Kogan Washable Plush Electric Throw Blanket User Guide

USER GUIDE

WASHABLE PLUSH ELECTRIC THROW BLANKETOVELTHRLGRA, OVELTHRLNAA, OVELTHRLSLA, OVELTHRWGRA, OVELTHRWNAA, OVELTHRWSLA, OVELTHRWTEA & OVELTHRWWIA

SAFETY & WARNINGS

• Read the instructions carefully before first use.
• The electric throw blanket should be examined frequently for signs of wear, either of the electric throw blanket, controller, or flexible cord.
• If the electric throw blanket or its power cord is damaged, unplug and stop using it immediately, and then contact Kogan.com.
• Check that your electric throw blanket is not damaged before switching it on.
• Always unfold or unroll before switching on. o Failure to observe these instructions will result in overheating. This will activate the overheat safeguard system, thus leaving the electric throw blanket inoperative. o Misuse of this electric throw blanket will invalidate your warranty.
• When storing the electric throw blanket, allow it to cool down before folding it. Fold neatly but not tightly (or rolled) without sharp bends in the heating elements and store where no other heavy objects will be placed upon it.
• The electric throw blanket should not be used on an adjustable bed. However, if the electric throw blanket is used on an adjustable bed, check that the electric throw blanket and cord do not become trapped or rucked, for example, in hinges.
• The electric throw blanket is not to be used by very young children (0-3 years).
• The electric throw blanket is not to be used by young children over the age of three unless the controls have been pre-set by a parent or guardian or unless the child has been adequately instructed on how to operate the controls safely.
• This electric throw blanket is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• This electric throw blanket must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating.
• It is recommended that persons with artificial pacemakers should check with their doctor and the manufacturer of the pacemaker before using this electric throw blanket.
• electric throw blankets are intended for human use only. Not for animals and pets.
• Do not allow pets or animals to lie or chew on this product or on the electrical cords etc. Prolonged application at the highest heat setting can result in skin burns.
• Keep the control away from open windows.
• Keep the controller/s away from external heat sources, i.e. a heater, fireplace, etc.
• Do not use pins as these may damage the electrical wiring.
• The flexible supply cord and switch must, as far as practicable, be kept outside of the electric throw blanket. Do Not Cover the Controller.
• Do not switch the power on if the electric throw blanket is wet or in a folded state.
• Switch off and unplug from power when the electric throw blanket is not in use.
• Do not leave heavy objects on the bed, e.g. folded electric throw blankets, suitcases, etc. when the electric throw blanket is switched on as this will trigger the over-temperature device and render the electric throw blanket PERMANENTLY inoperable. This may also invalidate the warranty.
• Do not dry-clean this electric throw blanket. The cleaning liquid may have a damaging effect on the insulation covering of the heating element. Follow washing directions located on the electric throw blanket’s rating label and in this guide.
• This electric throw blanket is not to be used continuously.
• This electric throw blanket is not to be used in Bed or while Asleep.
• The electric throw blanket must not be used over or under a water bed.
• Depending on the controller type, you may notice a blue flash in the switch when moving from one setting to another. This is NOT dangerous and is caused by the copper parts making contact.
• This electric throw blanket is for domestic use only. It is not intended for use in hospitals or the like.
• Only use the controllers supplied with this electric throw blanket.
• For additional protection, it is strongly recommended that the use of a residual current device (ROD) with a tripping current not exceeding 30mA be used on the circuit supplying this product. If you are unsure if your home has this device, please contact your nearest Electrical Contractor.
• Always treat Electrical Appliances with the utmost care. Do not use this product in any other fashion or for any other purpose other than stated in these instructions.

Overheat Protection

• The electric throw blanket is fitted with numerous overheat safeguard systems. This offers protection against overheating or damage to the elements by disengaging the power to the elements before overheating hazards occur.
• Should there ever be a problem with the heating element in the electric throw blanket, it will automatically close down the operation and the electric throw blanket will turn off.
• The controller must not be covered. The controller has built-in protection so that if the controller overheats or the heating element is damaged, it will automatically close down the operation permanently.

SETTING UP

Connecting the Controller

• Turn off the power and remove the plug from the power source
• To fit the controller plug, simply hold the socket with one hand and push the controller plug all the way until it is firmly in place.
• To remove the controller, lift the locking tab up with your finger and pull the plug directly out. Do not pull the controller cable and do not try and pull the controller plug out without lifting the locking tab as you will damage the socket.
• Do not fold, roll or kink the cable. Allow the cable to hang freely.
• Ensure the cable is not pulled tight so that it bends hard at the electric throw blanket connector end.

Ensure the electric throw blanket is the appropriate size for the bed. The top must not hang over the edges of the mattress.

OPERATION

Using Your electric throw blanket

• Read the Safety and Warnings section and set up as outlined in Assembly. Once you have ensured the electric throw blanket is not folded or creased and the controller plug is fitted securely, plug it in and switch it on, keeping the controller away from external heat sources, such as heaters, fireplaces, etc.
• Wrap the electric throw blanket around your body or drape it over your legs. The electric throw blanket MUST NOT be used under a blanket (as with an ordinary electric blanket.
• When wrapping the throw around your body and shoulders, ensure that the controller connection is at the bottom and facing on the outside for comfort.
• If using in conjunction with another normal blanket, place the electric throw blanket on top of the other blanket. The electric throw blanket must always be positioned on the outside to prevent overheating.Important:Do not cover the controllers at any time.The Heated Throw must not be used in bed or while sleeping. Turn off and unplug while not in use.Store it in a dry place when finished.

Using the Controller

Use your electric throw blanket with Detachable Controller only.

Turn controller to the “ON” position on the right-hand side. It will enter standby and display 0 for time and temperature. Use the Temp and Time buttons to set the temperature and time, or press High to preheat. If preheating, the display will show H, which will switch to L after one hour.

Auto-OffThe controller can be programmed with a 1-9 hour automatic shutoff timer.Electrical Field-EffectWhen using the electric throw blanket, some people may be susceptible to a tingling sensation when alone or when touching someone else using the electric throw blanket. This sensation is caused by the current flowing through the element, creating an Electromagnetic Field (EMF), and is common among similar products. Some people are more susceptible to feeling this tingling sensation than others. This is no cause for concern and is in no way an electric shock.

CLEANING & CARE

Ensure all controllers are unplugged from the PowerPoint and from the electric throw blanket before cleaning.DRIP DRY ONLY: DO NOT WRING OR TUMBLE DRY OR DRY CLEAN.

• Do only clean this Throw as specified in the instruction book.
• Do have this throw repaired and/or tested by an authorized electrician.
• Do turn off and unplug when not in use.
• Do not use if folded, rucked, bunched up, or creased.
• Do not use if wet.
• Do not insert needles or pins into the throw.
• Do not use with damaged elements or cables.
• Warm machine wash separately with a maximum temperature of 40°C on a mildcycle.
• Do not bleach.
• Do not tumble dry.
• Line dry in the shade when excess water has been removed.
• Do not peg wired parts.
• Do not iron.

Note: Never use hot water as the electric throw blanket may shrink and will void your warranty.Spot Cleaning

• The area affected should be sponged gently using a natural wool detergent or mild soap flakes dissolved in cold water, followed by multiple spongings using clean, soap-free cold water.
• Lightly compress the treated area between two towels to absorb excess water.
• Refer to the section “Drying” for drying instructions.
• The connections to the electric throw blanket must be kept free of moisture.

Hand Washing (Recommended)

• After removing the controller, place the electric throw blanket in cold water (bathtub or large laundry tub is ideal) mixed with either a natural wool detergent or with mild soap flakes.
• Soak the electric throw blanket for approximately five minutes and then gently squeeze the soapy water through the electric throw blanket.
• Rinse the electric throw blanket thoroughly with clean lukewarm water until no more suds are visible and allow water to drain off the electric throw blanket.
• Refer to the section “Drying” for drying instructions.With normal use, it is recommended that you hand wash your electric throw blanket once a year.Machine Washing
• Remove the controller and place the electric throw blanket in the washing machine with either a natural wool detergent or mild soap flakes.
• Set your machine to the Delicate Wool or Gentle cycle (without Spin Dry) and set the water temperature to cold.
• When the cycle has finished, allow water to drain off the Throw. Gentle squeezing to remove excess water may be applied or Drip Dry.
• Refer to the section “Drying” for drying instructions.Drying
• Spread the electric throw blanket out on a clean surface (e.g. a large table) to dry in a shady area.
• Your electric throw blanket can also be dried on a clothesline, provided the majority of the water has been drained off, the electric throw blanket is not creased or folded and as long as pegs are not used on the element areas of the electric throw blanket, i.e. hang from the edge of the Throw only.Note: The electric throw blanket must be thoroughly dried (including controller socket) before using.

StorageWhen storing the electric throw blanket, allow it to cool down before folding. Fold or roll neatly but not tightly and without sharp bends in the heating elements and store where no other heavy objects will be placed upon it.Store in a dry place where it cannot be damaged.

TROUBLESHOOTING

Error codes:P: Display of `P’ indicates an electrical fault. Verify the controller has been connected firmly restart it. If the fault persists, it means the internal connection is faulty: contact Kogan.comE: Display of `E’ indicates an internal short circuit and damage: contact Kogan.com

NOTES

Need more information?We hope that this user guide has given you the assistance needed for a simple setup. For the most up-to-date guide for your product, as well as any additional assistance you may require,head online to help.kogan.com