LAMAX Fitness Tracker
Operating Instructions
- Continuous heart rate measurement
- Automatic sleep monitoring
- GPS connection
- Weather forecast
- Notifications and phone pairing
Charging and replacing the strap
Remove the body from the strap as illustrated below. Charge the fitness tracker before using it for the first time. Plug it into the USB charger or a USB port on your computer. The charging status is displayed on the touch screen. It takes about 1 hour for the battery to be fully charged.
Controls
Control the tracker by moving your wrist or by touch. Rotate your wrist to the horizontal position to activate the display where the exact time will be displayed. Enable or disable this function in the mobile app.
Touch the display to control the following actions:
Band functions:
- Time
- Date
- Weather
- Sleep monitor
- Find your phone
- Lost phone alert
- Pedometer
- Calories burnt
- Heart rate
- Camera remote
- Music remote
- Inactivity alert
- Breathing exercises
- Alarm clock
- Stopwatch
- Do not disturb
- Display caller
- View incoming message
Installing the mobile app and pairing the band
Fitness band is compatible iOS (8.0 and higher) and Android (4.4 and higher). Download the mobile app to control the band from the link:
https://www.lamax-electronics.com/download/bfit-pro2/app
https://www.lamax-electronics.com/download/bfit-pro2/app
https://www.lamax-electronics.com/download/bfit-pro2/app
Physical activity monitorWhilst wearing the band, it records the number of steps taken by detecting the movement of your wrist. On the basis of the data collected, it then calculates the distance, time taken and calories burnt. The tracking history is available in the app.
Sleep monitorThe band recognizes the beginning and end of the sleeping period. Sleep phase, sleep time and wakeup time data are all shown in the app.
Connecting GPSThe fitness band allows you to use your phone’s GPS whilst do-ing sporting activities. If you choose to record your sport activi-ty in the app, such as running, your locations and location data from the connected phone are recorded during your activity.
Alarm clockGo to alarm settings in the app. Select the time and day for the alarm. At the selected time, the icon will appear on the display and the band will vibrate. Swipe your finger across the display to turn the alarm off.
Inactivity alertIn the app, set the start and end time and days you would like the band to encourage you to be active. If you are not active during this time, the band vibrates and displays a warning.
Find your phoneIn the app settings, turn on the find phone function. Go to the icon in the menu of the band that is paired with your phone. To send a signal to the phone, touch the icon. The phone will ring and then vibrate. If the phone does not respond even after it is turned on, it does not support this function.
Phone camera remoteIn the app, go to the camera controls. The camera shutter is displayed on the paired band’s display. To take a photo, touch the fitness band display.
View weather infoIn the app, you can turn on the weather info. When the band is synchronized with your internet enabled smartphone, it dis-plays the current weather on the screen. Touch the screen to switch to the forecast for the next two days.
View incoming call and message notificationsGo to notification settings in the app. Choose which alerts you want to be displayed on the band. If no notification is received after turning this on, then your smartphone does not support this function.
Resistance to water and dustThe fitness tracker is resistant to the penetration of water and foreign objects according to the IP67 protection rating. This means that it is protected against immersion in water for 30 minutes up to a depth of 1 metre and against the penetration of foreign objects including dust. Never charge the band when it is damp.
Technical specifications
*Modified Android versions from some manufacturers may cause problems with connecting Bluetooth devices. For the current exceptions, check www.lamax-electronics.com/BFit/compatibility
The most up-to-date version of the manual can be found by following this link:
References
[xyz-ips snippet=”download-snippet”]