INSTALLATION MANUAL
Kore Workstation StainlessSteel Farmhouse Kitchen Sinks
KWF210-30, KWF210-33, KWF210-36KWF410-30, KWF410-33, KWF410-36
Please contact our Customer Service Team1-800-775-0703 / Have the model number available and retain a copy of your receipt with purchase date forreference.If for any reason this product does not meet your expectations, please be sure to repack thisproduct in the original box and packaging material to avoid damage during transit.
Prior to Installation:
- Inspect the sink prior to installation to make sure the sink has not been damaged duringshipping
- Use the cut-out template provided by Kraus
- Observe all plumbing and building codes according to your state requirement
- Additional floor and wall preparation may be required to avoid damaging the product
- Make sure to purchase the correct cabinet for your farmhouse sink. Farmhouse basecabinets should be 3″ larger than the actual size of the sink
- Not recommended to be installed with laminate countertop
For technical assistance or replacement parts, please contact Kraus Customer Serviceand one of our representatives will be happy to help:Toll-Free: 800-775-0703 or
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Shouldthere be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring alicensed professional.
Tools you will need:
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks withcountertop materials other than wood, marble or granite.
Parts List
KWF210-30
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-30
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BLCutting Board KCB-WS103BB
KWF410-30
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-30
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BL
- Cutting Board KCB-WS103BB
KWF210-33
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-33
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BL
- Cutting Board KCB-WS103BB
KWF410-33
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-33
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BL
- Cutting Board KCB-WS103BB
KWF210-36
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-36
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BL
- Cutting Board KCB-WS103BB
KWF410-36
- Cut-Out Template
- Mounting Hardware
- Bottom Grid KBG-UN1-36
- Strainer ST-1
- Drain Cap STC-2
- Rolling Mat KRM-11BL
- Cutting Board KCB-WS103B
Dimensions:
Model #: KWF210-30Sink Dimensions: 29 7/8” x 20 1/4” x 10”Min Cabinet Size: 33”
Model #: KWF210-33Sink Dimensions: 32 7/8” x 20 1/4” x 10”Min Cabinet Size: 36”
Model #: KWF210-36Sink Dimensions: 35 7/8” x 20 1/4” x 10”Min Cabinet Size: 39”
Dimensions:
Model #: KWF410-30Sink Dimensions: 29 7/8” x 20 1/4” x 10”Min Cabinet Size: 33”
Model #: KWF410-33Sink Dimensions: 32 7/8” x 20 1/4” x 10”Min Cabinet Size: 36”
Model #: KWF410-36Sink Dimensions: 35 7/8” x 20 1/4” x 10”Min Cabinet Size: 39”
Step 1. Determine Reveal Type
- Use scissors to cut along the line of the paper template for your desired reveal type(Negative, Positive, or Flushed Reveal)
Step 2. Position Template
- Check the cut-out template against the actual sink to ensure a proper sized cut-out.
- Place the cut-out template in the desired location on the countertop.
NOTE: Make sure clearance is suitablefor backsplash, faucet and plumbingfor the sink.
Step 4. Cut Countertop
- Cut the opening in the countertop by carefully following the traced line.
NOTE: Please use the appropriate sawthat best fits your countertop material.
Step 5. Cut Cabinet Front
- Measure height of apron front. Add 1/16″ to the dimension when you mark base cabinet front cutout. Use jigsaw tocut.
Step 6. Set Up Mounting Brackets
- Turn countertop over and align sink with countertop. Decide location for mounting brackets.
- Mounting holes should be 1/2″ from edge of sink.
Step 7. Drill Hole in Countertop
- Drill 3/8″ diameter x 1/2″ deep hole in the countertop.
Step 8. Install Anchors
- Insert anchors into drilled holes and lightly tap with a hammer until flush.
Step 9. Secure Sink to Countertop
- Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutoutin the countertop. Place sink over cutout hole and press firmly.
Step 10. Attach Mounting Hardware
- Attach mounting hardware to secure bowl. Remove excess sealant from inside lip.
- Allow sealant to set for 30 – 60 minutes.
NOTE: Use acetone or rubbing alcohol to remove any excess sealant.
Step 11. Install Plumbing Fixtures
- Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’sinstructions.
- Run water into sink and check for leaks.
Codes/Standards Applicable
Kitchen Sink WarrantyKraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. Thewarranty is non-transferable.Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage forthe lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from anauthorized Kraus dealer, through the lifetime of the original owner or end-user.Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replacedwith a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferableto a subsequent owner.
RestrictionsThis warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets,unauthorized dealers, and/or sold on clearance.This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water ormineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of theproduct, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such aspowders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage andwear down the finish.This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Krausand all applicable rules, regulations, and legislation pertaining to such installations.This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists thatsuch professionals have experience in the installation of bathroom and kitchen manufactured goods.This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allowrecovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, andKraus accepts no liability for such damages.This warranty does not cover Marine or Outdoor Installation.This warranty does not cover any free gifts included with purchase.Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability andfitness for a particular purpose, or compliance with any code.Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shippingcharges may apply). International shipping fees are not included.
COMMERCIAL WARRANTYKraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, andbusiness use.All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given,including but not limited to any implied warranty of merchantability or fitness for a particular purpose.Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long animplied warranty lasts, so the above limitations or exclusions may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to datecomprehensive warranty, go to www.kraususa.com/warranty
If you are a homeowner please contact a Kraus Customer Service Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050Toll-free 800-775-0703If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8955If you are an Authorized Partner please contact a Partner Support Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8954
In requesting warranty service, please be ready to provide:
- Proof of purchase.
- A description of the problem.
Download the Kraus Care & Maintenance Guide at:http://www.kraususa.com/maintenance
IMPORTANT
Register Your Kraus ProductActivate Your WarrantyAccess Premium Customer SupportGet Product Information
Read More About This Manual & Download PDF:
Kore Workstation Stainless Steel Farmhouse Kitchen Sinks KWF210-30 User Manual – Kore Workstation Stainless Steel Farmhouse Kitchen Sinks KWF210-30 User Manual –