Kmart 43029648 Parquetry ENT Unit
Assembly Instruction
CARE INSTRUCTION
Keep away from water and direct sunlight. For indoor and domestic use. Wipe clean with a soft dry cloth. Check and tighten all parts regularly.
WARNINGS:Do not stand or sit on the unit. Do not lean on the product. Do not drag the product. Use only on a flat surface. Do not use until all screws, bolts and knobs are firmly secured. This product contains small parts and sharp points, keep away from children and babies. Adult assembly required. Failure to follow these warnings could result in serious injury.MAXIMUM SAFE LOAD: 25kg FOR TOP, 10kg FOR INSIDE SHELF.
Hardware List
 |
A |
6x35mm |
10pcs |
 |
B |
15×9.Smm |
10pcs |
 |
C |
6x30mm |
28pcs |
 |
D |
6x50mm |
2pcs |
 |
E |
4x55mm |
8pcs |
 |
F |
4pcs |
|
 |
G |
3.Sx12mm |
24pcs |
 |
H |
2x16mm |
14pcs |
 |
I |
4x35mm |
10pcs |
 |
J |
8pcs |
Do not tighten the screws fully during assembly.Fully tighten screws after the final assembly steps.
Step 1:All edge banding plates face outwards.
Step 2:All edge banding plates face outwards.
Step 3:All edge banding plates face outwards.
Step 4:
Step 5:
Step 6:Note: the back panel attach to the back side.
Step 7:
Step 8:
[xyz-ips snippet=”download-snippet”]