Knpaimly BS5 Wireless Earbuds
Thank you for purchasing our product. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
Please note before use
There is a static sticker on the charging connector at the bottom of the Headphones. Please tear the static stickers before using the Headphones.
Package Contents
- Wireless Earbuds – 1 pair (left and right)
- 1x Charging Case
- 1x Type-C Charging Cable
- 1x User Manual
At a Glance Earbuds
Charging Case
How to Wear
Insert the earbud into your ear and rotate to fit comfortably.
Earbuds LED Indicator Guide
| System State Indicator Activity | |
| Power on | The LED indicator stays Red and blue lights flash alternately |
| Power off | The LED indicator flashes red. |
| Pairing mode | The LED indicator flashes red and blue alternately. |
| Charging | The LED indicator stays red. |
| Fully Charged | The LED indicator goes off. |
Charging Case Indicator Guide
| System State Indicator Activity | |
| Charging | The charging case bottom indicator flashes orange slowly. |
| Fully charged | The charging case bottom indicator stays orange. |
Using Your BS5
Charge the earbudsPut the earbuds into the charging case.Note: When your earbud battery life is low, you will hear a voice reminder.
Charge the charging case
- Plug the small end of the Type-C cable into the Micro USB port of the charging case.
- Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
Note: It takes approximately 2 hours to fully charge the charging case. A fully charged charging case can charge the earbuds approximately 6-7 times.
Power on & off
Automatic operation
Power on: Open the lid of the charging case and take the earbuds out.Power off: Put the earbuds back into the charging case.
Note: When the charging case is out of power, putting the earbuds back in the charging case will not turn the earbuds off.
Manual operation
Power on/off: Tap and hold the touch button on the left/right earbud for 5 seconds.
Note: When the two earbuds are paired with the phone, turn off one earbud manually will make the other one be off at the same time.
Pairing & Connectivity
- Take the earbuds out of the charging case and the LED indicator on the earbud will flash red and blue alternately.Notes:● There is a static sticker on the charging connector at the bottom of the Headphones. Please tear the static stickers before using the Headphones.● Knpaimly BS5 Bluetooth earbuds are compatible with all Bluetooth enabled devices of Android / iOS / Windows. iPod, iPad and Tablet are also supported.
- Turn on Bluetooth in your phone, Choose “BS5” from the list of found Bluetooth devices on your Bluetooth device to pair.Notes:● If pairing failed, put the earbuds back into the charging case make sure that they have been turned off. Then pair the earbuds with your Bluetooth device again.● When the earbuds are on but not paired with a Bluetooth device, they will be automatically off after 5 minutes.
Notes:● There is a static sticker on the charging connector at the bottom of the Headphones. Please tear the static stickers before using the Headphones.● Knpaimly BS5 Bluetooth earbuds are compatible with all Bluetooth enabled devices of Android / iOS / Windows. iPod, iPad and Tablet are also supported.
Notes:● If pairing failed, put the earbuds back into the charging case make sure that they have been turned off. Then pair the earbuds with your Bluetooth device again.● When the earbuds are on but not paired with a Bluetooth device, they will be automatically off after 5 minutes.Primary/Secondary mode
These earbuds have primary-secondary switch function.
- When the earbuds have been connected to a Bluetooth device, take out either of the two earbuds, it can be connected and used normally. During this period, you can take out the other one and they will pair with each other so you can use both of the earbuds.
- When both earbuds are connected to your phone, no matter which one is put back to the charging case, you can use the other one without interruption.
Please following the steps as below when only one earbud works:
- Long press the function touch button for 10 seconds (flashes red) to remove the pairing;
- Put the L / R earbuds into the charging box at the same time to reset and the two earbuds will connect to each other automatically again;
- Put the earplugs into the charging box for 5 seconds After , then take out two earplugs, Resetting successfully.
Smart touch Control usage
Decline Incoming call: click one earbud.Play/ Pause: Short touch of one earbud.Pick up/ Hang up phone call: double click one earbud.Siri: Touch and hold for 2s.Volume +: Touch 2 times of Left Earbud.Volume – : Touch 2 times of Right Earbud.Previous Song: Touch 3 times of Left earbud.Next Song: Touch 3 times of Right earbud.Power on: Long press L/R touch button for 3 seconds, red and blue lights flash alternatelyPower off: Hold down the L/R touch button for 5 seconds and the red light will go on for 1 second
Specifications
| Model | BS5 |
| Bluetooth Version | V5.0 |
| Battery | 45mAh (each earbud), 650mAh (charging case) |
|
Charging Time |
Approximately 1 hour (earbuds),
2 hours (charging case) |
| Input Rating | DC 5V 1A |
|
Music Playing/Call Time |
4-5 hours per charge Up to 35 hours
(with charging case) |
| Bluetooth Connection Distance | Up to 50 feet (No obstacle between) |
| Supporting Protocols | A2DP/HFP/HSP/AVRCP |
| Working Temperature | -10°C to 40°C |
Safety and Warranty
Important safety instructions
- Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention.
- If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product.
- This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy ?never allow children to play with this product. Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
- Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits which could result in a fire or electric shock.
- None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
- Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
- Keep all products, cords, and cables away from operating machinery.
- If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
- Do NOT use in areas where there are explosive hazards.
- Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).
- Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, water skiing, surfing, etc.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the earbuds.
- Dispose of the product according to local standards and regulations.Note: Always drive safely, avoid distractions and follow local laws!
- Using the earbuds while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the earbuds with both ears covered while driving is not permitted in certain jurisdictions. Check your local laws.
- Use with caution while using your earbuds when you are engaging in any activity that requires your full attention. While engaging in any such activity, removing the earbuds from your ear or turning off your earbuds will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving.
- When using and charging this product, basic precautions should always be followed, including the following:
Read all the instructions before using the charging case.
- To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
- Do not expose charging case to water, rain, liquids or snow.
- Use of a power supply or charger that is not recommended or sold by power pack manufacturer may result in a risk of fire or injury.
- Do not use the charging case in excess of its output range.
- Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury.
- Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or extreme temperature may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
Seller Warranty Description
We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. 18-month quality warranty time, friendly customer service, If you have any questions about the product, please contact us, We will solve the problem for you as soon as possible.
Please contact us at any time 24/ 7 / 365if you have any questions or concerns:email: [email protected]
[xyz-ips snippet=”download-snippet”]