipes.

Setting	Description	Suggested Items to Blend
Pulse	Allows precise control of the duration and frequency of blending.	Savory crumb topping, Sweet crumb topping, Meat salad for sandwich filling	Chopped fruits, Chopped vegetables, Ice crush
Variable speeds	Offers ultimate control of the blender.	Fruits, Vegetables, Nuts, Dips, Frozen desserts	Soups, Sauces, Doughs, Butters
Max	In Max speed, the Blender will run continuously on high until the Start/Stop switch is pressed, or after 6 minutes elapse.	Soups, Purées	Smoothies, Frozen Drinks

USING THE BLENDER

To blend, put the items into the blender jar. Secure the Lid with the ingredient measuring cap.Plug the Blender into a grounded 3-prong outlet. Next, place the blender jar on the base, making sure that it is fully aligned on the jar pad.

NOTE: Do not fill blender jar past the topmost measurement mark, especially when blending liquids.

Flip the power switch to ON (I). The status indicator light will flash, indicating that the Blender is in Standby mode and ready to operate.Flip the START/STOP toggle switch up or down to start.The status indicator light will now be solid. Turn the control dial to your desired speed. See the “Blender function guide” for more details.

Using the Tamper: Remove the ingredient measuring cap only. Stir or press contents down towards the blade. When finished, replace the ingredient-measuring cap before resuming blending.The Pulse function may also be used on its own as a separate blending function while the Blender is in Standby mode.

NOTE: Allow the Blender to come to a complete stop before removing the lid and pouring your blended ingredients.After blending, flip the START/STOP toggle switch up or down to stop. Unplug the Blender before removing the blender jar.

CARE AND CLEANING

NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in water. To avoid scratching, do not use abrasive cleaners or scouring pads.Empty the blender jar. Fill jar with 24 oz. of hot water and add 3-4 drops of liquid dishwashing detergent. Place the lid on the blender jar, and make sure the blender jar is fully in place on the blender base.Rotate the control dial to Max. Flip the START/STOP toggle switch up or down to start. Run the Blender for 35 seconds. Flip the START/STOP toggle switch up or down to stop. When the blade stops spinning, pour out the soapy water, and rinse the blender jar with warm water.Unplug the Blender before cleaning. Wipe the base and the cord with a warm, damp cloth and dry with a soft cloth.Dishwasher-safe, top rack only:Lid, Tamper, and Ingredient-measuring cap.Dishwasher-safe, bottom rack only:Blender Jar. All parts may also be washed by hand with a damp cloth and warm soapy water, and then rinsed with warm water and dried with a soft cloth.

SANITIZING THE BLENDER

Remove any remaining contents from the blender jar.
Prepare a 200 ppm sodium hypochlorite solution* using 1.75 L of hot water in the blender jar. Place the lid on the blender jar, and make sure the blender jar is fully in place on the blender base.
Run the Blender on the Max Speed setting for 35 seconds. Flip the START/STOP toggle switch up or down to start the Blender.
Turn off the Blender and let the sanitizing mix sit in the blender jar for an additional 2 minutes.
Pour out the sanitizing solution mix. Do not rinse the blender jar.
Place the lid on the blender jar. Make sure the empty blender jar is fully in place on the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse the jar after sanitizing.
Allow the blender jar to air dry.* To prepare a 200 ppm sodium hypochlorite solution: use 6.67 ml household bleach (with a 5.25% sodium hypochlorite concentration) in 1.75 L of hot water.FOR DETAILED INFORMATION ON USING AND CLEANING THE BLENDER Visit www.kitchenaid.com/quickstart for additional instructions with videos, inspiring recipes, and tips on how to clean your Blender.

TROUBLESHOOTING GUIDE

Electrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result in death, fire, or electrical shock.

Problem	Solution
Status indicator light is off while unit is plugged in and On/Off switch is in On position:	After 10 minutes of no activity, the blender will go into Sleep mode. Flip START/STOP toggle switch up or down to bring the blender back into Standby mode.
Status indicator light is flashing orange color:	Indicates error mode. This can be caused by: using a spatula or any other utensil that could obstruct the blade to freely spin, or having an ice cube or hard food in a location that locks up the blade.Unplug the blender and remove the jar from the base, and clear the items. Place the jar back on the base, and then turn on the blender to continue regular use.
Blender stops after continuously running for 6 minutes:	This is normal operation for variable speed functions. Refer to “Blender function guide” for details.
Blender stops while blending:	If blender stops prior to the completion of the selected function, contact an authorized service center for assistance.
If the ingredients of a recipe aren’t blending:	An air pocket can be created around the blade causing the ingredients to miss the blade. Use the tamper to push ingredients down into the blade. Refer to “Using the commercial blender” section. For certain recipes, adding more liquid may also assist in incorporating the ingredients.
Blender jar overflows:	Unplug and remove the jar pad from the housing to make sure the base is fully dry. The control dial can be detached by pulling it off with force. Wipe dry, and then replace it back.
Troubleshooting does not solve the problem:	See the “Warranty and service” section. Contact an Authorized Service Center for assistance.Do not return the Blender to the retailer — retailers do not provide service.

WARRANTY AND SERVICE

KITCHENAID® BLENDER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Blenders operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

Length of Warranty: Five Year Full Warranty from date of purchase.KitchenAid Will Pay for Your Choice of:Hassle-Free Replacement of your Blender. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390. OR The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Facility.

KitchenAid Will Not Pay for:A. Repairs when your Blender is used in other than normal single-family home use.B. Damage resulting from accident, alteration, misuse, or abuse.C. Any shipping or handling costs to deliver your Blender to an Authorized Service Facility.D. Replacement parts or repair labor costs for Blender attachments operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIESIMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO FIVE YEARS, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. IF THIS PRODUCT FAILS TO WORK AS WARRANTED, THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

HASSLE-FREE REPLACEMENT WARRANTY–50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICOWe’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Blender should fail within the first five years of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Blender returned to us. Your replacement unit will also be covered by our five years limited warranty. If your Blender should fail within the first five years of ownership, simply call our toll-free Customer eXperience Center at

1-800-541-6390 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address (no P.O. Box numbers, please). When you receive your replacement Blender, use the carton, packing materials, and prepaid shipping label to pack up your original Blender and send it back to KitchenAid.

HASSLE-FREE REPLACEMENT WARRANTY–CANADAWe’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Blender should fail within the first five years of ownership, we will replace your Blender with an identical or comparable replacement. Your replacement unit will also be covered by our five years limited warranty. If your Blender should fail within the first five years of ownership, simply call our toll-free Customer eXperience Center at

1-800-807-6777 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address. When you receive your replacement Blender, use the carton, packing materials, and prepaid shipping label to pack up your original Blender and send it back to KitchenAid.

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTSIn the United States and Puerto Rico:For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:Customer eXperience Center,KitchenAid Small Appliances,P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and Puerto Rico:Consult your local KitchenAid dealer or the store where you purchased the Blender for information on how to obtain service.For service information in Canada:Call toll-free 1-800-807-6777.For service information in Mexico:Call toll-free 01-800-0022-767.

PRODUCT QUESTIONS OR RETURNSQUESTIONS SUR LE PRODUIT OU LES RETOURSPREGUNTAS SOBRE EL PRODUCTO O DEVOLUCIÓNESUSA: 1.800.541.6390 | KitchenAid.comCANADA: 1.800.807.6777 | KitchenAid.caMEXICO: KitchenAid.com.mxLATIN AMERICA: KitchenAid-Latam.com

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-20

KitchenAid

admin

Tags:

KitchenAid, KSB6060, KSB6070, Stand Blender