Lenovo Tab P11 Pro User Guide

Table of Contents

Tab P11 Pro

Lenovo Tab P11 ProSafety, Warranty & Quick Start GuideLenovo TB-J706F Lenovo TB-J706Lhttps://support.lenovo.com https://forums.lenovo.com Read this guide carefully before using your device. All information labeled with * in this guide only refers to the WLAN + LTE model.

Reading before using your deviceReading first – regulatory informationDevice models equipped with wireless communications comply with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. In addition, if your product contains a telecom modem, it complies with the requirements for connection to the telephone network in your country. Be sure to read the Regulatory Notice for your country or region before using the wireless devices contained in your device. To obtain a PDF version of the Regulatory Notice, go to https://support.lenovo.com.Getting supportTo get support on network services and billing, contact your wireless network operator. To learn how to use your device and view its technical specifications, go to https://support.lenovo.com.Accessing your User GuideYour User Guide contains detailed information about your device. To download the publications for your device, go to https://support.lenovo.com and follow the instructions on the screen.Legal noticesLenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. Dolby, Dolby Audio, Dolby Vision, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2020 Dolby Laboratories. All rights reserved. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Device overviewModel Lenovo TB-J706F Lenovo TB-J706L45 64

Version WLAN WLAN + LTE

12

3

3

11

7

7

8 109

7

7

12 13 14

15

1 Volume up button 2 Volume down button

3 Microphones

4 Front camera

5 Light sensor

6 ToF sensor

7 Speakers 10 Card tray

8 USB-C connector

11

Power button/Fingerprint sensor

9 Touch screen 12 Flashlight

13 Rear camera

14 Wide-angle camera

15

4-point pogo-pin smart connector (for the compatible keyboard and Smart Charging Station)

· The WLAN version does not have a Nano-SIM card slot. · USB-C connector only supports the USB-C to 3.5mm digital adapter toconnect a 3.5mm audio plug. · All pictures and illustrations in this document are for your reference only andmay differ from the final product.1

Preparing your deviceInstalling cardsInstall the cards as shown in the figure.

microSD

microSD

SIM

· Power off the device before inserting or removing a card. · Note that the WLAN version does not have a Nano-SIM card slot.Charging your deviceConnect your device to a power outlet using the USB cable and power adapter provided.

Turning onPress and hold the Power button until the Lenovo logo appears.

2

Logging in with your fingerprintTouch the fingerprint sensor to quickly unlock the screen.It is recommended to follow the onscreen instructions and register your fingerprint when powering on your device for the first time. You can also go to Settings > Security > Fingerprint to register a fingerprint.Before using fingerprint functions, you need to set a lock screen password. Go to Settings > Security > Screen lock to set up.Accessories (optional)The accessories do not come with all models, and are sold separately.Keyboard pack1

2

4

3

5

Keyboard

Stand Cover

1 Keyboard connector

2 Keyboard

3 Trackpad

4 Hinge

5 Kickstand

Keyboard layouts vary from country to country. The Keyboard layout in this document is for reference only and your Keyboard may differ.

3

Attaching the Keyboard packAttach the stand cover and keyboard to the tablet as shown in the following figure.

1

2

· When you are attaching the Stand Cover to the Tablet, make sure that the camera hole is aligned with the tablet’s rear cameras.Keyboard pack configurationsThe Tablet can be used with the entire Keyboard pack attached, or with the Stand Cover alone.

4

Opening and adjusting the KickstandYou can adjust the Tablet angle using the Stand Cover. Grasp either side of the kickstand and gently open it until you reach the desired angle.1

2

3

To prevent damage, do not apply excessive pressure to the Stand Cover or force the Kickstand beyond its natural range of motion.· Do not overtilt or apply excessive pressure to the Stand Cover, doing so may damage the hinges.· Adjust the tablet angle by opening the Kickstand and changing the position of the tablet until the desired angle is found.· The Tablet, Keyboard, and Stand Cover all contain magnetic materials. To avoid loss of magnetism, avoid exposing the Tablet, Keyboard, and Stand Cover to high temperatures or direct sunlight.· To prevent demagnetization of credit cards and other items with magnetic data, keep them away from the Tablet, Keyboard, and Stand Cover.5

Lenovo Precision Pen 2You can use the Lenovo Precision Pen 2 in place of your fingers for a better experience, such as working with specific applications to write or draw on the screen.Overview1

1 Pen cap

2 Indicator LED

2

3 Upper button

3 4

4 Lower button

5 Tip

5

Charging the pen

1. Remove the pen cap in the direction

1

shown in the figure.

2. Connect the pen to a charger with a

USB-C cable.

3. Replace the pen cap on the pen.

You can start to use the pen after

charging.

2

3

· The indicator light will have an amber glow while charging the pen and a white glow after it is fully charged.· Please be cautious when using the pen. The pen contains sensitive electronic components. Dropping it may cause damage.

6

Replace tip1. Pinch the tip with tweezers or another suitable tool. 2. Remove the tip. 3. Install the replacement tip (supplied).

1

1

3

2

Store the PenMethod one: 1. Slide the pen into the pen case. 2. Remove the transparent film on the back of the pen case. 3. Stick the pen case to the plastic panel. 4. Thread the ring through the X-shaped hole in the top of the plastic panel.

1

2

3

4

7

Method two: 1. Slide the pen into the pen case. 2. Remove the transparent film on the back of the pen case. 3. Stick the pen case to the back of the tablet or stand cover.

1

2

3

8

Use the pen1. Hold the pen close to the tablet until a white dot appears on the screen. 2. Use the upper and lower button functions of the pen. · Press the upper button to return to the home screen. · Press the lower button to use the Smart Navigation Bar, and then open thesupporting software to write.Using the pen on a coated screen may interfere with the pen-writing experience.9

Important safety and handling informationPlastic bag noticeDanger: Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation.Caution about high volume usageWarning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the sound, the less time is required before your hearing could be affected. To protect your hearing: · Limit the amount of time you use headsets or headphones at high volume. · Avoid turning up the volume to block out noisy surroundings. · Turn the volume down if you can’t hear people speaking near you. If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked.To prevent possible hearing damage, do not listen at high volume levels for long periods.Safety instructions for parents and adult supervisorsYour mobile device is not a toy. As with all electrical products, precautions should be observed during handling and using of electrical products to reduce the risk of electric shock. If parents choose to allow children to use the device, they should caution his or her child about the potential hazard while using and handling the mobile device. Parents should inspect the mobile device (including the ac power adapter and the small part, as applicable) periodically for damage. Routinely check this mobile device to ensure that the device is working properly and is safe for children to use.Internal rechargeable battery warningDanger: Do not attempt to replace the internal rechargeable lithium ion battery. Replacing the original battery with an incompatible type may result in an increased risk of personal injury or property damage due to explosion, excessive heat, or other risks. Do not attempt to disassemble or modify the battery pack. Attempting to do so can cause a harmful explosion or battery fluid leakage.10

When disposing of the battery, comply with all relevant local ordinances or regulations. Do not dispose the battery pack in municipal waste. Dispose used batteries according to the instructions. The battery pack contains a small amount of harmful substances. To avoid injury: · Keep the battery pack away from open flames or other heat sources. · Do not expose the battery pack to water, rain, or other corrosive liquids. · Do not leave the battery in an environment with extremely high temperature. · Avoid short-circuiting the battery pack. · Keep the battery pack out of reach of small children and pets. · Do not leave the battery in an environment with extremely low air pressure. It mayresult in an explosion or the leakage of flammable liquid or gas from the battery. To extend battery life, we recommend charging the battery to at least 30% to 50% capacity each time, and recharging it every three months to prevent over discharge.Eye Protection and Safety InformationThis product carries a TÜV Rheinland Full Care Display certification and combines software and hardware solutions to provide a comfortable and healthy user experience. · The screen has excellent image quality and can accurately represent any color. · The screen surface AG coating and smart ambient light sensor can work togetherto reduce ambient light reflection and adjust the screen brightness effectively. · The screen achieves DC modulation through the full range of luminanceadjustment, reduces hazardous blue light impact to your vision health, and can effectively reduce eye fatigue. To learn more details, please refer to http://support.lenovo.com.cn.EurAsia compliance mark11

Service and support informationLenovo Limited Warranty noticeThis product is covered by the terms of the Lenovo Limited Warranty (LLW), version L5050010-02 08/2011. Read the LLW at https://www.lenovo.com/ warranty/llw_02. You can view the LLW in a number of languages from this website.Warranty informationLenovo provides a warranty period for your device. To check the warranty status of your device purchase upgrades, go to https://support.lenovo.com/warrantylookup, and then select the product and follow the on-screen instructions.Get supportTo download Lenovo service tool – LMSA: https://support.lenovo.com/downloads/lenovo-moto-smart-assitantVisit the website above for information on devices compatible with LMSA. Visit Lenovo’s support website (https://support.lenovo.com) with the device serial number to get more Lenovo support options, or scan the QR code, and then follow the on-screen instructions.12

Environmental, recycling, and disposal informationGeneral recycling statementLenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to http://www.lenovo.com/recycling.Important battery and WEEE informationBatteries and electrical and electronic equipment marked with the symbol of a crossed-out wheeled bin may not be disposed as unsorted municipal waste. Batteries and waste of electrical and electronic equipment (WEEE) shall be treated separately using the collection framework available to customers for the return, recycling, and treatment of batteries and WEEE. When possible, remove and isolate batteries from WEEE prior to placing WEEE in the waste collection stream. Batteries are to be collected separately using the framework available for the return, recycling, and treatment of batteries and accumulators. Country-specific information is available at: http://www.lenovo.com/recyclingRecycling information for JapanRecycling and disposal information for Japan is available at: http://www.lenovo.com/recycling/japanAdditional recycling statementsAdditional information about recycling device components and batteries is in your User Guide. See “Accessing your User Guide” for details.Battery recycling marksBattery recycling information for TaiwanBattery recycling information for the United States and Canada13

Battery recycling information for the European UnionRestriction of Hazardous Substances Directive (RoHS)Turkey Lenovo products sold in Turkey, on or after June 1, 2009, meet the requirements of the former Republic of Turkey Restriction of Hazardous Substances legislation from 30th of May 2008 and the Control of Waste Electrical and Electronic Equipment Regulations from 22nd of May 2012 (“Turkey RoHS”). Ukraine Lenovo products sold in Ukraine, on or after January 1, 2011, meet the requirements of the Technical Directive on Restriction of Hazardous Substances in Electric and Electronic Equipment enforced by the Government, Decision No 1057 dated 2008/12/03″ (“Ukraine TR on RoHS”). India Lenovo products sold in India, on or after May 1, 2012, meet the requirements of the India E-waste (Management) Rules (“India RoHS”). Vietnam Lenovo products sold in Vietnam, on or after September 23, 2011, meet the requirements of the Vietnam Circular 30/2011/TT-BCT (“Vietnam RoHS”). European Union Lenovo Products meet the requirement of Directive 2011/65/EC on the restriction of the use of the certain hazardous substances in electrical and electronic equipment (“RoHS 2”). Lenovo products sold in the European Union, from the 21st July 2019, meet the requirement of Commission Delegated Directive (EU 2015/863) amending Directive 2011/65/EU. For more information about Lenovo progress on RoHS, go to: https://www.lenovo.com/us/en/social_responsibility/RoHS-Communication.pdf Singapore Lenovo products sold in Singapore, on or after June 1, 2017, meet the requirements of Government Gazette order No. S 263/2016 Restriction of Hazardous Substances in Electrical and Electronic Equipment in Singapore (“SG-RoHS”).14

European Union compliance statementEuropean Union conformity

Compliance with the RE DirectiveLenovo PC HK Limited declares that the radio equipment type Lenovo TB-J706F, Lenovo TB-J706L are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.lenovo.com/us/en/compliance/eu-doc This radio equipment operates with the following frequency bands and maximum radio-frequency power:

Model Name Lenovo TB-J706FLenovo TB-J706L

Frequency BandsWLAN 2400-2483.5 WLAN 5150-5725 WLAN 5725-5850 Bluetooth 2400-2483.5 GSM 900 GSM 1800 UMTS B1/B5 UMTS B8 LTE B1/3/5/7/8/20/28/38/41 LTE B40 WLAN 2400-2483.5

Maximum Power (dBm)<20 <20 <14 <20 35 31 25 262524 <20

15

Model Name

Frequency Bands

Maximum Power (dBm)

Lenovo TB-J706L

WLAN 5150-5725

<20

WLAN 5725-5850

<14

Bluetooth 2400-2483.5

<20

Usage of this device is limited to indoor in the band 5150 to 5350MHz.The above information is for EU countries only. Please refer to the actual product for supported frequency bands in other countries.

Specific Absorption Rate informationYOUR MOBILE DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for your device model are listed below:

16

Maximum SAR for this model and conditions under which it was recorded.

Europe 10g SAR Limit (2.0 W/kg)Europe 10g SAR Limit (4.0 W/kg)

Lenovo TB-J706F

Body Limb

WLAN, Bluetooth WLAN, Bluetooth

1.409 W/kg1.409 W/kg

Europe 10g SAR Limit (2.0 W/kg)Europe 10g SAR Limit (4.0 W/kg)

Lenovo TB-J706L

Body Limb

LTE B28, WLAN, BluetoothLTE B28, WLAN, Bluetooth

1.546 W/kg1.546 W/kg

During use, the actual SAR values for your device are usually well below the values stated. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the data connection. The lower the power output of the device, the lower its SAR value. If you are interested in further reducing your RF exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.

17

© Copyright Lenovo 2020.

V1.0_20200804

SSC8C92416

report this ad

MC Printed in China

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by