kogan KARVMWDNRCA Rear View Mirror with Dash and Reverse Camera
OVERVIEW
- GPS (optional)
- SD card slot
- Camera interface
- USB power
- Reset
- Speaker
- Lens
- Video
- Photo
- Setting
- Power off
- Playback
- Format
- Okay
- Main menu
- Power switch
- Previous
- Next
OPERATION
Basic Operation
Press the power button for 3 seconds to start up and press the power button again to shut down.Note:When the battery is low, the camera will prompt “low battery” and shut down automatically.
Video Recording
Press the recording button to start recording. The recording icon will appear on the top-left corner.
Photo Capture
Press the camera button to capture a single image.
Playback
Playback Mode
Short press the home icon to enter the menu and select playback. Use the arrow icons to select a file to replay and press the play icon to begin playback. Press the home icon again to return to the main menu.
Reversing Camera
Firstly, the car charger must be connected to the recording unit and the red power line of the rear camera must be internally wired to the reversing light indicator – this should be carried out by a qualified mechanic.When the reverse gear is engaged, the display will show the feed from the rear camera and switch off when the car is no longer in reverse.
Parking Monitoring
After connecting the supplied hardwire kit, the parking monitoring function can be enabled. If a vibration is detected while the camera is off (sensitivity can be set), the recorder will turn on and record automatically before switching off.
Motion Detect
After connecting the supplied hardwire kit, the motion detect function can be manually enabled. If movement is detected in the shooting area while the camera is on, the recorder begins recording automatically before switching off.
Charging the Battery
- Car charger
The charging time is approximately 180 minutes. The charging symbol will illuminate while charging and turn off automatically when charging is complete.
SPECIFICA TIONS
- File Format – M-JPEG
- Video Resolution – Maximum 1080p
- Video Format – AVI
- Frequency – 50Hz/60Hz
- Power Interface – 5V 1A
- Battery – Built-in
TROUBLESHOOTING
- Cannot recordEnsure there is free space and the SD card is not locked.
- Recording automatically stopsThis may be due to the high bandwidth requirements of HD video. Use a high-speed SD card compatible with SDHC.
- “File error” message upon playbackRecorded data is corrupt. Reformat the SD card.
- Footage is blurryEnsure lens is clean.
- Sky, water, etc. are very dark in captured footageScenes with large contrast will affect the camera’s automatic exposure function. Modify the “EV” value.
- Colors are incorrect on cloudy days or indoor lightingEnsure “White Balance” is set to automatic.
- Distortion with horizontal stripes on recorded footageChange from 60Hz to 50Hz or vice versa.
- Camera crashesShort press reset button to restart.
Need more information?We hope that this user guide has given youthe assistance needed for a simple set-up.For the most up-to-date guide for your product,as well as any additional assistance you may require,head online to help.kogan.com
[xyz-ips snippet=”download-snippet”]