kogan KAMOP131STMA 12-In-1 Steam Mop User Guide

kogan KAMOP131STMA 12-In-1 Steam Mop

 

SAFETY & WARNINGS

Please read these instructions carefully. Failure to follow these instructions will void your warranty. Read all instructions before using the steam cleaner.

When using an electrical appliance, basic precautions should always be followed, including the following:

• Verify that the voltage indicated on the product corresponds with the voltage of the outlet.Rating voltage: AC 220-240V 50/60Hz 1300W
• This product is designed for domestic use only.
• Do not use outdoors.
• Do not leave the unit unattended while plugged in. Unplug the electrical cord when not in use.
• Do not allow the steamer to be used as a toy. Close attention is necessary when being used near children, pets or plants.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are under supervision or have had instruction concerning use of the appliance by a person responsible for their safety.
• Young children should be supervised to ensure that they do not play with the steam cleaner.
• Never direct steam towards people, animals or plants.
• Do not immerse the unit in water or any other liquids.
• Do not use with a damaged cord or plug. If the unit is not working as it should, has been dropped, damaged, left outdoors or immersed in water, contact the kogan.com customer support team for information.
• Do not pull or carry the unit by the cord, use the cord as a handle, close a door on the cord or pull the cord around sharp edges or corners. Keep the cord away from heated surfaces.
• Never force the plug into a power outlet.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Unplug the cleaner after each use. To safely unplug, grasp the plug and gently pull. Do not unplug the unit by pulling on the cord itself.
• Do not handle the plug or unit with wet hands and do not operate the steam cleaner without wearing shoes.
• Please handle this product with care and inspect it regularly to ensure it is in good working order.
• If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.
• Do not insert any objects into the openings. Do not use with any opening blocked.
• Do not use without the floor cloth in place.
• Do not use without water in the water tank.
• Use extra caution when using on stairs.
• Store the unit indoors in a dry, cool location.
• Keep the working area well lit.
• Never put hot water or any other liquids such as aromatic, alcoholic or detergent products into the water tank. This will make the operation unsafe and will damage the unit.
• Always keep the output for the steam clear. Avoid placing the steam opening on soft surfaces which may block the flow of steam. Keep the openings free from lint, hair and other potential obstructions to ensure proper flow
• Use only as directed in this manual. The use of attachments not provided by Kogan.com with the unit may cause fire, electric shock or injury.
• The liquid or steam should not be directed towards equipment containing electrical components, such as the interior of microwave ovens.
• Do not expose the unit to rain.
• Stop uses if there is leakage of water.
• Do not use the unit in enclosed spaces that are filled with flammable, explosive or toxic vapour such as paint thinners, oil-based paints or certain moth-proofing substances.
• Do not use on leather, wax polished furniture or floors, unsealed hardwood or unsealed parquet floors, synthetic fabrics, velvet or other delicate steam-sensitive materials.
• Do not use for space heating purposes.
• Do not touch hot surfaces of the unit.
• Do not direct steams onto the power cord itself
• Do not place the unit on a near a hot gas or electrical burner or in a heated oven
• To disconnect the unit, turn the power switch to the ‘off’ position and then remove the plug from the outlet.
• Do not use the appliance for any purpose other than its intended use.
• Care should always be taken when using this appliance due to the emission of steam
• The protection system may shut off motor due to abnormal conditions(e.g improper assembly, overheating, etc.) If the motor appears dead but still warm, please set steam level to 0, turn OFF the motor, and unplug the power cord; wait until the product completely cools down (about 1 hour) before reuse
• Remember to remove limescale every 25 times you use a full tank of water or at least once a month, especially in areas with hard water. Please follow instructions provided in the Cleaning & Care section of this user guide. Use filtered or distilled water for better steam performance.

HOUSEHOLD USE ONLY! Commercial use of this unit voids the warranty.

COMPONENTS

OVERVIEW

ASSEMBLY

WARNING! Please make sure the unit is unplugged from an electrical outlet.

Attach the mop head to the main body as follows: insert the swivel joint into the designated hole in the main body and then use the screw to fix it into place. Make sure that the mop head is securely locked into place before use (Fig 1).

Insert the extension handle into the designated opening in the main body until it gets locked into place by the extension handle lock button (Fig 2).

Insert the power supply cord into the upper cord wrap as illustrated (Fig 3).

Place the microfiber cloth on the bottom of the mop head, making sure all of the loops on the cloth are aligned with the gripping hooks on the bottom of the mop head (Fig 4) Press the cloth against the mop head so the loops on the cloth catch onto the gripping strips on the mop head, holding the pieces together.

Note:Never use the carpet glider on surfaces that are prone to scratching.

Caution:Never assemble or remove the accessories while the unit is in operation.

Hand-Held Steamer

The hand-held steamer is an ideal portable cleaner. It is there for you to detach and use on work surfaces, kitchen countertops, sinks, bathrooms, windows, mirrors, tiles and spot cleaning on floor carpets and rugs. Use it with an attachment – Jet Nozzle or Nylon Brush to spray away dirt, grease, Mould and more.

Detaching the Hand-Held Steamer

Make sure the unit is unplugged from the power outlet.

Remove the power supply cord from the upper cord wrap and cord holder, then turn the lower cord wraps to release the cord and remove the power supply cord from its channel, as illustrated in Fig la & 1b.

Assembling the Hand-Held Steamer Accessories

Insert the designated end of the extension hose into the designated hole in the main unit, as shown in Fig la, lb and 1c.

Fig. 3 As illustrated in Fig la, make sure the extension hose is securely locked into place before use.

Strap Installation

Window Cleaning

Tool Loosen the drawstring on the coral cloth, then install the coral cloth onto the designated hooks on the window cleaning tool frame, then pull the drawstrings to secure the cloth in place.

Note:Do not cover the squeegee blade. Make sure to hook the coral cloth up to all of the hooks on the cleaning

Attach the window cleaning tool to the extension hose as follows. Align the lock button to the extension hose with the designated hole on the window cleaning tool frame. Push the extension hose into position until it locks into place (Fig. 3A & 3b).

Garment Steamer

Install the microfiber cloth to the garment steamer tool as shown in Fig 4a & 4b.

Attach the garment steaming tool to the extension hose as follows: align the lock button on the extension hose with the designated hole on the garment steaming tool frame, then push the extension hose into position until it locks into place as shown in Fig 5a.

Duster

Install the cleaning coral cloth onto the duster frame as shown in Fig 6a & 6b.

Attach the duster frame to the extension hose as follows: align the lock button on the extension hose with the designated hole on the duster tool frame and then push the extension hose into position until it locks into place as shown in Fig. 7a & 7b.

Nozzles

Straight Nozzle

To attach the straight nozzle, insert the straight nozzle into the designated hole in the extension hose as shown in Fig. 8a & 8b until it locks into place.

Round Brush & Bent Nozzle

To attach these accessories, screw them onto the straight nozzle that is connected to the extension hose as shown in Fig. 9a & 9b (round brush) or Fig. 10a & 10b (bent nozzle).

1. After assembling each accessory, add water to the tank up to the MAX level using the measuring cup.
2. Plug the steam cleaner into a power outlet.
3. Turn the knob on the water tank to the locked position, then you can turn on the power switch (from minimum to maximum) to choose the steam strength.

After Use

1. Unplug the power cord from the outlet.
2. Allow the mop pad to cool down and carefully remove cleaning cloth from the mop head, as the cleaning cloth could still be hot.
3. Any water remaining in the tank should be emptied before storage. Always empty the water tank at the end of each use.
4. Let any water (remaining as a product of condensation) drain from the steam opening before storing the appliance.
5. Wrap the power cord around the upper and lower cord wraps.
6. Wipe all surfaces of the unit clean with a soft cloth. Store in a protected, dry area.
7. Please store the unit in a cool, dry place when not in use. Do not leave it exposed to sunlight or rain.
8. Upright storage of the unit with a wet mop pad may result in the formation of white marks on your floor. To remove the white marks, clean the area with vinegar. Make sure to remove the mop pad before storage.

OPERATION

Using the Steam Mop

Please read before use:

• This unit is designed to thoroughly clean floor surfaces such as marble, ceramic, carpet, stone, linoleum, sealed hardwood floors and parquet. Not all floor types are suitable for steam cleaning.
• On surfaces that have been treated with wax, the wax may be removed by the heat and steam function. Does not use on unsealed flooring or let the unit stand on any wood or heat-sensitive floor for an extended period, as it may cause the wood grain to rise.
• When using on vinyl, linoleum or any other heat sensitive floors, use extra caution. Too much heat can melt down the glue in the flooring. When using the cleaner on laminated floors, the laminated floor should have been laid professionally and not have any gaps or cracks in which humidity could enter.
• Test the unit on a small isolated area of the floor before over-all use on any floor surface. Always check the use and care instructions of the flooring manufacturer before using the unit.
• If you are in any doubt, please consult with a specialist. Only use the carpet glider on carpeting and rugs. Use of the carpet glider on other floor surfaces will cause streaking and can scratch the surface.

1. Make sure the unit is unplugged and then fill the water tank with water.
2. Turn the water tank cap counter-clockwise to the open “OFF” position then remove the cap as shown in Fig la, 1b, 1c & Id.
3. Hold the mop at a 45° angle as shown in Fig Id and add water to the tank up to the MAX level by using the measuring cup. Do not overfill. The maximum tank capacity is 450ml.
4. Replace the water tank cap and turn clockwise approximately 90° to the “CLOSE” position until the cap is tightened securely.

CLEANING & CARE

Ensure That the Unit Is Disconnected from Power When Cleaning the UnitDrain the remaining water in the tank and then clean it after each use. Please use detergent to clean the accessories (jet nozzle and round brush) when they are dirty, then rinse them with clean water and allow them to air dry.

Decalcifying the Water Tank Interior

To clean the calcium deposits that build up inside the tank, add one or two tablespoons of white vinegar to a full water tank, close the water tank then shake the contents. Do not turnthe steamer on. Let it sit for a few hours. Then empty the tank and refill it with clean water.Close the tank and shake again. Continue flushing clean water through the tank until it rinses clear.

Removing Limescale

If the unit begins to produce steam more slowly than usual or stops producing steam entirely, you may need to remove lime scale. Lime scale can develop over time on metal parts, greatly affecting mop performance. It recommends you remove the lime scale regularly, up to once a month at least, especially in areas with hard water. The frequency of lime scale depends upon the hardness of the tap water and how often you use the steam mop.

1. Prepare a solution of 1/3 white vinegar and 2/3 tap water, then add to the water tank.
2. Secure and position the unit to ensure that steam released is aimed away from the floor or surrounding objects and surfaces. Plug the unit in and turn the unit ON by pressing the power switch. Allow the unit to produce steam until the vinegar/water solution is all used up.
3. Repeat the above procedure as necessary until a normal steam flow rate is achieved.
4. Fill the water tank with fresh water and allow it to rinse out.
5. Fill the water tank with fresh water, attach to the unit and release steam through the system until the water tank is empty. Remember to remove limescale every 25 times you use a full tank of water or at least once a month, especially in areas with hard water. Use filtered or distilled water for better steam performance.

TROUBLESHOOTING

Problem	Possible Cause	Possible Solution
Unit does not power up	Unit is not plugged in or turned on	Make sure the unit is plugged into a power outlet and switched on
Reduced steam or no steam	Water tank may be empty	Fill water tank
Blocked steam nozzle	Remove mop head and clean nozzle
Lime scale deposits	Follow the cleaning procedure to remove lime scale
Steam escapes from connections	Attachment is not connected properly	Turn the unit OFF, allow it to cool down, disconnect the accessories and then reattach them properly
Debris or obstructions at the connection points	Remove the accessory and check then clean the connection points
Cleaning cloth gets saturated and is too wet to use effectively	Cloth has received too much steam	Remove the wet cloth and replace it with a new cleaning cloth or allow the cloth to cool, then wring it out and reattach

Note: The protection system may shut off motor due to abnormal conditions (improper assembly, overheating, etc). If the motor appears dead but still warm, please set steam level to 0, turn OFF the motor, and unplug the power cord; wait until the product completely cools down (about 1 hour) before reuse.

Need more information?We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com