Cable Set Side Assist
Installation Instructions Side Assistv1.1 (14.06.2022)
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
1
Contents
1 Liability Exclusion
3
2 Copyright
4
3 General notes
4
4 Safety Instructions
5
5 Requirements for the intended use
5
6 How to connect a cable to another
6
7 Note Cable Inscription/Color
7
8 Assembly Instructions
8
9 Assembly Note
9
10 Disassembly rear lights
10
11 Disassembly trunk covering passenger’s side
11
12 Disassembly rear bumper
12
13 Disassembly covering passenger’s side
15
14 Disassembly covering driver’s side front
16
15 Disassembly door covering
18
16 Disassembly loudspeaker
19
17 Disassembly mirror
20
18 Assembly sensors
21
19 Cable routing back to front
22
20 Cable routing passenger’s side to driver’s side
23
21 Cable connection door coupling plug interior
24
22 Connection CAN High + Can Low / power supply
25
23 Modification mirror
27
24 Cable routing door
29
25 Coding with Coding Interface
30
26 Coding Interface
30
27 Note Calibration
30
28 Bus rest
31
29 Important Note Side Assist
31
30 Assembling the vehicle
31
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
2
7 Note Cable Inscription/ColorFigure 2: Cable Inscription If the cable set consists of colored cables, connect the cables according to the color. If all cables of the cable set have the same color, connect the cables according to the cable inscription.
Kufatec GmbH & Co. KG – Dahlienstr. 15 – 23795 Bad Segeberg – e-mail: info@kufatec.de
8
[xyz-ips snippet=”download-snippet”]