Balcony SunshadeInstallation and operating instructionsBW92001
Instruction manual
SPECIFICATIONS
Product name | Material and surface treatment | Suitable wall | Suitable weather |
BW92001 W x HmW: Product widthH: Length of stretchers (Please refer to the specifications on the packaging) | Material Steel Tubes/ aluminum/plasticPolyester Surface treatmentTubes: powder coatingFabric: waterproofing | Concrete Brick Solid wood | This product isIt is recommended for use at wind forces below 5.Do not use in heavy rain. |
Precautions and safety instructions for installation and operation
Attention!Before opening the balcony sunshade, make sure that all fixing bolts have been properly installed and tightened. Always close the balcony sunshade on windy days, or when it is not in use.Failure to observe these instructions may lead to material and structural damage to the balcony sunshade. Before opening and closing the balcony sunshade, please make sure you have removed the plug pin.Explanation of symbols:Avoid!
ACCESSORIES AND REQUIRED TOOLS
Please prepare the following tools before installation: |
INSTALLATION
Choose the place where you would like to install the product.Caution: The provided expansion bolts are intended for brick and concrete walls. To install the balcony sunshade on other materials, please use suitable bolts and make sure the wall is strong enough to support the product.
1. Installation dimensions:H = height of the balcony sunshadeW = width of the balcony sunshadeMONTAGE2. Mark the holes for drilling and install the balcony sunshade.
Hammer the expansion tubes into the holes with a mallet, then secure the wall bracket with the bolts.
Operating instructions
Service
Name | Balcony Sunshade |
No. | |
Type | BW92001 |
[xyz-ips snippet=”download-snippet”]