User GuideKOGAN SMARTERHOME™RGB LED OUTDOOR STRINGLIGHT(100 LED 10M)KAOTSSRGB1A
SAFETY & WARNINGS
- The LEDs cannot be replaced. Do not attempt to remove them from the string light.
- Do not expose the string light to direct heat or flame. Never immerse in water.
- Never cover the string lightly with any fabric or other form of cover that will reduce air circulation around the string light.
- Do not connect the string light to any other electrical device.
- Use the string light only with the transformer model number rated on the label.
- Do not connect the string light to the transformer while it is inside the package.
- Ensure to uncoil the string light before connecting to the transformer and before turning on the power supply.
- Ensure to inspect the string light for any faults prior to installation.
- Inspect string lights to ensure there are no cuts in the insulation. Ensure there are no exposed wires. If there is any damage, cease use immediately and contact Kogan.com
- Ensure the cable between the adaptor and the first LED of the string light does not present a tripping hazard when installed.
- If using a ladder to install, ensure that the ladder legs are positioned evenly on a firm surface.
- Use cable ties or other fixing items to secure the string light in position. Never use nails or other sharp fasteners to secure the string light in position.
- The string light should not be passed over any sharp objects that could wear through the string light’s insulation.
COMPONENTS
OVERVIEW
SETUP
- Uncoil the string light and connect it to the adaptor.
- Leave the string light exposed to the Sun for a short period before installation to make it more pliable and easier to the position.
- Arrange the string light as required. Connect the adaptor to a power supply and switch it on.
- The LEDs in the string light will be turned on.
CONNECT TO SMARTERHOME™ APP
Install AppDownload the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).RegisterIf you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS.To register:
- Tap to enter the registration page.
- The system automatically recognizes your country/area. You can also select your country code manually. Enter your email address and tap ‘Next.’
- Alternatively, you can select ‘Register by the mobile number’ and enter the verification code sent to you by SMS.
- Create a profile on the next page to define your location and room.
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode. This is indicated by the Wi-Fi indicator on the controller quickly flashing red.If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by long-pressing the Function Indicator button on the controller for 10 seconds until the Wi-Fi indicator quickly flashes red.Add device through the network
- Once registered, tap “+” in the upper right corner of the app’s home page to add a new device through the network.
- Select the product type from the list of options in the app (Lighting > Lighting).
- Ensure that the device is in pairing mode, with the Wi-Fi indicator quickly flashing red, and tap “Confirm indicator is quickly flashing”.
- Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until the connection is complete.
- After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.
Notes:
- The device and the app must use the same Wi-Fi network.
- The device is only compatible with 2.4Ghz networks.
OPERATION
After entering the control page of the device, you can tap the 
switch icon to turn on the string light.
Control Page Settings
When the light is switched on, the following options are displayed on the control page:
Modes Adjust the functions/modes of the string light. The modes are Steady, Wave, Fade, Flash, Sparkle, Twinkle, Chase, Jump, and Auto.Colour Change the string light color. You can change the string light color to Red, Green, Yellow, Blue, Purple, Cyan, White, or Multi.Timer Set the string light timer.
- Start time and End time: Program the string light to be on from start time to end time
- From Sunday to Monday: Program the string light to be on for the selected days of the week.
- Close or Open: To turn the timer on or off.
CONTROLLER
Function Indicator Button
- Press 1 time to change the function or mode of the string light.
- Long press for 10 seconds to reset the Wi-Fi connection.
Colour Indicator Button
- Press 1 time to change the color of the string light.
- Long press for 3 seconds to turn on or turn off the string light.
Note:You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device.Adding “SmarterHome” to the Google Home app
- From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page.
- Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’
- Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
- Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
- From here, you will be prompted to sign in to your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines.
- Tap on any of the devices to view a list of available commands.
Note:Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL
Note:You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device.
Adding “SmarterHome” to the Alexa app
- From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills & Games from the sidebar.
- Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ skill.
- Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
- From here, you will be prompted to sign in to your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
- Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account.
- When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Note: Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
TROUBLESHOOTING
| Problem | Possible Solution |
| The string light does not light up | Ensure the power supply is switched on. |
| Confirm the string light is correctly plugged into the transformer. | |
| Ensure the Wi-Fi indicator on the controller is illuminated. | |
| Ensure the Wi-Fi function is active on your cell phone. | |
| •Turn off the power supply and remove the transformer•Re-attach the transformer and connect it to a different power supply that is known to be working. | |
| If the string light still does not work:•Turn off the power supply and close the app.•Reset the device by turning on the power supply and reconnecting to the app.See the Connect to SmarterhomeTM App section of this user guide. |
SPECIFICATIONS
| LED | 100 PCS |
| Transformer Input | AC 220-240V – 50-60 Hz |
| Transformer Output | DC 24V, 8W |
| String Light Length | 10 meters |
| Water Resistance | IP44 Rated |
NOTES
Need more information?We hope that this user guide has given you the assistance needed for a simple setup.For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
report this ad
[xyz-ips snippet=”download-snippet”]