kogan Ergolux RX8M Massage Gaming Office Chair User Guide

RX8M MASSAGE GAMINGOFFICE CHAIRELCHRMSGRCB, ELCHRMSGBCB, ELCHRMSGBBA & ELCHRMSGBGAUser Guide

COMPONENTS

Lay all components out on a clean floor and ensure all parts are included. If any pieces are missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.

ASSEMBLY

Step 1:

• Insert the chair wheels (N) into the sockets ensuring the socket is aligned correctly.
• Insert the gas lift piston (E) into the base (F) and place the protective plastic tube (O) over the top.

Step 2:Slide the backrest (A) onto the seat (B) and attach the armrests (C) using fasteners (M & K).Note: The right armrest has a pocket for storing the remote control.

Step 3: Installing the reclining mechanism.Attach the fixture (D) to the bottom of the seat using fasteners (H & J).

Step 4:Attach the piston bracket (S) to the seat base with bolt (H).

Step 5:Attach the piston (T) to the back of the seat and secure it in place with a screw and nut (J).

Step 6:

• Attach the piston (T) to the piston bracket (S) and secure using bolt and nut (G).
• Feed the tension cable through the hoop of the piston and fix the ball on the end of the cable into the piston lever. Tighten with the attached nuts.

Step 7:

• Connect the two white cables together then connect the remote control (R) and the power adapter (Q) to their respective connections.Note: The remote cable is thicker than the power cable connector.

Step 8:Place the assembled chair onto the base.

REMOTE OVERVIEW

Note: The above image is for reference only and may differ from the final product.

Pressing the Mode button will cycle through different massage modes.

SPECIFICATIONS

NOTESNeed more information?We hope that this user guide has given you the assistance needed for a simple setup.For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com