levoit LV-H133 Tower True HEPA Air Purifier User Manual
Table of Contents
USER MANUALTower True HEPA Air PurifierModel: LV-H133
Questions or Concerns?If you have any questions or concerns, please reach out to us at [email protected]. We hope you enjoy your new air purifier!
Package Contents
x Air Purifier
x True HEPA Combination Filter (Pre-Installed)
x User Manual
Specifications
Power Supply
AC 220-240V, 50/60Hz
Rated Power
33W
Ideal Room Size
83 m² / 893 ft²Note: Effective for larger rooms, but purification will take longer.
Operating Conditions
Temperature:-10°–40°C / 14°–104°F
Noise Level
25–50dB
CADR (Clean Air Delivery Rate)
400 m³/h / 235 CFM
Standby Power
< 0.8W
Dimensions
31.8 x 31.8 x 60 cm / 12.5 x 12.5 x 23.6 in
Weight
6.75 kg / 14.9 lb
READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION
To reduce the risk of fire, electric shock, or another injury, follow all instructions and safety guidelines.
General Safety
Only use your air purifier as described in this manual.
Do not use your air purifier outdoors.
Keep your air purifier away from water, and wet or damp areas.Never place in water or other liquids.
Keep your air purifier away from heat sources.
Do not use where combustible gases, vapours, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
Keep 1.5 m / 5 ft away from where oxygen is being administered.
Supervise children when they are
near the air purifier.
Do not place anything into any opening on the air purifier.
Do not sit or place heavy objects on the air purifier.
Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes.
Always unplug your air purifier before servicing (for example, changing the filter).
Do not use your air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself.Contact Customer Support (see page 15).
WARNING: To reduce the risk of fire or electric shock, do not use this air purifier with solid-state speed controls (such as a dimmer switch).
Not for commercial use. Household use only.
Plug & Cord
Keep the air purifier near the outlet it is plugged into.
Never place the cord near any heat source.
Do not cover the cord with a rug, carpet, or other covering.Do not place the cord under furniture or appliances.
Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.
GETTING TO KNOW YOUR AIR PURIFIER
Function Diagram
A. LED Display / Control Panel
F. Air Quality Sensor
B. Air Outlet
G. Air Quality Sensor Cover
C. Housing
H. Filter
D. Power Cord
I. Filter Cover
E. Air Intake (triangles at the bottom)
LED Display
A. Fan Speed ButtonB. Auto Mode ButtonC. Sleep Mode ButtonD. Display Off ButtonE. Check Filter Indicator
F. Timer ButtonG. On/Off ButtonH. Air Quality IndicatorI. Timer DisplayJ. Fan Speed Indicator
CONTROLS
On/Off ButtonTurns the air purifier on/off.Fan Speed ButtonCycles through fan speeds: low, medium, and high.
Fan Speed indicator
Fan Speed
Low
Medium
High
Auto Mode ButtonTurns Auto Mode on/off (see page 7).
Sleep Mode ButtonTurns Sleep Mode on/off (see page 8).
Display Off Button
Turns the display off.
Press any button (except ) to turn the display back on.
Check Filter IndicatorLights up red to remind you to check the filter (see page 10).
Timer ButtonSets the timer (see page 8).
GETTING STARTED
Remove the filter cover. Pull the filter from the housing. [Figure 1.1]
Take the filter out of its plastic packaging, then reinstall it into the housing. Make sure the pull tabs on the filter are facing out. [Figure 1.2]
Replace the filter cover by lining up the cover’s feet with the slots in the bottom of the housing. [Figure 1.3]
Push the cover securely closed. [Figure 1.4]
Note:
If you are not planning to use the air purifier for a long period of time, keep the filter clean by leaving it inside its plastic packaging until it is ready to be used.
USING YOUR AIR PURIFIER
General Operation
. Place the air purifier on a level surface. [Figure 2.1] Leave 38 cm / 15 inches of clearance on all sides of the purifier. [Figure 2.2]
. Plugin. Tap to turn on the air purifier. The fan will start automatically.
. Optionally, tap to change the fan speed. You can also select Auto Mode or Sleep Mode, or set a timer.a. For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed for 15–20 minutes before using a lower speed or Auto Mode.b. To effectively clean air, keep windows and doors closed while the air purifier is on.
Tap to turn off the air purifier.
Auto ModeAuto Mode adjusts the fan speed automatically based on air quality. For example, if the air quality is bad, the fan will be set to high speed.
Tap to turn Auto Mode on/off.
Tapping or will also exit Auto Mode.
Air Quality Indicator Chart
IndicatorColour
Air Quality
Fan Speed
Blue
Very Good
Sleep Mode
Green
Good
Low
Orange
Moderate
Medium
Red
Bad
High
Air Quality IndicatorThis indicator uses an automatic sensor to display the air quality. This sensor uses infrared light to detect airborne particlesThe air purifier will take 30 seconds to detect the air quality each time it is turned on. During this time, the air quality indicator colour will be blue. After 30 seconds, the air quality indicator colour will change based on the detected air quality.
Sleep ModeSleep Mode uses the lowest possible fan speed to operate quietly.
Tap to turn Sleep Mode on/off.
Tapping or will also exit Sleep Mode.
TimerYou can set a timer between 1–12 hours.
Tap repeatedly (or press and hold ) to set a time.
Once you choose a time, the timer will flash 5 times and start counting down.
The air purifier will automatically power off once the timer is finished.
To cancel a timer, tap repeatedly until the timer reads “- – – -”. The timer will flash 5 times to confirm cancellation.
Note:
You can change the fan speed at any time while the timer is counting down. The timer will work with any mode.
Pressing or unplugging the air purifier will cancel the timer.
Memory FunctionThe air purifier will remember its programmed settings while turned off and resume those settings when turned back on. The air purifier must remain plugged in for the memory function to work.Note: The air purifier will not remember timers.
ABOUT THE FILTER
The True HEPA Combination Filter uses a 3-stage filtration system to purify the air.
A. Nylon Pre-Filter
Captures large particles such as dust, lint, fibres, hair, and pet fur.
Maximises the life of the True HEPA Filter by protecting it.
B. H13 True HEPA Filter
Removes at least 99.97% of airborne particles 0.3 micrometres (µm) in diameter.
Filters small particles such as mould spores, fine dust, smoke particles, and allergens such as pollen, dust mites, and pet dander.
C. High-Efficiency Activated Carbon Filter
Physically adsorbs smoke, odours, and fumes.
Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulphide, and volatile organic compounds (VOCs).
CARE & MAINTENANCE
Cleaning the Air Purifier
Wipe the outside of the air purifier with a dry cloth.Do not clean with water or any other liquid to avoid the risk of electric shock.
Clean the outside of the filter with a brush or vacuum hose each month to prevent the buildup of hair or dust. Do not clean the filter with water or other liquids.
Cleaning the Air Quality SensorIf the air quality sensor is blocked by accumulated dust, the air quality indicator may not work correctly.
Unplug the air purifier.
Open the sensor cover.
Clean the sensor lens with a damp cotton swab. [Figure 3.1]
Dry the sensor lens with a dry cotton swab.
Close the sensor cover.
Check Filter Indicator
will light up as a reminder to check the filter. The indicator is automatic. You may not need to change your filter yet, but you should check it when lights up.Resetting the Check Filter IndicatorReset the Check Filter Indicator when:
• lights up.
Replace the filter (see page 11).
Turn on the air purifier.
Press and hold for 3 seconds.
The light will turn off after the filter indicator is successfully reset.
• The filter was changed before lit up.
Press and hold for 3 seconds until lights up.
Press and hold again for 3 seconds.
The light will turn off after the filter indicator is successfully reset.
StorageIf not using the air purifier for an extended period of time, wrap the filter in plastic packaging and store it in a dry place to avoid moisture damage.
When Should I Replace the Filter?The filter should be replaced every 6–8 months. You may need to replace your filter earlier or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to change the filter more often, even if is off.
You may need to replace your filter if you notice:
Increased noise when the air purifier is on
Decreased airflow
Unusual odours
A visibly clogged filter
Note: To maintain the performance of your air purifier, only use official Levoit filters. You can purchase replacement filters from an authorized seller, or go to Amazon and search B07FXB5P8R.
Unplug the air purifier, then remove the filter cover. [Figure 4.1]
Remove the old filter. [Figure 4.2]
Clean any dust or dirt from inside the housing. [Figure 4.3]
Unwrap the new filter and place it into the housing. Make sure the pull tabs are facing out. [Figure 4.4]
Replace the filter cover with the housing. [Figure 4.5]
Plugin and turn on the air purifier. Press and hold for 3 seconds to reset it.
TROUBLESHOOTING
Problem
Possible Solution
An air purifier will not turn on or respond to button controls.
Plugin the air purifier.
Check to see if the power cord is damaged. If it is, stop using the air purifier and contact Customer Support (see page 15).
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer Support (see page 15).
The air purifier makes an unusual noise when the fan is on.
Make sure the filter is properly in place with plastic packaging removed (see page 6).
Replace the filter (see page 11).
An air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support (see page 15). Do not try to repair the air purifier.
Airflow is significantly reduced.
Make sure the filter’s plastic packaging is removed.
Tap to increases the fan speed.
Leave at least 38 cm / 15 inches of clearance on all sides of the air purifier.
Replace the filter (see page 11).
Poor air purification quality.
Tap to increase the fan speed.
Make sure no objects are blocking the top or sides of the air purifier for proper airflow.
Close doors and windows while running the air purifier.
Make sure the filter is removed from its plastic packaging and properly in place (see page 6).
If the room is larger than 83 m² / 893 ft², air purification will take longer. The air purifier may not be as effective in significantly larger rooms.
Replace the filter (see page 11).
The air purifier is producing an unpleasant odour.
Replace the filter (see page 11).
Make sure that the air purifier is in a room where the relative humidity is less than 85% RH. Higher humidity levels may cause mildew to grow on the filter.
Is still illuminated after replacing the filter.
Reset (see page 10).
has not turned on within 8 months.
is a reminder for you to check the filter and will light up based on how much the air purifier has been used (see page 10). If you don’t use your air purifier often, will take longer to turn on.
turned on before 6 months.
is a reminder for you to check the filter and will light up based on how much the air purifier has been used (see page 10). If you run your air purifier frequently, will turn it on sooner.
If your problem is not listed, please contact Customer Support (see page 15).
WARRANTY INFORMATION
Product Name
Tower True HEPA Air Purifier
Model
LV-H133
For your own reference, we strongly recommend that you record your order ID and date of purchase.
Date of Purchase
Order ID
Terms & PolicyArovast Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between product categories.If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
CUSTOMER SUPPORT
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.Arovast Corporation1202 N. Miller St., Suite A Anaheim, CA 92806 USAEmail: [email protected]*Please have your order invoice and order ID ready before contacting Customer Support.
levoit.comConnect with us @LevoitUKCA012221AC-M1_0121LV-H133_uk