Lavaudio DS200 Pro Bluetooth Audio Adapter User Manual

Lavaudio DS200 Pro Bluetooth Audio Adapter User Manual

IN THE BOX

CONTROL FUNCTIONS

  1. Connect
  2. Pair
  3. Play

.

  1. Connect your speaker to DS200Pro audio out port with the audio cable provided (3.5mm/RCA cable).
  2. Connect DS200Pro to a power source with USB cable and adapter.
  3. Short press  button to power on.
  4. Pairing – Pair DS200Pro with your Bluetooth-enabled phone/PC/tablet.
    • Set DS200Pro into the pairing mode, the LED flashes Blue / Red alternately fast.
      • First-time use: DS200Pro will auto enter the pairing mode (with clear memory).
      • Afterward: Long press  button 3s to enter the pairing mode. (The LED flashes Blue / Red alternately fast)
    • Activate Bluetooth on your phone or another device and click “DS200Pro” to connect
    • Wait and connected (For quick pairing, better keep them within 1 meter when pairing).
  5. Enjoy your music.

Pair and connect two devices simultaneously:

  1. Pair with the second device.
    • Long press button 3s to enter the pairing mode again. the LED will flash Blue and Red.
    • Activate Bluetooth on the second device and click “DS200Pro” to pair. Note: You can only play music on one device at a time. you need to pause the music on your device first to play music on the other one.

Scan the code to get more information.

1Mii technologies limited

We hope you never have the need, but if you do, our service is friendly and hassle-free.

[email protected]Web: www.1mii.com

FCC ID: 2AUFR-RT933

 

[xyz-ips snippet=”download-snippet”]


Posted

in

by