LAMAX Blaze2 User Manual

Table of Contents

LAMAX Blaze2 User Manual

Controls

On	Hold for 2 seconds
Off	Hold for 2 seconds
Pairing	Hold for 4 seconds
Play / Pause	Press
Next / Previous Track	Hold / hold
VOL + / VOL –	Press / press
Answer / End Call	Press
Reject Call	Hold for 3 seconds
Redial the last call	Press twice
Activate Mobile Assistant	Press three times

Turning On

Press for 2 seconds to turn on the headphones. This is accompanied by an audible notification and the blue LED lights up.

Pairing

To enter the pairing mode, hold the button for 4 seconds. This is indicated by the LED alternately flashing red and blue.
On your device, turn Bluetooth on and locate and select LAMAX Blaze2 in the list of available Bluetooth devices. After successfully pairing, there is an audible notification.

If you have trouble pairing, remove your headphones from the list of paired devices in your smartphone. Turn off the headphones and then hold the button for 4 seconds. The headphones turn on and automatically go into pairing mode. Pair the headphones again as in Step 2 above.

Turning Off

Press and hold the for 2 seconds to turn off the headphones.

Charging

To charge, connect the micro USB cable to the headphones and the other end to the 5V USB charger. The LED lights up red when charging and will turn off when fully charged.