LASER HD010 DVD Player with HDMi and USB
THE FRONT PANEL
THE REAR PANEL
- HDMI OUT
- COMPONENT OUT (GREEN)
- COMPOSITE OUT (RED)
- COMPONENT OUT (BLUE)
- COMPOSITE OUT (WHITE)
- COMPONENT OUT (RED)
- COMPOSITE OUT (YELLOW)
- MAINS POWER INPUT
REMOTE CONTROL
| 1. | OPEN/CLOSE | Open and close disc tray |
| 2. | POWER | Turn player ON or OFF |
| 3. | AUDIO | Select a different language |
| 4. | MENU | Enter MENU settings screen |
| 5. | MUTE | Turn sound ON/OFF |
| 6. | SUBTITLE | Turn ON/OFF subtitles as supported by your file or disc |
| 7. | [NUMBER KEYS] | Select files and chapters of videos |
| 8. | DISPLAY | Turn ON/OFF time, title and chapter information |
| 9. | COPY/DELETE | Use to manage USB files |
| 10. | SETUP | Enter menu settings |
| 11. | RETURN | Go to the DISC menu screen |
| 12/16. | VOLUME | Turn UP/DOWN volume |
| 12/14
/15/16. |
DIRECTION KEY | Used to move cursor around screen |
| 13. | ENTER | Use to select on option or feature |
| 17/18. | VOLUME | Increase or decrease volume |
| 19. | SLOW | Reduce the speed of video playback |
| 20. | SEARCH | Search by video chapter and time (Some options different for USB/DVD) |
| 21. | PLAY/PAUSE | Press to pause and again to play |
| 22. | A-B | Select segment of video or music for reply |
| 23. | STEP | View playback one frame at a
time |
| 24. | CLEAR | Clear previously selected data and search information |
| 25. | STOP | Stop playback of files |
| 26. | ZOOM | Zoom IN/OUT from an image |
| 27. | MARK | Create playback point |
| 28. | Q-PLAY | Quick play/Direct Play (Go direct to movie and bypass previews) |
| 29. | FAST FORWARD | Fast-forward video or music |
| 30/32. | PREVIOUS/NEXT | Skip forwards/backwards |
| 31. | REWIND | Rewind video or music |
| 33. | PBC | (not available on this model) |
| 34. | CHANNEL | Switch between 2.1 and 5.1 sound output |
| 35. | REPEAT | Repeat the current track |
| 36. | ANGLE | (not available on this model) |
| 37. | USB | Switch between USB and disc playback |
| 38. | PROG | Program the Title and Chapter order of playback |
| 39. | VIDEO | Select video output mode |
| 40. | TITLE | Return to title screen |
SUGGESTED CONNECTIONS
CONNECTING THE HDMI CABLE TO A HOME THEATRE SYSTEM
- Plug the first HDMI cable into the HDMI OUTPUT on the player and into the HDMI input on the Home Theatre System.
- Plug the second HDMI cable into the HDMI OUTPUT on the Home Theatre System and into the HDMI input on the television.
OTHER CONNECTION EXAMPLES
CONNECTING THE PLAYER
- HDMI can transmit both audio and video signals over a single cable. If you have an HDMI capable receiver that can support HDMI audio, you can simply run an HDMI cable from the player to your receiver and enable HDMI audio on the receiver (see your receiver’s owners’ manual for more information). The receiver usually has an HDMI output that you can connect to your TV to pass the video signal.
- HDMI is a wonderful thing. A single cable can transport both audio AND video from your player to your display. Be aware, however, that HDMI is an evolving standard, and there could be compatibility issues. A receiver that supports audio input over HDMI is required.
- Some receivers offer HDMI ports solely for video switching. If your receiver does not have audio input capability, please read the following sections regarding other connection methods.
- In order to play multi-channel audio for all formats, the receiver must support HDMI v1.1 or later. A receiver that supports HDMI v1.3 with decoding capability for Dolby TrueHD and DTS-HD Master Audio is preferred. Please check the specifications of your receiver to ensure that it meets the requirements.
- Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent through the coaxial digital audio output. A reduced resolution version of the same audio track will be output instead. To listen to high resolution audio formats in their best quality, please use the HDMI connection if you have a receiver that handles HDMI audio.
SYSTEM SETTINGS (LAYOUT)Press the SETUP button to enter the SETUP menu. Scroll down and left using the ARROW buttons and the OK button to confirm your selections.When you have finished, repeatedly press the LEFT arrow until the cursor returns to the top MENU tab, otherwise press SETUP again to exit.(Some of the menu screens have been displayed below for your reference.)
FILE PLAYBACK FROM DISC OR USBThe files supported for playback are: Video – AVI (Xvid), VOB, Music – MP3, Image – JPG. Insert your disc or connect your USB thumb drive and press the USB button. The following screen/s will be displayed which will allow you to select a file for playback or for viewing, then press the confirm button to begin.
FAQS
No Video displayed on TV
- Make sure TV is turned on.
- Check the cable connections.
- Check the input selection on the TV is correct. Eg. HDMI1, HDMI2, AV1 or AV2 etc
Player does not respond to remote
- Clear any obstacle between the remote and the player.
- Try moving closer or reduce the angle to the player
- Check the condition of the batteries and replace if necessary.
- Clean the sensor panel on the player.
No audio during DVD/file
- Check the audio output of the player is set correctly.
- If using external amplifier/speakers, ensure connections are correct and amp is turned on.
- Check input on TV/Monitor.
- Check files audio track is supported by this player.
Disc playback is jerkyCheck the condition of the disc. If surface is damaged or scratched repair or replace if necessary.
Video file playback is jerky and stops
- Check the file is compatible with player.
- Check resolution of file. High Definition files may cause intermittent playback issues. Reduce resolution and bit rate of file to improve playback.
Abnormal Player operationsTurn the player off and unplug the player from wall. Wait for 1 or 2 minutes and plug back in.Player should now function normally.
Disc is locked in playerIf the player will not eject disc. Turn the power OFF and then ON again. Immediately press the OPEN/CLOSE button (32) to open the tray.
Some files do not play back. What files are supported?The supported files are; Video-AVI (Xvid), VOB; Audio-MP3 and Image-JPG
SPECIFICATIONS
For further product information and instructions please visit our product web page at www.laserco.com.au or www.laserco.com.au/support
Please note: As continuous improvements are made to this product, slight operational differences may occur. For the most up-to-date user manual, please visit our web site.
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the warranty period.This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage.Please retain your receipt as proof of purchase.
How to make a product warranty claim:
- Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser product and the type of defect.
- Contact your place of purchase. They will assess the nature of the fault and repair, replace or refund the product as per their store refund or warranty policy.
- If your place of purchase cannot be contacted, then you can contact Laser Customer Service with details of your defective Laser Product Phone (02) 9870 3388; or Email: [email protected] or online www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is: Unit 1/6-8 Byfield Street, North Ryde, NSW 2113
- Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective product and a copy of your receipt. Laser will cover the cost of the return delivery.
- Wait for us to contact you. Once we have received your defective Laser product for inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim under this Warranty, and if so, we will inform you whether your defective Laser product will be replaced or repaired, together with the number of days you can expect to wait to receive your replaced or repaired Laser product.
- For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section at www.laserco.com.au/warranty (Consumers Section).
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
report this ad
References
[xyz-ips snippet=”download-snippet”]