Kraus Oren Single Handle Kitchen Faucet KPF-2252 Installation Guide

Table of Contents

Congratulations on the purchase of your new Kraus plumbing fixture!Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

DO NOT RETURN TO THE STOREPlease contact our Customer Service Team at 1-800-775-0703 /

Have the model number available and retain a copy of your receipt with the purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation:

Make sure you have all the necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built-up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
Flush angle stops to release any debris prior to installation.
Pre-drilled hole size requirement: 1 3/8″ (min) – 1 1/2″ (max)
Max countertop thickness: 1 3/8″
1, 2 or 3 hole installation

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or [email protected]

Tools Required

Diagram and Parts List

Spray Head
Faucet Body
Mounting HardwareA. Rubber & Metal WasherB. Mounting NutC. Mounting Screws
Quick Connector
Hot & Cold Waterlines
Spray hose
Weight
Hex Wrench

Faucet Dimensions

Installer Tip:

Shut off the main water supply before installing a new faucet.

Step 1A. Faucet installation – with deck plate

For three-hole installation: a Deck plate, base plate (see below), and silicone sealant (optional) are required.Note: optional deck plate not included

Step 1B. Faucet installation – without deck plateFor single-hole installation: Deck plate, base plate and silicone sealant are NOT required.

Step 2. Install faucet and mounting hardwareInsert faucet body (2) into hole in countertop or deck plate assembly. Install mounting hardware (3A, B &C) from underneath the countertop.

Step 3. Secure mounting hardwareAdjust the direction of the faucet body (2) so that the faucet is facing straight. Tighten mounting nut (3B) until snug. Tighten mounting screws (3C) to nut with a Phillips screwdriver until snug.

Step 4. Attach spray hose and counterweightConnect spray hose (6) to quick connector (4) attached to supply line. Install weight (7) on lowest vertical point on spray hose (6).

Step 5. Connect waterlinesConnect waterlines (5) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks.NOTE: Please make sure filter washers are installed before connecting to the main valve.

Step 6. Flush spray hoseRemove spray head (1) from spray hose (6). Hold the tip of spray hose (6). Turn the faucet on and let the water run for 60 seconds to flush any debris.

Step 7. Check for leaksCheck for leaks at the connections. Retighten if necessary.

Replacement Parts

*Denotes faucet component color options:SFS – Spot Free Stainless SteelMB – Matte BlackCH – Chrome

Replacement Parts List	Finish/Color	Part #
1. Metal Handle	CH,SFS,MB*	KP06002
2. Set Screw	KP06055
3. Handle Button	CH,SFS,MB*	KP06030
4. Cartridge Cover	CH,SFS,MB*	KP06020
5. Locking Nut	KP06018
6. Cartridge	KP06100
7. Spray Hose	CH,SFS,MIr	KP06097
8. Hose Guide	KP06045
9. Spray Head	CH,SFS,ME•	KP06090
10. Check Valve	KP06104
11. Quick Connector	KP06108
12. Rubber Washer	KP06041
13. Metal Washer	KP06028
14. Mounting Nut	KP06067
15. Mounting Screws	KP06068
16. Protective Sleeve	KP06057
17. Hot & Cold Waterlines	KP06095
18. Weight	KP06015
19. Hex Wrench	KP06050
20. Mounting Hardware Kit (includes KP06041, KP06028, KP06067, KP06068)	KP06200
21. Filter Washers	KP06185

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM	CAUSE	ACTION
Leakage under faucet handle	The locking nut has come loose or the cartridge needs to be reseated.	Remove button located at top of the handle. Loosen the set screw with a hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench.
Water does not shut off completely	The cartridge may need to be adjusted or replaced.	Remove button located at top of the handle. Loosen the set screw with a hex wrench. Remove handle and unscrew cartridge cover by hand. Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge. Check for cracks, and if the O-ring is seated correctly. Reseat cartridge.
Leaking between the spray head and the hose	The spray head may be loose or the washer is not seated correctly in the hose connection.	Tighten spray head by hand until snug. Make sure the washer is seated correctly.
The hose does not retract	Weight may be installedincorrectly.	Readjust weight on the hose.
Low flow	The aerator may be clogged	Unscrew the aerator with the aerator key. Hold the tip of the spray head and turn on the water to flush debris.

Care & Maintenance

To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth
Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
Do not use a cloth with a coarse surface
Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Maintenance – Cartridge Replacement

Step 1: Remove the button located at the top of the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew the cartridge cover by hand.
Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge.
Step 3: Place the new cartridge in the handle seat. Secure the cartridge with the locking nut and assemble the handle.

Codes/Standards Applicable:

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.Kraus warrants the mechanical components such as but not limited to sprayed assembly (includes engine, aerators, structure, restrictors, backflow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicone and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.RESTRICTIONSThis warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recoveries of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.This warranty does not cover Marine or Outdoor Installation.Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code.Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warrantyIf you are a homeowner please contact a Kraus Customer Service Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050Toll-free 800-775-0703[email protected]If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8955[email protected]If you are an Authorized Partner please contact a Partner Support Representative at:Kraus USA, Inc.12 Harbor Park DrivePort Washington, NY 11050516-801-8954[email protected]In requesting warranty service, please be ready to provide: