Instruction ManualSwag 1p Flat Pack( Keycode:42914877 )
Product Image- |
Parts list- | ||
|
No |
Part name | Quantity |
Image |
| 1 | Swag body | X1 |  |
| 2 | Fiberglass poles A | X1 |  |
| 3 | Fiberglass poles B | X1 |  |
| 4 | Foam mattress | X1 |  |
| 5 | Guy rope | X3 |  |
| 6 | Pegs | X10 |  |
| Please read all instructions carefully and make sure you have all parts before starting to assemble. |
Assembly steps-
Step 1,
Take out the fibreglass poles from bag. Assemble the poles by each section joined together with ferrule.
Pole A
Pole B
Step 2,Spread out the swag. Insert the pole A through the pole sleeve on the swag.
Step 3,Erect the swag with pole arch and insert the pole end with pin into the right at the bottom of each tent corner. Erect the pole B in rear. Attach the hooks to each pole.
Step 4,Secure the pre-attached guy rope and peg down.Spread out the foam mattress, put into swag on the bottom. The swag is complete.
Warning –
KEEP ALL FLAME AND HEAT SOURCE AWAY FROM THIS TENT FABRIC.DO NOT USE CANDLE, MATCHES, OR OPEN FLAME OF ANY KIND IN OR NEAR THE TENT.DO NOT COOK INSIDE THE TENT.DO NOT SMOKE IN THE TENT.DO NOT STORE FLAMMABLE LIQUIDS INSIDE THE TENT.EXTINGUISH OR TURN OFF ALL LANTERNS BEFORE GOING TO SLEEP.CHOOSE A LEVEL SITE TO ERECT TENT THAT IS CLEAR FROM OVERHANGING BRANCHES AND NOT.IN LOW-LYING AREAS THAT COULD BE SUBJECT TO FLOODING.
Care instruction-
WIPE CLEAN WITH A DAMP CLOTH. DO NOT USE ABRASIVE MATERIALS AND SOLVENTS. ENSURE TENT IS CLEAN & DRY BEFORE PACKING OR STORING TO PREVENT DAMAGE FROM MOULD & MILDEW.Made In China
[xyz-ips snippet=”download-snippet”]