Kraus Allyn Transitional Bridge Kitchen Faucet KPF-3121 Installation Guide

Table of Contents

INSTALLATION MANUAL

Allyn™ Transitional BridgeKitchen Faucet with Pull Down

KPF-3121

Congratulations on the purchase of your new Kraus plumbing fixture!Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

Please contact our Customer Service Team 1-800-775-0703 / [email protected]

Have the model number available and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
Flush angle stops to release any debris prior to installation.
Pre-drilled hole size requirement: 1 1/4″ (min) – 1 1/2″ (max)
Max countertop thickness: 2 1/2”
3 hole installation

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:Toll-Free: 800-775-0703 or [email protected]

Tools Required

Diagram and Parts List

Faucet Body
Rubber & Metal Washer
Mounting Nut & Screws
Weight

Faucet Installation Procedure

Installer Tip:

Shut off main water supply before installing new faucet.

Step 1. Install faucet and secure mounting hardware

Secure the faucet body with the rubber and metal washers (2) and the mounting nuts and screws (3). Do not overtighten.

Step 2. Attach spray hose and weight

Connect spray hose to quick connector attached to supply line. Install weight (4) on lowest vertical point on spray hose. White line on the spray hose should be in the center of the weight.

Step 3. Connect Waterlines

Connect waterlines to angle stops. Tighten with a wrench until snug. Turn on hot and cold angle stops and check for leaks.

NOTE: Please make sure filter washers are installed before connecting to the main valve.

Step 4. Flush spray hose

Remove spray head from spray hose. Hold tip of spray hose. Turn faucet on and let the water run for 60 seconds to flush any debris.

NOTE: Please make sure washer is installed attaching spray head to hose.

Replacement Parts

Replacement Parts List	Finish/Color	Part #
1. Spray Head	SFS, MB, BG*	KP44010
2. Check Valve	KP44011
3. Washer	KP44012
4. Spray Hose	SFS, MB, BG*	KP44013
5. Spout Washers	KP44014
6. Metal Handle	SFS, MB, BG*	KP44001
7. Lever Button	SFS, MB, BG*	KP44002
8. Cartridge Cover	SFS, MB, BG*	KP44003
9. Cartridge Hot	KP44004-H
10. Cartridge Cold	KP44004-C
11. Base 0-Ring	KP44005
12. Rubber Washer	KP44006
13. Metal Washer	KP44007
14. Mounting Nut	KP44008
15. Mounting Screws	KP44009
16. Protective Sleeve 17. 1.8 GPM Flow Restrictor	YW*	KP44015
KP4401 6
18. Waterflow Adapter	KP44018
19. Washer	KP44019
20. Quick Connector	KP44020
21. EZ-Weight	KP44021
22. Filter Washers	KP44022

*Denotes faucet component color options:SFS – Spot Free Stainless SteelMB – Matte BlackBG – Brushed GoldYW – Yellow

Trouble-Shooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM	CAUSE	ACTION
Leakage under faucet handle	Locking nut has come loose or cartridge needs to be reseated.	Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench.
Water does not shut off completely	Cartridge may need to be adjusted or replaced.	Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Unscrew locking nut with an adjustable wrench. Remove ceramic disc cartridge. Check for cracks, and if 0-ring is seated correctly. Reseat cartridge.
Leaking between spray head and the hose	Spray head may be loose or washer is not seated correctly in the hose connection.	Tighten spray head by hand until snug. Make sure washer is seated correctly.
Hose does not retract	Weight may be installed incorrectly.	Readjust weight on hose.
Low flow	Aerator may be cloggedThe screen filter in the hose connectors is dirty.	Unscrew aerator with aerator key. Hold tip of spray head and turn on water to flush debris. Turn off the water supply at water valve and unscrew the hose connectors from water supply lines. Clean the screen in the water lines with hot water, removing any debris or calcium build up.

Care & Maintenance

* To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth
Do not clean with soaps, acid, polish, abrasives or harsh cleaners
Do not use cloth with a coarse surface
Unscrew the aerator and clean when necessary* This installation manual is subject to change without further notice.

Codes/Standards Applicable:

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).

Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or otherconsequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

If you are a homeowner please contact a Kraus Customer Service Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050Toll-free 800-775-0703[email protected]If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8955[email protected]If you are an Authorized Partner please contact a Partner Support Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8954[email protected]In requesting warranty service, please be ready to provide:1. Proof of purchase.2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus ProductActivate Your WarrantyAccess Premium Customer SupportGet Product Information

www.kraususa.com

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-23

Kraus

admin

Tags:

Allyn, KPF-3121, Kraus, Pull Down, Transitional Bridge Kitchen Faucet