34” CURVED WQHD ULTRAWIDE144HZ USB-C FREESYNC HDRGAMING MONITOR (3440 x 1440)KAMN34RQUCSAUSER GUIDE
SAFETY & WARNINGS
- Read all instructions before using the monitor and retain them for future reference.
- Unplug the monitor before cleaning it.
- Use a clean, slightly dampened cloth to wipe the main monitor body.
- To clean the screen, turn it off unplug it, and wait for it to cool completely, then wipe it with a dry microfiber cloth.
- Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
- This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
- Do not insert any object or spray any liquid into the vents.
- Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat.
- Place monitor in well ventilation room.
- Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
- Unplug the monitor if it is not going to be used for an extended period.
- Do not place heavy objects on the monitor, its power cord, or any connected cable.
- Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
- Before disposing of any packaging, place all items on a soft, clean, and flat surface to ensure all components are accounted for.
The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
COMPONENTS
OVERVIEW
- Power button
- Power input
- HDMI
- DisplayPort
- USB-C
- USB upstream
- USB 3.0
- USB 3.0
- Audio out (3.5mm jack)
ASSEMBLY
Before disposing of any packaging, place all items on a soft, clean, and flat surface to ensure all components are accounted for.WARNING: The panel of the monitor is fragile. Keep the foam underneath the monitor screen while assembling the stand.
| Carefully remove the monitor, stand arm, and stand base from the box. | |
 |
Attach the stand base to the stand arm using the provided M6 screw. |
|
Insert the stand arm into the rear of the monitor and push down until itis firmly connected. |
 |
Lift the monitor up straight and remove the bottom foam. Stand the monitor up on the installed base. |
VESA MOUNT
VESA mounting pattern 100 x 100mm, screw size M4.Note: VESA mount or mounting accessories are NOT included.
- Open the box, remove the monitor keeping the protection foam attached and gently place it on a desktop or table.
- Remove the foam covering the rear of the monitor. Press the release button to remove the stand plate. If the monitor is already attached to the stand, remove the stand.
- Assemble the mount as per the instructions provided with the mount.
CONNECTIVITY
Power
- Connect the included power cable to the monitor power port.
- Connect the power cable to the power adapter.
- Connect the power adapter to the power outlet.
Audio
- Connect a 3.5mm audio cable to the audio out on the monitor.
- Connect the audio cable to the 3.5mm port on your headphones or speakers.Note: The monitor may need to be set as the PC’s default sound output device.
USB Upstream
Before using the two USB 3.0 ports you will first need to connect the monitor to your computer through the USB upstream input.
USB
The two USB 3.0 ports can be used to connect USB accessories to the monitor.
USB-C
Use the included USB-C cable to connect the monitor to your computer.
DisplayPort
Use the included DisplayPort cable to connect the monitor to your computer.
HDMI
Use an HDMI cable to connect the monitor to your computer.
OPERATION
- Connect the monitor to the input device via HDMI/DisplayPort or USB-C.
- Connect the power cable to the monitor, then connect the other end directly to a power socket.
- Use the power button to turn the monitor on.
Monitor Control
You can easily control the functions of the monitor by pressing the Power button or moving it left/right (
/ ) with your finger.
| Button | Action | Description | |
|
 |
Press in | Turn the monitor on/off. |
|
|
Push left | Enable the main menu or select the menu item. |
|
Push right | Exit from the main menu or return to the upper menu. | |
 |
 |
Push up | Select menu items or increase the setting values of the selected menu item. |
 |
Push down | Select menu items or decrease the settingvalues of the selected menu item. |
FreeSync
- In order to use this feature, ensure your hardware has FreeSync capability and the graphics drivers are fully up to date.
- After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.
- See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.
Display settings
When first using this monitor it will automatically configure the optimal display settings.The On-Screen Display (OSD) Menu can be used to adjust your monitor’s display settings to your liking. To access the OSD:
- Push the Power button right to activate the navigation window.
- Press the Power button to enter the OSD menu.
- Press the Power button up and down to navigate the functions.
- With the desired function highlighted, push the Power button to enter the sub-menu.
- After making your desired adjustments push the Power button in to confirm the settings and exit the current screen.
- Press the Power button left to exit the current screen.
- Refer to the following pages for a detailed list of the OSD menu functions.
| Menu | Sub-Menu | Options | Description |
| Picture | Brightness | -0-100 | Adjust display brightness |
| Contrast | -0-100 | Adjust display contrast | |
| DCR | On/ Off | Turns dynamic contrast ratio on/off | |
| ECO | Standard. Text, Game. Movie, FPS, RTS | Preset color modes | |
| Colour | Colour Temperature | Normal | Select color temperature mode or allow manual color configuration (USER) |
| Warm | |||
| Cool | |||
| USER | |||
| Red | -0-100 | Adjust the red value (USER mode only) | |
| Green | -0-100 | Adjust the green value (USER mode only) | |
| Blue | -0-100 | Adjust the blue value (USER mode only) |
| OSD Setting | Language | English. P114011 Z. 121-:4-01, PycorsiA, Espanol, Francais.I I 4. in | Set OSD language |
| OSD H-Position | 0-100 | Adjust OSD horizontal position | |
| OSD V-Position | 0-100 | Adjust OSD vertical position | |
| OSD Transparency | 0-100 | Set OSD overall transparency | |
| OSD Time Out | 0-100 | Set how long the OSD remains open after the last input | |
| Setup | Input Source | Auto Source. DP. USB-C, HDMI | Select input source or allow manual selection |
| Mute | On, Off | Enable or disable monitor speaker output | |
| Volume | 0-100 | Adjust monitor speaker volume | |
| Audio Source | USB-C, DR HDMI | When opening Multi-Window, allows you to select an audio source from different sources | |
| USB Select | PC, USB-C | When open Multi-Window. PC or USB-C can be selected for this function. | |
| Reset | N/A | Restore factory defaults |
| Other | Aspect Ratio | Wide Screen | Select the display’s aspect ratio |
| 4:03 | |||
| 1:01 | |||
| Auto | |||
| Low Blue Light | Off | Blue light reduction adjustment | |
| Low | |||
| Medium | |||
| High | |||
| Max High | |||
| Response Time | On, Off | Enable or disable overdrive for foster response time | |
| FreeSync | On, Off | Enable or disable AMD FreeSync | |
| HDR | On. Off. Auto | Enable or disable HDR | |
| LED Mode | On. Off | Press to turn the display backlight on or off. | |
| MPRT | On, Off | When the refresh rate reaches 85Hz MPRT can be turned on. |
| Multi-Window | Multi.Week | Off | Select MiteYindoce mode |
| PIP Mode | |||
| PBP 2Won | |||
| PBP Men | |||
| Sub WI n2 Input | USB-C. DP. MIMI | Select source to be dog: bayed n the second wit | |
| Sub Win3 Input | USB-C. DP.1-1DMI | Select source to be displayed in the third window | |
| PIP Sue | Snnstl. Medium. Large | Change the Ode of the subwindow n PIP mode | |
| PIP Position | Top Right | Change the position of the sub-window in PIP mode | |
| Top Le’ | |||
| Bottom R g -,! | |||
| Bottom Left | |||
| Swop | Moira Window | Swap between the main and sub window | |
| Sao Window |
DISPLAY MODES & GAME PLUS
Display modesPress the Power button left to switch between the preset display modes. These modes include Standard, Text, Movie, Game, FPS, and RTS. These modes are designed to optimize settings according to your activity. Standard mode is suitable for most activities.
Game plusPress the Power button down to switch Game plus modes. These overlay icons are primarily designed to assist aim during first-person shooter games.
SPECIFICATIONS
| Screen size | 34” |
| Aspect ratio | 21:09 |
| Brightness | 300cd/m²(typical) |
| Panel | VA |
| Resolution | 3440 x 1440 |
| Refresh rate | 144Hz |
| Response time | 4ms |
| Viewing angle | ≥178°(H) / 178°(V) |
| Contrast ratio | 3000:1 |
| VESA mounting | 100 x 100mm |
| Colours | 16.7M |
| Signal input | 1 x HDMI 2.0, 1 x DP 1.4, 1 x USB-C, 3 x USB3.0 |
| Power | DC24V — 5A |
| Audio | |
| Speakers | Yes |
| Audio out | Yes |
| Accessories | |
| Power cable | Yes |
| DisplayPort cable | Yes |
| USB-C cable | Yes |
| USB3.0 cable | Yes |
| Additional functions | |
| Low blue light | Yes |
| Flicker free | Yes |
| Physical dimensions | |
| Dimensions (with stand) | 807.5 x 463.4 x 249.2mm (mm) |
| Dimensions (without stand) | 807.5 x 364.0 x 130.2mm (mm) |
| Net weight | 7.65kg |
| Gross weight | 10.5kg |
Need more information?We hope that this user guide has given you the assistance needed for a simple setup.For the most up-to-date guide for your product,as well as any additional assistance you may require,head online to help.kogan.com
report this ad[xyz-ips snippet=”download-snippet”]