Lenovo ThinkPad USB 3.0 Hard Drive User Guide

ThinkPad USB 3.0 Secure Hard DriveUser Guide

http://www.lenovo.com/safetyNote: Before installing the product, be sure to read the warranty information in Appendix B “Lenovo Limited Warranty” on page 15.

Second Edition (January 2012)© Copyright Lenovo 2011, 2012.LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Chapter 1. About the secure hard drive

This chapter provides product information about the ThinkPad® USB 3.0 Secure Hard Drive (hereafter called the secure hard drive).

Product description

The secure hard drive is a portable, light-weight, and high-speed USB (Universal Serial Bus) 3.0 standard option that offers high-level data security. You can transfer data using the integrated USB cable on the secure hard drive or the provided USB 3.0 Y cable. In addition to regular USB 3.0 hard disk drive functions, it also provides you with an easy-to-use full disk encryption solution. All the functions are integrated into the secure hard drive; therefore, you can access the secure hard drive and manage passwords without using other software applications.The secure hard drive has three working modes: standby mode, administrator mode, and user mode. For more information about the working modes, refer to Chapter 3 “Using the secure hard drive” on page 5. Note: Passwords are required for administrator mode and user mode. Accordingly, they are called the administrator password and the user password.Your option package includes the following:

  • ThinkPad USB 3.0 Secure Hard Drive
  • USB 3.0 Y cable
  • Carrying case
  • Setup and warranty poster
Overview

The following figure shows the overview of the secure hard drive.

Figure 1. Overview of the secure hard drive

  1. Status LED (light-emitting diode)The status LED indicates the working modes:• Red: standby mode• Blue: administrator mode• Green: user modeFor more information about the working modes and the status LED, refer to Chapter 3 “Using the secure hard drive” on page 5.
  2. buttonUse this button to do the following:• Canceling the current operation• Returning to the previous step when you accidently input a wrong password• Exiting administrator mode and user mode• Manually locking the secure hard drive
  3.  buttonUse this button to access the secure hard drive or give an OK acknowledgement for the following operations:• Inputting a password• Confirming a new password
  4. Integrated USB cableYou can connect the secure hard drive to your computer using the integrated USB cable. For more information, refer to “Installing the secure hard drive” on page 3.

Chapter 2. Installing the secure hard drive

This chapter provides information about how to install the secure hard drive.

Before you begin

Be sure to carefully read the following information before installing and using the secure hard drive.

Attention:

  • Make sure that you use the integrated USB cable on the secure hard drive or the provided USB 3.0 Y cable to install the secure hard drive. Using any cables other than the two cables might damage the secure hard drive.
  • Carefully handle the secure hard drive. When the secure hard drive is not in use or you need to ship it to a different location, place it in the provided carrying case.
  • To get reliable performance of the secure hard drive, make sure that the integrated USB cable on the secure hard drive or the provided USB 3.0 Y cable is connected to the USB connectors on your computer or to an ac-powered USB hub. Do not connect the two cables to a non-ac-powered USB hub.
Installing the secure hard drive

To install the secure hard drive, do one of the following:

  • Connect the integrated USB cable on the secure hard drive to a USB 2.0 or USB 3.0 connector on your computer. When the connection is established, the status LED turns red.

Figure 2. Installing the secure hard drive using the integrated USB cable

  • Connect the USB receptacle connector of the USB 3.0 Y cable to the integrated USB cable on the secure hard drive, and then connect the two USB connectors at the other end of the USB 3.0 Y cable to two USB 2.0 or USB 3.0 connectors on your computer. When the connection is established, the status LED turns red.Figure 3. Installing the secure hard drive using the USB 3.0 Y cableNote: For computers with USB 3.0 connectors, you can connect the secure hard drive to a USB 3.0 connector on the computer using only the main connector of the USB 3.0 Y cable. For computers with only USB 2.0 connectors, to ensure sufficient power supply, it is recommended that you connect both the main connector and the additional power supply connector of the USB 3.0 Y cable to the computer.Figure 4. Overview of the USB 3.0 Y cable
  1. Additional power supply connector
  2. Main connector
  3. USB receptacle connector

Chapter 3. Using the secure hard drive

This chapter provides information about how to use the secure hard drive.

Entering and exiting the working modes

This section provides information about how to enter and exit standby mode, administrator mode, and user mode of the secure hard drive.

Entering standby modeStandby mode is the default working mode of the secure hard drive. In this mode, the secure hard drive is locked; therefore, it cannot be recognized by the operating system. However, standby mode enables you to enter and switch between administrator mode and user mode.

To enter standby mode, connect the secure hard drive to your computer. When the status LED turns red, it indicates that the secure hard drive goes into standby mode. For more information about how to connect the secure hard drive, refer to “Installing the secure hard drive” on page 3.

Note: To switch between administrator mode and user mode, you are required to firstly switch to standby mode, and then you can enter your desired mode.

Entering administrator modeIn administrator mode, you can change the administrator password, create up to 10 user passwords, delete all user passwords, and set the auto-lock function. For more information, see “Password management” on page 6 and “Lock the secure hard drive with the auto-lock function” on page 8. The secure hard drive is locked in this mode; therefore, it cannot be recognized by the operating system.

To enter administrator mode, do the following:

  1. Connect the secure hard drive to your computer. When the status LED turns red, it indicates that the secure hard drive goes into standby mode. For more information about how to connect the secure hard drive, refer to “Installing the secure hard drive” on page 3.
  2. Hold +0 for five seconds until the status LED flashes in red. This indicates that you can input the administrator password.
  3. Input the administrator password and press to enter administrator mode. The default administrator password is 12345678. When the status LED turns blue, it indicates that the secure hard drive goes into administrator mode.Note: If the status LED flashes in red for a few seconds after you input the administrator password, it indicates that the secure hard drive has returned to standby mode. You need to go back to step 2 to enter administrator mode again. This problem is caused by one of the following reasons:
  • An incorrect administrator password is input in step 3.
  • No activity is detected within two minutes in administrator mode.

Exiting administrator modeTo exit administrator mode, hold until the status LED turns red. The secure hard drive goes into standby mode.

Entering user modeIn user mode, you can access the secure hard drive and change the current user password. The secure hard drive is unlocked in this mode; therefore, you can use it to transfer data.To enter user mode, do the following:

  1. Connect the secure hard drive to your computer. When the status LED turns red, it indicates that the secure hard drive goes into standby mode. For more information about how to connect the secure hard drive, refer to “Installing the secure hard drive” on page 3.
  2. Input the user password or the administrator password, and then press . When the status LED turns green, it indicates that the secure hard drive goes into user mode. If the status LED flashes in red, this indicates that an incorrect password is input. You can choose either to input again or to reset your secure hard drive. For more instructions about resetting your secure hard drive, see “Completely resetting the secure hard drive” on page 9.

Notes:

  • If you incorrectly input the user password or the administrator password six consecutive times, the secure hard drive will no longer respond and the status LED will turn off. You need to disconnect the secure hard drive, and then reconnect it to your computer for additional password attempts.
  • If you incorrectly input the user password or the administrator password 25 consecutive times, the secure hard drive will be locked and the status LED will quickly flash in red. To unlock the secure hard drive, do the following:
  1. Disconnect the secure hard drive from your computer.
  2. Hold 5 while reconnecting the secure hard drive to your computer. The status LED alternately flashes in red and in green.
  3. Press 5278879. The status LED turns red, indicating that the secure hard drive is unlocked for additional password attempts.
  • If you incorrectly input the user password or the administrator password 50 consecutive times, the secure hard drive will be locked and the status LED will quickly flash in red. The secure hard drive has to be completely reset and then formatted. For more information, see “Completely resetting the secure hard drive” on page 9 and “Initializing and formatting the secure hard drive after a complete reset” on page 9.

Exiting user modeAttention: Be sure to save all documents on the secure hard drive before exiting user mode.To exit user mode, do one of the following:

  • Hold until the status LED turns red.
  • Click the Safely Remove Hardware icon in the notification area on your computer screen. A message will be displayed, prompting you that you can safely disconnect the secure hard drive from your computer. Then, depending on your operating system, the status LED stays in green or turns red. You can choose whether to disconnect the secure hard drive or not.Note: It is not recommended to exit user mode when the secure hard drive is transferring data.
Password management

This section provides information about managing your administrator password and user password.

Changing the administrator passwordTo change the administrator password, do the following:

  1. Enter administrator mode. See “Entering administrator mode” on page 5 for more information.
  2. Hold +9 until the status LED flashes in blue.
  3. Input a new administrator password (a minimum of eight digits and a maximum of 16 digits), and then press . The status LED flashes in green three times.Note: If the status LED flashes in red three times, it indicates that the new administrator password is less than eight digits or more than 16 digits. After the status LED flashes in blue, input an administrator password that contains eight to 16 digits.
  4. Input the new administrator password again, and then press . The status LED stays in green for three seconds, indicating that the administrator password is successfully changed.

Notes:

  • If the status LED flashes in red three times and then flashes in blue, go back to step 3. This problem is caused by one of the following reasons: ­– You wait longer than 10 seconds before inputting the new administrator password. ­– The new administrator password is incorrectly input.
  • If no activity is detected within two minutes in administrator mode, the secure hard drive will return to standby mode.

Adding a new user passwordThe secure hard drive enables you to have up to 10 user passwords. To add a new user password, do the following:

  1. Enter administrator mode. See “Entering administrator mode” on page 5 for more information.
  2. Hold +1 until the status LED flashes in blue.
  3. Input a new user password (a minimum of eight digits and a maximum of 16 digits), and then press . The status LED flashes in green three times.Note: If the status LED flashes in red three times, this indicates that the new user password is less than eight digits or more than 16 digits. After the status LED flashes in blue, input a user password that contains eight to 16 digits.
  4. Input the new user password again, and then press . The status LED stays in green for three seconds, indicating that the user password is successfully added.

Notes:

  • If the status LED flashes in red three times and then flashes in blue, go back to step 3. This problem is caused by one of the following reasons:-­ You wait longer than 10 seconds before inputting the new user password. ­-The new user password is incorrectly input.
  • If no activity is detected within two minutes in administrator mode, the secure hard drive will return to standby mode.

Changing the user passwordNote: If you have more than one user password, you can change only one user password at a time.To change the user password, do the following:

  1. Enter user mode. See “Entering user mode” on page 6 for more information.
  2. Hold +1 for five seconds until the status LED flashes in red.
  3. Input the current user password, and then press . The status LED turns green for three seconds, and then it flashes in blue.Note: If the status LED flashes in red, go back to step 2. This problem is caused by one of the following reasons:• You wait longer than 10 seconds before inputting the new user password.• The current user password is incorrectly input.
  4. Input a new user password (a minimum of eight digits and a maximum of 16 digits), and then press . The status LED flashes in green three times, and then it flashes in blue.Note: If the status LED flashes in red three times, this indicates that the new user password is less than eight digits or more than 16 digits. After the status LED flashes in blue, input a user password that contains eight to 16 digits.
  5. Input the new user password again, and then press . The status LED stays in green, indicating that the user password is successfully changed.Note: If the status LED flashes in red three times and then flashes in blue, go back to step This problem is caused by one of the following reasons:• You wait longer than 10 seconds before inputting the new user password.• The new user password is incorrectly input.

Note: The administrator password can be used as a user password. An administrator password can be changed only in administrator mode. For more information, see “Changing the administrator password” on page 6.

Deleting the user password(s)To delete the user password(s), do the following:

  1. Enter administrator mode. See “Entering administrator mode” on page 5 for more information.
  2. Hold 7+8+ for five seconds until the status LED flashes in blue. After that, the status LED flashes in green three times, and then flashes in blue.
  3. Hold 7+8+ for five seconds again until the status LED becomes green for three seconds and then turns blue. This indicates that the user password(s) are successfully deleted.Attention:If you have more than one user password, all user passwords will be deleted at a time.
Lock the secure hard drive

To ensure the data security of your secure hard drive when you are away from your computer, you can manually lock the secure hard drive or use the auto-lock function.

Manually lock the secure hard driveTo manually lock the secure hard drive, hold until the status LED turns red.

Lock the secure hard drive with the auto-lock functionIf there is no data transmission after an auto-lock interval, which you need to set in advance, the secure hard drive will lock itself. Then, the status LED will turn red, and you will not be able to access the secure hard drive unless you unlock it by inputting the correct user password and then press .

To set the auto-lock interval, do the following:

  1. Enter administrator mode. See “Entering administrator mode” on page 5 for more information.
  2. Hold +6 until the status LED alternately flashes in red and in blue.
  3. Set the auto-lock interval by pressing the following numeric keys:
  • 0: If you press this numeric key, the auto-lock function will be disabled.
  • 1: If you press this numeric key, the auto-lock interval will be five minutes.
  • 2: If you press this numeric key, the auto-lock interval will be 10 minutes.
  • 3: If you press this numeric key, the auto-lock interval will be 20 minutes.Note: By default, the auto-lock function is disabled.

Note: Be sure to save all documents on the secure hard drive before the secure hard drive locks itself. If any document is not saved before the secure hard drive locks itself, a message box will be displayed, reminding you that the document directory cannot be found. You need to unlock the secure hard drive to save the document.

Hibernating, suspending, or logging off from the operating system

Before hibernating, suspending, or logging off from the operating system, do the following:

  1. Save and close all the files on the secure hard drive.
  2. Click the Safely Remove Hardware icon in the notification area on your computer screen. Then, a message is displayed, prompting you that you can safely disconnect the secure hard drive from your computer. You can choose whether to disconnect the secure hard drive or not.Note: To ensure the data integrity of your secure hard drive, be sure to lock or disconnect your secure hard drive if you are away from your computer or you are sharing your computer with others using different Windows® user accounts.
Completely resetting the secure hard drive

If you forget all user passwords or the administrator password, you can perform a complete reset to delete all user passwords, and restore the administrator password to 12345678.

Attention: Completely resetting the secure hard drive will erase all the data on the secure hard drive. You need to initialize and format the secure hard drive with the disk management application. For more information, see “Initializing and formatting the secure hard drive after a complete reset” on page 9. To completely reset the secure hard drive, do the following:

  1. Hold while you connect the secure hard drive to your computer. The status LED alternately flashes in blue and in red.Note: If no activity is detected for 30 seconds in this step, the secure hard drive will go into standby mode.
  2. Hold + +2 for 10 seconds until the status LED turns green for three seconds. The complete reset finishes.
  3. Disconnect the secure hard drive from your computer.
Initializing and formatting the secure hard drive after a complete reset

A complete reset of the secure hard drive will erase all information and partition settings on the secure hard drive. You need to initialize and format the secure hard drive after a complete reset.

Attention: It is not recommended to initialize and format the secure hard drive on a Microsoft® Windows XP operating system because this might decrease the writing speed of the secure hard drive. To initialize and format the secure hard drive, do the following:

  1. After a complete reset, connect the secure hard drive to your computer.
  2. Input the default user password 12345678, and then press to enter user mode. The operating system automatically installs all the USB device drivers for the secure hard drive.
  3. Depending on your Start mode, click Start and then right-click My Computer or Computer. Select Manage, and the Computer Management window opens.
  4. In the Computer Management window, click Disk Management. The Disk Management window opens, and the secure hard drive is recognized as an unknown device that is uninitialized and unallocated.
  5. Do one of the following to make the secure hard drive recognized:• If the Initialize and Convert Disk Wizard window opens, click Next Next Finish.• If the Initialize and Convert Disk Wizard window does not open, do the following:a. Right-click Unknown Disk, and then select Initialize Disk.b. In the Initialize Disk window, click OK.
  6. Right-click your mouse in the blank area of the unallocated device section, and then select New Partition. The Welcome to the New Partition Wizard window opens.
  7. Click Next → Next → Next.
  8. Input a name for the volume label and select Perform a quick format. Then, click Next.
  9. Click Finish. Wait until the format process completes. The secure hard drive will be recognized and it will be ready for use.

Chapter 4. Troubleshooting

This chapter contains troubleshooting information for the secure hard drive. If you encounter any of the following problems when using the secure hard drive, refer to the corresponding answers.Q: Why could I not enter user mode after I connect the secure hard drive to the computer and input the correct user password?A: The secure hard drive needs several seconds to be ready for password input. To solve the problem, wait for several seconds after you connect the secure hard drive to the computer, and then input your user password.Q: What can I do if I forget the user password?A: You can create a user password. To create a user password, do the following:

  1. Enter administrator mode. See “Entering administrator mode” on page 5 for more information.
  2. Delete all user passwords. See “Deleting the user password(s)” on page 8 for more information.
  3. Create your new user password. See “Adding a new user password” on page 7 for more information.Q: What can I do if I forget the administrator password?A: There is no other way to retrieve the administrator password except a complete reset of the secure hard drive. After a complete reset, all data will be lost and you need to manually initialize and format the secure hard drive. Then you will be able to use the default administrator password 12345678. For more information, see “Completely resetting the secure hard drive” on page 9 and “Initializing and formatting the secure hard drive after a complete reset” on page 9. Q: Why does the operating system not recognize the secure hard drive after I completely reset it and enter user mode?A: You need to manually initialize and format the secure hard drive before you can use it. For more information, refer to “Initializing and formatting the secure hard drive after a complete reset” on page 9.Q: Can I initialize and format the secure hard drive with a Windows user account?A: No, this is a limitation of the Windows operating systems. You should use the Windows administrator account to initialize and format the secure hard drive. Q: How do I use the secure hard drive without a password?A: As a full disk encryption product, the secure hard drive can never be used without a password.Q: What encryption algorithm is used in this product?A: The secure hard drive uses the Advanced Encryption Standard (AES) 256-bit algorithm.Q: Why could I not initialize, partition, or format the secure hard drive?A: Ensure that you have administrator privileges. You can use only the Windows administrator account to initialize, partition, or format the secure hard drive in administrator mode.Q: Why could the operating system not be started from the secure hard drive?A: As this is a secure hard drive, before you use it, you will need several seconds to input a password and unlock the secure hard drive. When the secure hard drive is unlocked, the operating system has already finished the startup process.

Appendix A. Service and Support

The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms.

Online technical supportOnline technical support is available during the lifetime of a product at: http://support.lenovo.comProduct replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.

Telephone technical supportInstallation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.

Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.

Your technical support representative might want to walk you through the problem while you are at your computer during the call. Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at http://www.lenovo.com/support/phone. If the telephone number for your country or region is not listed, contact your Lenovo reseller or Lenovo marketing representative.

Appendix B. Lenovo Limited Warranty

L505-0010-02 08/2011This Lenovo Limited Warranty consists of the following parts:Part 1 – General TermsPart 2 – Country-specific TermsPart 3 – Warranty Service Information

The terms of Part 2 replace or modify terms of Part 1 as specified for a particular country.Part 1 – General TermsThis Lenovo Limited Warranty applies only to Lenovo hardware products you purchased for your own use and not for resale. This Lenovo Limited Warranty is available in other languages at www.lenovo.com/warranty.

What this Warranty CoversLenovo warrants that each Lenovo hardware product that you purchase is free from defects in materials and workmanship under normal use during the warranty period. The warranty period for the product starts on the original date of purchase as shown on your sales receipt or invoice or as may be otherwise specified by Lenovo. The warranty period and type of warranty service that apply to your product are as specified in “Part 3 – Warranty Service Information” below. This warranty only applies to products in the country or region of purchase.

THIS WARRANTY IS YOUR EXCLUSIVE WARRANTY AND REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AS SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF EXPRESS OR IMPLIED WARRANTIES, THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES APPLY ONLY TO THE EXTENT AND FOR SUCH DURATION AS REQUIRED BY LAW AND ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. AS SOME STATES OR JURISDICTIONS DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, THE ABOVE LIMITATION ON DURATION MAY NOT APPLY TO YOU.

How to Obtain Warranty ServiceIf the product does not function as warranted during the warranty period, you may obtain warranty service by contacting Lenovo or a Lenovo approved Service Provider. A list of approved Service Providers and their telephone numbers is available at: www.lenovo.com/support/phone.

Warranty service may not be available in all locations and may differ from location to location. Charges may apply outside a Service Provider’s normal service area. Contact a local Service Provider for information specific to your location.

Customer Responsibilities for Warranty ServiceBefore warranty service is provided, you must take the following steps:

  • follow the service request procedures specified by the Service Provider;
  • backup or secure all programs and data contained in the product;
  • provide the Service Provider with all system keys or passwords;
  • provide the Service Provider with sufficient, free, and safe access to your facilities to perform service;
  • remove all data, including confidential information, proprietary information and personal information, from the product or, if you are unable to remove any such information, modify the information to prevent its access by another party or so that it is not personal data under applicable law. The Service Provider shall not be responsible for the loss or disclosure of any data, including confidential information, proprietary information, or personal information, on a product returned or accessed for warranty service;
  • remove all features, parts, options, alterations, and attachments not covered by the warranty;
  • ensure that the product or part is free of any legal restrictions that prevent its replacement;
  • if you are not the owner of a product or part, obtain authorization from the owner for the Service Provider to provide warranty service.

What Your Service Provider Will Do to Correct ProblemsWhen you contact a Service Provider, you must follow the specified problem determination and resolution procedures.

The Service Provider will attempt to diagnose and resolve your problem by telephone, e-mail or remote assistance. The Service Provider may direct you to download and install designated software updates.

Some problems may be resolved with a replacement part that you install yourself called a “Customer Replaceable Unit” or “CRU.” If so, the Service Provider will ship the CRU to you for you to install.

If your problem cannot be resolved over the telephone; through the application of software updates or the installation of a CRU, the Service Provider will arrange for service under the type of warranty service designated for the product under “Part 3 – Warranty Service Information” below.

If the Service Provider determines that it is unable to repair your product, the Service Provider will replace it with one that is at least functionally equivalent. If the Service Provider determines that it is unable to either repair or replace your product, your sole remedy under this Limited Warranty is to return the product to your place of purchase or to Lenovo for a refund of your purchase price.

Replacement Products and PartsWhen warranty service involves the replacement of a product or part, the replaced product or part becomes Lenovo’s property and the replacement product or part becomes your property. Only unaltered Lenovo products and parts are eligible for replacement. The replacement product or part provided by Lenovo may not be new, but it will be in good working order and at least functionally equivalent to the original product or part. The replacement product or part shall be warranted for the balance of the period remaining on the original product. Use of Personal Contact Information If you obtain service under this warranty, you authorize Lenovo to store, use and process information about your warranty service and your contact information, including name, phone numbers, address, and e-mail address. Lenovo may use this information to perform service under this warranty. We may contact you to inquire about your satisfaction with our warranty service or to notify you about any product recalls or safety issues. In accomplishing these purposes, you authorize Lenovo to transfer your information to any country where we do business and to provide it to entities acting on our behalf. We may also disclose it where required by law. Lenovo’s privacy policy is available at www.lenovo.com/.

What this Warranty Does not CoverThis warranty does not cover the following:

  • uninterrupted or error-free operation of a product;
  • loss of, or damage to, your data by a product;
  • any software programs, whether provided with the product or installed subsequently;
  • failure or damage resulting from misuse, abuse, accident, modification, unsuitable physical or operating environment, natural disasters, power surges, improper maintenance, or use not in accordance with product information materials;
  • damage caused by a non-authorized service provider;
  • failure of, or damage caused by, any third party products, including those that Lenovo may provide or integrate into the Lenovo product at your request;
  • any technical or other support, such as assistance with “how-to” questions and those regarding product set-up and installation;
  • products or parts with an altered identification label or from which the identification label has been removed.

Limitation of LiabilityLenovo is responsible for loss or damage to your product only while it is in the Service Provider’s possession or in transit, if the Service Provider is responsible for the transportation.

Neither Lenovo nor the Service Provider is responsible for loss or disclosure of any data, including confidential information, proprietary information, or personal information, contained in a product.

UNDER NO CIRCUMSTANCES, AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY SET FORTH HEREIN, SHALL LENOVO, ITS AFFILIATES, SUPPLIERS, RESELLERS, OR SERVICE PROVIDERS BE LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR POSSIBILITY AND REGARDLESS OF WHETHER THE CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY OR OTHER THEORY OF LIABILITY: 1) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES; 2) LOSS, DAMAGE OR DISCLOSURE OF YOUR DATA; 3) SPECIAL, INCIDENTAL, PUNITIVE, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED SAVINGS. IN NO CASE SHALL THE TOTAL LIABILITY OF LENOVO, ITS AFFILIATESS, SUPPLIERS, RESELLERS OR SERVICE PROVIDERS FOR DAMAGES FROM ANY CAUSE EXCEED THE AMOUNT OF ACTUAL DIRECT DAMAGES, NOT TO EXCEED THE AMOUNT PAID FOR THE PRODUCT.

THE FOREGOING LIMITATIONS DO NOT APPLY TO DAMAGES FOR BODILY INJURY (INCLUDING DEATH), DAMAGE TO REAL PROPERTY OR DAMAGE TO TANGIBLE PERSONAL PROPERTY FOR WHICH LENOVO IS LIABLE UNDER LAW. AS SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Your Other RightsTHIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS ACCORDING TO THE APPLICABLE LAWS OF YOUR STATE OR JURISDICTION. YOU MAY ALSO HAVE OTHER RIGHTS UNDER A WRITTEN AGREEMENT WITH LENOVO. NOTHING IN THIS WARRANTY AFFECTS STATUTORY RIGHTS, INCLUDING RIGHTS OF CONSUMERS UNDER LAWS OR REGULATIONS GOVERNING THE SALE OF CONSUMER GOODS THAT CANNOT BE WAIVED OR LIMITED BY CONTRACT.Part 2 – Country-specific TermsAustralia“Lenovo” means Lenovo (Australia & New Zealand) Pty Limited ABN 70 112 394 411. Address: Level 10, North Tower, 1-5 Railway Street, Chatswood, NSW, 2067. Telephone: +61 2 8003 8200. Email: [email protected]

The following replaces the same section in Part 1:

What this Warranty Covers:Lenovo warrants that each hardware product that you purchase is free from defects in materials and workmanship under normal use and conditions during the warranty period. If the product fails due to a covered defect during the warranty period, Lenovo will provide you a remedy under this Limited Warranty. The warranty period for the product starts on the original date of purchase specified on your sales receipt or invoice unless Lenovo informs you otherwise in writing. The warranty period and type of warranty service that apply to your product are set forth below in Part 3 -Warranty Service Information.

THE BENEFITS GIVEN BY THIS WARRANTY ARE IN ADDITION TO YOUR RIGHTS AND REMEDIES AT LAW, INCLUDING THOSE UNDER THE AUSTRALIAN CONSUMER LAW.

The following replaces the same section in Part 1:

Replacement Products and Parts:When warranty service involves the replacement of a product or part, the replaced product or part becomes Lenovo’s property and the replacement product or part becomes your property. Only unaltered Lenovo products and parts are eligible for replacement. The replacement product or part provided by Lenovo may not be new, but it will be in good working order and at least functionally equivalent to the original product or part. The replacement product or part shall be warranted for the balance of the period remaining on the original product. Products and parts presented for repair may be replaced by refurbished products or parts of the same type rather than being repaired. Refurbished parts may be used to repair the product; and repair of the product may result in loss of data, if the product is capable of retaining user-generated data.

The following is added to the same section in Part 1:

Use of Personal Contact Information:Lenovo will not be able to perform our service under this warranty if you refuse to provide your information or do not wish us to transfer your information to our agent or contractor. You have the right to access your personal contact information and request correction of any errors in it pursuant to the Privacy Act 1988 by contacting Lenovo.

The following replaces the same section in Part 1:

Limitation of Liability:Lenovo is responsible for loss or damage to your product only while it is in the Service Provider’s possession or in transit, if the Service Provider is responsible for the transportation.

Neither Lenovo nor the Service Provider is responsible for loss or disclosure of any data, including confidential information, proprietary information, or personal information, contained in a product.

TO THE EXTENT PERMITTED BY LAW, UNDER NO CIRCUMSTANCES AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY SET FORTH HEREIN, SHALL LENOVO, ITS AFFILIATES, SUPPLIERS, RESELLERS, OR SERVICE PROVIDERS BE LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR POSSIBILITY AND REGARDLESS OF WHETHER THE CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY OR OTHER THEORY

OF LIABILITY: 1) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES; 2) LOSS, DAMAGE OR DISCLOSURE OF YOUR DATA; 3) SPECIAL, INCIDENTAL, PUNITIVE, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED SAVINGS. IN NO CASE SHALL THE TOTAL LIABILITY OF LENOVO, ITS AFFILIATESS, SUPPLIERS, RESELLERS OR SERVICE PROVIDERS FOR DAMAGES FROM ANY CAUSE EXCEED THE AMOUNT OF ACTUAL DIRECT DAMAGES, NOT TO EXCEED THE AMOUNT PAID FOR THE PRODUCT.

THE FOREGOING LIMITATIONS DO NOT APPLY TO DAMAGES FOR BODILY INJURY (INCLUDING DEATH), DAMAGE TO REAL PROPERTY OR DAMAGE TO TANGIBLE PERSONAL PROPERTY FOR WHICH LENOVO IS LIABLE UNDER LAW.

The following replaces the same section in Part 1:

Your Other Rights:THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU ALSO HAVE OTHER RIGHTS AT LAW, INCLUDING UNDER THE AUSTRALIAN CONSUMER LAW. NOTHING IN THIS WARRANTY AFFECTS STATUTORY RIGHTS OR RIGHTS AT LAW, INCLUDING RIGHTS THAT CANNOT BE WAIVED OR LIMITED BY CONTRACT.

For example, our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the products repaired or replaced if the products fail to be of acceptable quality and the failure does not amount to a major failure.

New Zealand

The following is added to the same section in Part 1:

Use of Personal Information:Lenovo will not be able to perform our service under this warranty if you refuse to provide your information or do not wish us to transfer your information to our agent or contractor. You have the right to access your personal information and request correction of any errors in it pursuant to the Privacy Act 1993 by contacting Lenovo (Australia & New Zealand) Pty Limited ABN 70 112 394 411. Address: Level 10, North Tower, 1-5 Railway Street, Chatswood, NSW, 2067. Telephone: 61 2 8003 8200. Email: [email protected]

Bangladesh, Cambodia, India, Indonesia, Nepal, Philippines, Vietnam and Sri Lanka

The following is added to Part 1:

Dispute ResolutionDisputes arising out of or in connection with this warranty shall be finally settled by arbitration held in Singapore. This warranty shall be governed, construed and enforced in accordance with the laws of Singapore, without regard to conflict of laws. If you acquired the product in India, disputes arising out of or in connection with this warranty shall be finally settled by arbitration held in Bangalore, India. Arbitration in Singapore shall be held in accordance with the Arbitration Rules of Singapore International Arbitration Center (“SIAC Rules”) then in effect. Arbitration in India shall be held in accordance with the laws of India then in effect. The arbitration award shall be final and binding on the parties without appeal. Any award shall be in writing and set forth the findings of fact and the conclusions of law. All arbitration proceedings, including all documents presented in such proceedings shall be conducted in the English language. The English language version of this warranty prevails over any other language version in such proceedings.

European Economic Area (EEA)

The following is added to Part 1:

Customers in the EEA may contact Lenovo at the following address: EMEA Service Organisation, Lenovo (International) B.V., Floor 2, Einsteinova 21, 851 01, Bratislava, Slovakia. Service under this warranty for Lenovo hardware products purchased in EEA countries may be obtained in any EEA country in which the product has been announced and made available by Lenovo.

Russia

The following is added to Part 1:

Product Service LifeThe product service life is four (4) years from the original date of purchase.

Part 3 – Warranty Service Information

Product Type Country or Region of Purchase Warranty Period

Type of Warranty Service

ThinkPad USB 3.0 Secure Hard Drive Worldwide 3 Years 1,1

If required, your Service Provider will provide repair or exchange service depending on the type of warranty service specified for your product and the available service. Scheduling of service will depend upon the time of your call, parts availability, and other factors.

Types of Warranty Service

  1. Customer Replaceable Unit (“CRU”) ServiceUnder CRU Service, the Service Provider will ship CRUs to you at its cost for installation by you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. CRUs that are easily installed by you are called “Self-service CRUs”. “Optional-service CRUs” are CRUs that may require some technical skill and tools. Installation of Self-service CRUs is your responsibility. You may request that a Service Provider install Optional-service CRUs under one of the other types of warranty service designated for your product. An optional service offering may be available for purchase from a Service Provider or Lenovo under which Self-service CRUs would be installed for you. You may find a list of CRUs and their designation in the publication that was shipped with your product or at www.lenovo.com/CRUs. The requirement to return a defective CRU, if any, will be specified in the instructions shipped with a replacement CRU. When return is required: 1) return instructions, a prepaid return shipping label, and a container will be included with the replacement CRU; and 2) you may be charged for the replacement CRU if the Service Provider does not receive the defective CRU from you within thirty (30) days of your receipt of the replacement CRU.
  2. On-site ServiceUnder On-Site Service, a Service Provider will either repair or exchange the product at your location. You must provide a suitable working area to allow disassembly and reassembly of the product. Some repairs may need to be completed at a service center. If so, the Service Provider will send the product to the service center at its expense.
  3. Courier or Depot ServiceUnder Courier or Depot Service, your product will be repaired or exchanged at a designated service center, with shipping at the expense of the Service Provider. You are responsible for disconnecting the product and packing it in a shipping container provided to you to return your product to a designated service center. A courier will pick up your product and deliver it to the designated service center. The service center will return the product to you at its expense.
  4. Customer Carry-In ServiceUnder Customer Carry-In Service, your product will be repaired or exchanged after you deliver it to a designated service center at your risk and expense. After the product has been repaired or exchanged, it will be made available to you for collection. If you fail to collect the product, the Service Provider may dispose of the product as it sees fit, with no liability to you.
  5. Mail-In ServiceUnder Mail-In Service, your product will be repaired or exchanged at a designated service center after you deliver it at your risk and expense. After the product has been repaired or exchanged, it will be returned to you at Lenovo’s risk and expense, unless the Service Provider specifies otherwise.
  6. Customer Two-Way Mail-In ServiceUnder Customer Two-Way Mail-In Service, your product will be repaired or exchanged after you deliver it to a designated service center at your risk and expense. After the product has been repaired or exchanged, it will be made available to you for return shipping at your risk and expense. If you fail to arrange return shipment, the Service Provider may dispose of the product as it sees fit, with no liability to you.
  7. Product Exchange ServiceUnder Product Exchange Service, Lenovo will ship a replacement product to your location. You are responsible for its installation and verification of its operation. The replacement product becomes your property in exchange for the failed product, which becomes the property of Lenovo. You must pack the failed product in the shipping carton in which you received the replacement product and return it to Lenovo. Transportation charges, both ways, shall be at Lenovo’s expense. If you fail to use the carton in which the replacement product was received, you may be responsible for any damage to the failed product occurring during shipment. You may be charged for the replacement product if Lenovo does not receive the failed product within thirty (30) days of your receipt of the replacement product.

Appendix C. Electronic emission notices

The following information refers to the ThinkPad USB 3.0 Secure Hard Drive.

Federal Communications Commission Declaration of ConformityThinkPad USB 3.0 Secure Hard Drive – 0A65616, 0A65619This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult an authorized dealer or service representative for help.

Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:Lenovo (United States) Incorporated1009 Think Place – Building OneMorrisville, NC 27560Phone Number: 919-294-5900

Industry Canada Class B emission compliance statementThis Class B digital apparatus complies with Canadian ICES-003.

European Union – Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers. This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices.

German Class B compliance statementLenovo product service information for TaiwanUkraine Compliance Mark

Appendix D. Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service.

Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc.1009 Think Place – Building OneMorrisville, NC 27560U.S.A.Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

TrademarksLenovo and ThinkPad are trademarks of Lenovo in the United States, other countries, or both. Microsoft and Windows are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.

Recycling informationLenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.com/recycling Recycling and disposal information for Japan is available at: http://www.lenovo.com/recycling/japan

Appendix E. Restriction of Hazardous Substances Directive (RoHS)

China RoHSThe information in the following table is applicable for products manufactured on or after March 1, 2007 for sale in the People’s Republic of China.Turkish statement of compliance

The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE).

Ukraine RoHS© Copyright Lenovo 2011, 2012ThinkPad USB 3.0 Secure Hard Drive User Guide

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by