kogan Smarterhome 1.7L Smart Glass Kettle User Guide

KOGAN SMARTERHOME™ 1.7L SMART GLASS KETTLE

SAFETY & WARNINGS

Thank you for buying this Kogan SmarterHome™ product. Please read all safety instructions before using this device.

Please handle this product with care and inspect it regularly to ensure it is in good working order.If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.

When using electrical appliances, basic safety precautions should always be taken, including the following:

  • Do not touch hot surfaces. Use handles or knobs.
  • Do not attempt to open the lid immediately after heating, as the metal surface will be hot.
  • To protect against fire, electric shock and injury to persons, do not immerse cord, plug, or power base unit in water or other liquids.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow cooling before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  • Do not use outdoors.
  • Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always fill the kettle first, then set the appliance onto the power base, and finally plug the cord into the outlet. To disconnect, remove the kettle from Power Base, then remove the plug from the wall outlet.
  • Do not use this appliance for other than intended use.
  • Always make sure that the lid is closed during operation. The kettle will not shut off when reaching maximum temperature with the lid open. Scalding may occur when the lid is open during operation.
  • Extreme caution must be used when moving the kettle containing hot water.
  • This appliance is not intended for use by persons (including children)with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • For household use only.
  • Never try to remove the lid.
  • When opening the lid, handle it gently and do not try to push it beyond its normal resistance. If you break the lid, the kettle will network properly.
  • Never fill the kettle with anything but water.
  • Never immerse the kettle in any liquid. Never put kettle or base in the dishwasher.

PRODUCT OVERVIEW

  1. Kettle mouth (with filter)
  2. Lid
  3. Lid open key
  4. Key panel
  5. Handle cover
  6. Glass body
  7. Handle
  8. Base

OPERATION

Read all important safeguards and operating instructions before using this kettle. Discard the first pot of boiled water to remove any dust and residues from the manufacturing process.

Standby mode

  • Place kettle on the power base.
  • Plug cord into wall outlet, and switch on.
  • and button indicator lights will be flashing, indicating that the unit is in standby mode. If no operation is commenced within 2 minutes, the kettle will go into sleep mode and the and indicator lights will turn off.

Boiling water

  • Remove kettle from base.
  • Open the lid until it stands vertically. Do not bend the lid further back than it is designed to.
  • Fill with the desired amount of fresh cold water. The kettle has minimum (MIN) and maximum (MAX) indicator markings.
  • Close the lid.
  • Place kettle on the power base.
  • Press the button; the blue LED light will turn on and boiling will commence.
  • Once the water reaches 100°C, the blue LED light will turn off, and the kettle will return to standby mode.

Keep warm mode

  • Press button and cycle through the following temperatures: 40°C, 50°C, 60°C, 80°C, 90°C. The LED screen will flash for 3 seconds and then lock in the temperature.
  • When the water temperature drops lower than the selected temperature, the kettle will reheat the water automatically.

Keep warm mode after water boiling

  • Press button and cycle through the following temperatures: 40°C, 50°C, 60°C, 80°C, 90°C; then press the button to begin boiling.
  • Once the water reaches 100°C, the blue LED light will turn off, and the kettle will display the current temperature. When the water reduces to the selected temperature, the kettle will reheat the water automatically.

Cancel boil

  • Hold down the button for 1 second to return to cancel heating.

Cancel keep warm

  • Press the button three times (x3) or hold down for 1 second to return to standby mode instead of keeping warm.

HELPFUL HINTS

  • Never try to boil water with the lid open.
  • Do not leave water standing in the kettle. Discard unused water.
  • If the kettle is set to boil without water, it will automatically turn off (the blue indicator light will turn off).
  • If you remove the kettle during heating, the blue indicator light will turn off and the heating will be cancelled.

SMARTERHOME™ CONNECTION

Download the Kogan SmarterHome™ app from the Play Store (Android) or App Store (iOS).Creating SmarterHome™ accountIf you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS.

To register:
  1. Tap to enter registration page.
  2. The system automatically recognises your country/area. You can also select your country code manually. Enter your email address and tap ‘Next.’
  3. Alternatively, you can select ‘Register by mobile number’ and enter the verification code sent to you by SMS.
  4. Create a profile on the next page to define your location and room.

NOTES:

  • The device and the app have to use the same Wi-Fi network.
  • The device is only compatible with 2.4Ghz networks.

Adding Device through Network
  1. Within the SmarterHome™ app, tap the ‘+’ icon in the upper right to add a new device through the network.
  2. Select the type of device you want to connect to. If you are unsure, or cannot find the appropriate category on this list, select ‘Auto Scan’.
  3. To connect with the app, your SmarterHome™ product needs to be in ‘pairing mode’. Hold down button for 5 seconds, or until the device beeps once. The indicator light in the top-left corner of the display will blink rapidly, showing that the kettle is in pairing mode.
  4. The app will prompt you to confirm this. If your device does not match the description of the pairing mode on the app screen, do not tap confirm.NOTES:
    • When powered on for the first time, many SmarterHome™ devices will start in pairing mode by default. If the device is matching the on-screen prompts (step 4), simply confirm this and continue.
    • If the device was powered on before downloading the app and registering your account, it may have timed out and exited the pairing mode. Simply turn the device off and on again to restart.
  5. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
  6. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
  7. After successfully being added, you will have the option to rename the kettle and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.

SMARTERHOME™ OPERATION

In-app functions

Within the control page, you can turn the kettle on or off to begin boiling (A), view the current temperature (B), access device options (C), adjust Keep Warm temperature (D), and open the Schedule menu (E).

Wake-up function and Scheduling

By tapping ‘Schedule’ on the control panel page, you will open the Add Schedule menu. Here you can arrange the exact date and time you would like the kettle to boil, either as a one-off task or a recurring activity.

NOTE:

  • You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device.
  • Please note that Google Home and Amazon Alexa can only control the base functions of this and other compatible devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
Adding “SmarterHome” to the Google Home app
  1. From the home page of the Google Home app, select the ‘+’ icon to access the ‘Add and manage’ page.
  2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’
  3. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
  4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
  5. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which you registered your account with.
  6. Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines.
  7. Tap on any of the devices to view a list of available commands.

TIP: Try saying “Hey Google, turn on kettle,” to begin boiling. Then try “Hey Google, turn off kettle,” to stop.

Amazon Alexa Control

NOTE: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device.

Adding “SmarterHome” to the Alexa app
  1. From the home page of the Alexa app, select the ‘ ’ icon and select ‘Skills & Games’ from the sidebar.
  2. Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ skill.
  3. To ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
  4. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which you registered your account with.
  5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
  6. Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account.
  7. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.

TIP: Try saying “Alexa, turn on kettle,” to begin boiling. Then try “Alexa, turn off kettle,” to stop.

CARE & MAINTENANCE

  • Always unplug power cord before cleaning.
  • Make sure kettle is cold before cleaning.
  • Clean the exterior surface with a clean, damp, soft cloth.
  • Never use abrasive cleaners or scouring agents.
  • Rinse out kettle and wipe dry with a soft, lint-free cloth.

Attention:

  • Over time, the stainless-steel surface of the heating element inside the bottom of the kettle may change colour slightly. This is caused by the intense heat of the heating element.
  • • If your water has a high iron content brownish stains may appear on the stainless steel element (this is also known as “boiler scale”). These stains can be wiped away with a cloth and a mild abrasive. Rinse kettle thoroughly with fresh water.
  • Hard water can leave calcium spots inside the kettle. Use a commercial descaling agent and follow the instructions that come with the agent.

Note: Make sure kettle is not hot.

TROUBLESHOOTING

Device won’t connect to Kogan SmarterHome™ app
  • If you have followed the steps from pages 7-10 but are unable to establish a connection with the device, select ‘Other Mode’ from the top right corner instead of confirming pairing mode.
  • Select ‘AP Mode’ from the list, and hold down button for 5 seconds, or until the device beeps twice. The indicator light will now flash slowly.
  • Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection.
Lid won’t open / is stuck
  • Do not attempt to open the lid immediately after heating, as the metal surface will be hot.
  • If stuck, the lid can be opened by pressing the button in and pulling up on the surrounding metal surface.
Kettle leaks water
  • Do not fill the kettle above the “MAX” indicator (maximum water).
  • If leaking, immediately cease use and disconnect from power.

Need more information?This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up.For the most up-to-date guide for your product, as well as any additional assistance you may require,head online to help.kogan.co

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,