LEDWOOD T16 True Wireless Bluetooth Stereo Headset User Manual

LEDWOOD LD-T16-TWS Bluetooth Stereo Headset User Manual

Download the instructions in .pdf format You have trouble pairing the headphones, contact us via the mail below: [email protected]

CHARACTERISTICS

Model: T16Bluetooth Version: V5.0Battery: 30mAh (each earbud), 300mAh (charging case)Charging Time: Approximately 1 hour (earbuds), 2 hours (charging case)Input Rating: DC 5V —1AMusic Playing/Call Time: 4-5 hours per charge Up to 20 hours (with charging case)Bluetooth Connection Distance: Up to 33 feet or 10 meters (No obstacle between)Supporting Protocols: A2DP/HFP/HSP/AVRCPWorking Temperature: -10°C to 40°C

EARBUDS LED INDICATOR GUIDE

System State Indicator Activity
Power on The LED indicator stays blue for 1 second.
Power off The LED indicator flashes red twice.
Pairing mode The LED indicator flashes red and blue alternately.
Charging The LED indicator stays red.
Fully Charged The LED indicator goes off.

CHARGING CASE INDICATOR GUIDE

System State Indicator Activity
Charging The charging case indicator flashes blue slowly.
Fully charged The charging case indicator stays blue.

USING YOUR T16

Charge the earbuds

Put the earbuds into the charging case

Note : When your earbud battery life is low, you will hear a voice reminder.

Charge the charging case

  1. Plug the small end of the USB cable into the Micro USB port of the charging case.
  2. Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.

Note : It takes approximately 2 hours to fully charge the charging case. A fully charged charging case can charge the earbuds approximately 3 times.

POWER ON & OFF

Automatic operation

Power on: Open the lid of the charging case and take the earbuds out.Power off: Put the earbuds back into the charging case.

Note : When the charging case is out of power, putting the earbuds back in the charging case will not turn the earbuds off.

Manual operation

Power on/off: Tap and hold the touch button on the left/right earbud for 5 seconds.

Note : When the two earbuds are paired with the phone, turn off one earbud manually will make the other one be off at the same time.

Pairing & Connectivity

  1. Turn on the Bluetooth of your Bluetooth device.
  2. Take the earbuds out of the charging case and they will enter pairing mode automatically and the LED indicator on the earbud will flash red and blue alternately.
  3. Choose «T16» from the list of found Bluetooth devices on your Bluetooth device to pair.

Notes :

  • Make sure the earbuds and your Bluetooth device are next to each other within 33 feet or 10 meters and there are no obstacles between.
  • If pairing failed, put the earbuds back into the charging case make sure that they have been turned off. Then pair the earbuds with your Bluetooth device again.
  • When the earbuds are on but not paired with a Bluetooth device, they will be automatically off after 5 minutes.
  • The earbuds will connect to the last paired Bluetooth device automatically when they are turned on. Please turn on the Bluetooth of your Bluetooth device before turning on the earbuds.

PRIMARY/SECONDARY MODE

These earbuds have primary-secondary switch function.

  • When the earbuds have been connected to a Bluetooth device, take out either of the two earbuds, it can be connected and used normally. During this period, you can take out the other one and they will pair with each other so you can use both of the earbuds.
  • When both earbuds are connected to your phone, no matter which one is put back to the charging case, you can use the other one without interruption.

EARBUDS FUNCTIONS

Function What to do
Play/Pause Tap the touch button of the left/right earbud.
Next track Double-tap the touch button of the left/right earbud.
Previous track Tap the touch button of the left/right earbud three times.

CALL FUNCTIONS

Function What to do
Answer/end a call Tap the touch button of the left/right earbud.
Decline an incoming call Double-tap the touch button of the left/right earbud.

ACTIVATE VOICE CONTROL OF PHONE

After the earbuds are connected to your phone, tap and hold the touch button for 2 seconds and remove your finger from the touch button.Tap and hold the touch button for 2 seconds again to exit. (This function works only when your phone has voice control function; please refer to the instructions of your phone for details.)

SAFETY AND WARRANTY

Important safety instructions

  • This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy – never allow children to play with this product.
  • None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. please contact us.
  • Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
  • Keep all products, cords, and cables away from operating machinery.
  • If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
  • Do NOT use in areas where there are explosive hazards.
  • Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).
  • Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, water skiing, surfing, etc.
  • This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
  • Dispose of the product according to local standards and regulations.

WARRANTY

We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect.We are happy to offer a two-years hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices. Have servicing performed by a qualified repair person using only identical replacement parts.

EC DECLARATION OF CONFORMITY

Hereby, we :

PRIMETIME – Parc d’activité des Moulins de la LysRue Fleur de Lin, Cellule 7 – 59116 HOUPLINES – FRANCE

Declare that below product(s) :

Product: Earphones BluetoothModel number: LD-T16-TWSFactory model number: T16Commercial brand: LEDWOOD

Complies (comply) to the essential provisions of the EC directive(s) :

Low Voltage directive: EN62368-1:2014+A11:2017 2014/35/EUEMC directive: EN55032:2015; EN55035:2017; EN301489-1V2.2.1 (2019-03); EN301489-17 V3.2.0 (2017-03) 2014/30/EURED/EuP directive: EN300328V2.1.1(2016-11) 2014/53/EUROHS directive: EN50581:2012 2011/65/EU

The essential provisions of the following harmonized standards :

EN 60950-1 : 2006+A11 : 2009+A1 : 2010+A12 : 2011+A2 : 2013EN 62479 : 2010EN 301 489-1 V2.2.0 : 2017-03EN 301 489-17 V3.2.0 : 2017-03EN 300 328 V2.1.1 : 2016-11

LEDWOOD is a trademark owned by PrimetimeCopyright 2020All rights reserved Primetime 2020Imported by PrimetimeMoulins de la Lys business parkFleur de Lin Street, Cell 759116 HOUPLINES – FRANCE

report this ad

Made in the PRC

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by