kogan KAVACSTV10A Z10 Pro Cordless Stick Vacuum Cleaner
SAFETY & WARNINGS
WARNING: When using an electrical appliance, basic precautions should always be followed, including the following.Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
To reduce the risk of fire, electric shock, or injury:
- Do not vacuum any liquids.
- Do not immerse in water when cleaning.
- If handheld vacuum/wand is damaged, discontinue use.
General use
- To avoid fire, explosion, or injury, inspect the battery pack and chargers for any damage before use. Do not use with a damaged cord or plug. If the appliance has been dropped, damaged, left outdoors, dropped into water or is not working as it should, contact Kogan.com.
- Do not use outdoors or on wet surfaces. Use only on dry surfaces.
- Do not handle the charger (including charger plug and charger terminals) with wet hands.
- Do not leave the vacuum cleaner unattended while in use.
- Always turn off this appliance before connecting or disconnecting the floor nozzle.
- Do not incinerate the appliance, even if it is severely damaged, as the power pack may explode in a fire.
- Keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibres.
- Do not place vacuum cleaner on unstable surfaces such as chairs or tables.
- Keep your work area well lit.
- Do not put any objects into ventilation openings.
- Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
- Do not allow the appliance to be used as a toy. Close attention is necessary when used by or near children, pets, or plants.
- Do not use the appliance if the airflow is restricted; if the air paths or the floor nozzle become blocked, turn off the vacuum cleaner and remove the battery. Clear all obstructions before returning the battery to the vacuum and powering on again. Keep the floor nozzle away from hair, face, fingers, uncovered feet, or loose clothing.
- Store the appliance indoors. Do not use or store it below 4°C. Ensure the appliance is at room temperature before operating.
- Do not carry the appliance with your finger on the power button.
General cleaning
- Do not vacuum up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
- Do not vacuum up drywall dust, fireplace ash or embers. Do not use as an attachment to power tools for dust collection.
- Do not vacuum up smoking or burning objects such as hot coals, cigarette butts or matches.
- Do not vacuum up flammable or combustible materials, such as lighter fluid, gasoline or kerosene or use the vacuum in areas where they may be present.
- Do not vacuum up toxic solutions (e.g., chlorine bleach, ammonia or drain cleaner).
- Do not use in an enclosed space where vapours are present from paint, paint thinner, moth-proofing substances, flammable dust or other explosive or toxic materials.
- Do not vacuum up any liquids.
- Do not immerse the vacuum cleaner in water or other liquids.
- Use extra care when cleaning on stairs.
Dust cup/filters/accessories
- Do not use the appliance without the filter, dust cup and all filters in place. Make sure all accessories are in place after routine maintenance.
- Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Make sure that all filters are thoroughly dry, and all accessories are free of blockages after routine cleaning.
- Use only Kogan brand filters and accessories. Using other brands will void the warranty.
Battery pack
- Do not charge the appliance while it is powered on.
- Do not charge the power pack at temperatures below 10°C or above 38°C. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Do not expose the battery or appliance to fire or temperatures above 130°C as it may cause an explosion. Battery should not be stored at temperatures below 3°C or above 40°C to maintain long-term battery life.
- Use the battery charging dock on flat, stable surfaces only.
- Use the appliance only with specifically designated batteries and adapter. Use of any other battery packs or adapter may create a risk of injury and fire.
- Must use the original adapter to charge, otherwise, it may damage the machine.
- When the battery is not in use, keep it away from all metal objects, such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals together increases the risk of fire or burns. The battery should not be exposed to or submerged in any water, salt water or other liquids.
- Under abusive conditions, liquid may be ejected from the battery pack. Avoid contact with liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts eyes seek medical help.
- Do not modify or attempt to repair the appliance or the battery yourself; the appliance should only be serviced by a qualified repair person using only identical replacement parts.
OVERVIEW 
Note: The battery does not come fully charged. Before first use, charge the battery to full. During first use, discharge it completely to condition the battery.
| A | Battery pack with digital display screen |
| B | Main body |
| C | Dust cup |
| D | Wand |
| E | Direct-drive LED multi-purpose floor head |
| F | Crevice tool |
| G | Dusting brush |
| H | Wall-mounted dock with screws |
| I | Power adaptor |
| J | Upholstery tool |
ASSEMBLY
Assembling the main bodyAccessories will “click” into place when correctly assembled.
Installing and removing the battery pack 
Align with the guide-track groove and then install the battery pack until the “click” sound is heard.To remove the battery pack, press the release button and detach the battery pack.
Install the wall-mounted dock
INSTRUCTION
Charging the battery 
Charging with wall-mounted dock 
OPERATION
MIN POWER: For a small amount of dust cleaning.AUTO POWER: For everyday cleaning; automatically adjusts power to suit different cleaning scenarios and turns to boost mode when heavy dirt is detected.MAX POWER: Maximum power for heavy-duty cleaning (this power setting will drain the batteries faster than other settings).
CLEANING & CARE
WARNING: Hand wash filters with water alone to prevent damage from cleaning chemicals. Allow ALL filters to air-dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.CAUTION: Turn off the power and remove the power pack before servicing.IMPORTANT: Clean the dust screen inside the dust cup as required.
Note: Empty the dust cup when debris reaches the MAX fill line.
Emptying the dust cup 
To empty the dust cup, remove the handheld vacuum from the wand by pressing the wand release button and pulling up on the handheld vacuum. Position the dust cup over a bin, then open the bottom of the dust cup by pressing the dust cup release button on the side.
Cleaning the dust cup and filters
- To clean the dust cup, remove the dust cup from a handheld vacuum and rinse with water. Flush the dirt off as needed. Once dust cup is completely dry, return it to a handheld vacuum.
- To clean the filter, remove the filter from dust cup as illustration. Rinse with water. Once completely dry, reinsert the filter to the dust cup.
Maintaining the floor head
- Release the brush roller by sliding the release button; remove any string, hair or debris that may be wrapped around the brush roller/soft roller by running scissors along with the guide on the roller.
- Reinsert the brush roller to the floor head until the release button clicks into place.
- Wash the brush roller as needed, using only water. Air-dry completely for at least 24 hours before returning it to the brush roller enclosure.
WARNING: When cleaning the brush roller, be sure to not cut anything other than hair, string, fibres, or other debris loose from the roller.
Tip: Ensure the floor head is completely sealed and closed before using.
Checking for blockages: handheld vacuum, wand, and floor head 
- Turn off the vacuum and remove the battery.
- Remove the wand from the handheld vacuum and check all intake openings.
- Remove the floor head from the wand and check the wand for blockages.
Disposal
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
TROUBLESHOOTING
WARNING: To reduce the risk of shock and unintended operation, turn off the power and remove the battery before servicing.
| Problem | Possible cause | Remedies |
| The appliance does not operate | No power | Charge the battery according to the instructions. |
| AUTO protection for overheating. | Turn off the appliance, restart after cooling | |
| The suction mouth is blocked. | Check and remove blockages. | |
| HEPA cleaning indicator blinking | Dust cup and filters need cleaning. | Empty dust cup and clean filters. |
| Brush roller does not spin | Brush roll light flashes indicate floor head blockage. | Turn off the appliance and remove the blockage of floor head. |
| Roller auto protection for overheating. | Turn off the appliance, restart after cooling. | |
| Connection issue between the handheld vacuum, wand, and nozzle. | Disconnect and rub the junction point with a soft cloth, then reattach. | |
| Weak suction power | The pre-filter is not installed. | Install the pre-filter |
| The appliance is blocked (such as a tube or suction mouth) | Clear blockages and clean the brush roller | |
| Abnormal motor sounds | The appliance is blocked (such as a tube or suction mouth) | Clear blockages. |
| Battery will not charge | The adaptor is not correctly inserted. | Reinsert the adaptor correctly. |
| Poor contact of the main body or battery | Check if the main body and battery are correctly placed. | |
| Wrong charger being used | Use the original adaptor. | |
| Charging too slow | Temperatures outside of the specified range | Charge the battery when the temperature is above 10°C and below 38°C. |
SPECIFICATIONS
| Battery | 25.2V 2500mAh |
| Rated power | 350W |
| Dust cup capacity | 0.5L |
| Charging time | 4 hrs |
| Charging output | 30V |
| Operating time | 15-40 mins |
Note: The above data has been measured in a controlled environment; the actual performance of the product may vary according to the situation.
Need more information?We hope that this user guide has given youthe assistance needed for a simple set-up.For the most up-to-date guide for your product,as well as any additional assistance you may require, head online to help.kogan.com
[xyz-ips snippet=”download-snippet”]