40″ FULL HD LED TVSERIES 7 GF7400(KALED40GF7400GA)
COMPONENTS
A Kogan 40″ FULL HD LED TVB Remote controlC Stand (x2)D M4 x 15mm screw (x4)E AAA battery (x2)F Quick-start guideG Warranty card
NOT INCLUDEDPhillips head screwdriver, antenna cable, broadband internet connection.
REMOTE CONTROL OVERVIEW
POWER: Turn on the TV/Standby.
AUDIO: Switch the audio channel when DVD or multimedia playing. I/II:In the TV condition, press this button to select the stereo mode.
SLEEP: Auto Power Off Timer.
SUB: Select subtitle of media video file.(needs the support of disk or file
FAV: Show the list of favourite channels.
NUMBER KEYS: Change the channel directly.
DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or RADIO mode.
Return to the previous channel tuned.
MUTE: Mute or restore the sound.
VOL: Increase and decrease volume.
CH: Next and Previous channel.
REPEAT: Repeat mode.
INFO: Show information about the current program.
SOURCE: Press to change signal source.
NAVIGATION KEYS (Up, Down, Left, Right and OK): To move in the menus and confirm settings.
MENU: Display menu page.
EXIT: Exit the Menu.
P.SIZE: Press to select the different picture size. Displays the main index in Teletext mode.
GUIDE: Show the Electronic Program Guide. : Reveals hidden information such as the answers to a quiz in TELETEXT mode.
S.MODE: Setting audio options. : Freeze a multi-page changing on Teletext mode.
P.MODE: Output image mode selection. : Displays the top, buttom or all of page.
: Play/Pause.TS: In DTV mode, press TS button to start the delay function, press the button to start playing delay program, press the button to terminate the delay functions.
: Stop playback.
TEXT: Turns on and off the Teletext function.
REC/ : In DTV mode , press REC button to start recording, press button to stop recording.
: Previous file or chapter.
: Next file or chapter.
: Fast forward playback.
: Fast rewind playback. Press the appropriate colour to direct access functions in TELETEXT or EPG OSD mode.
ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTEDSpread cushioning flat to lay the TV on. This will help to prevent damage.
Stand assemblya. Attach stand to base of TV.b. Insert two 15mm screws and use Phillips head screwdriver (not supplied) to tighten.c. Repeat these steps for second stand.
Remote control assemblya. Open the battery compartment cover on the back side.b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.c. Replace battery compartment cover.
Connect to antennaa. Connect an antenna cable (not supplied) via the `ANT’ input port at the back of the TV.b. Ensure the antenna cable is also connected to a working antenna, either via an antenna wall socket in your home, or directly.
Turning TV onPlug the power cord into a suitable power outlet, then press the POWER () button on the remote control, making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower side of the back panel on the TV.
TURNING TV OFFPress the POWER () button on the remote control to enter standby mode. To power down the TV completely, unplug the power cord from the power outlet. Do not leave your set in standby mode for long periods of time. If you will not use the TV for a long time, it is recommended to unplug the set from both the power outlet and aerial.
SETTINGS
When turning the TV on for the first time, the Setup Wizard screen will appear. Use the , and OK buttons to navigate the following options.
Select LanguagePress button to select the language to be used for menus and message.
Select CountryPress button to highlight country menu.Press button to select the country you want to.
Select Energy ModePress button to select the Energy mode.Auto TuningFirst tuning TV, press Menu and left arrow button to skip TV tuning. Second tuning DTV, press Menu and left arrow button to skip DTV tuning.Select Input SourcePress SOURCE button to display the input source list, Press or SOURCE button to select the input source you want to, Press OK button to enter the input source, Press EXIT button to quit.
BASIC TROUBLESHOOTING
Poor picture and sound quality
Try a different channel
Adjust the antenna
Check all connections
No picture or sound in TV status
Try another channel
Press the TV/AV button
Make sure TV is plugged in
Check the antenna connection
No sound or sound is too low at maximum volume
Check the volume settings on any external speakers connected to your television
Adjust the TV volume accordingly
Check another channel or input
Check that MUTE hasn’t been turned on
No colour, wrong colour or tints
Make sure the program itself is broadcast in colour
Select the picture menu, then adjust the colour and tint submenus
Picture rolls vertically
Check all connections
Blurred or snowy picture, distorted sound
Check direction, location and connections to your antenna
Issues may be caused by the use of an indoor antenna (poor signal)
Remote control malfunctions
Replace remote control batteries
Check battery terminals
Remote is out of range, move closer to TV
Remove any obstructions between remote and IR sensor of TV
Make sure the power cord to your TV is plugged in and turned on
Image is not centred on the screen
Adjust the horizontal and vertical position
“No Signal” on HDMI source
Test the device with a di erent HDMI cable
Plug the device into another HDMI port
Try a di erent device connected to the same cable and port
Perform a factory reset on your TVFor our full TV troubleshooting guide and extended User Manual for this TV, head online to help.kogan.com
Need more information?This is a Quick Start Guide, and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions and features can be found online at help.kogan.com