levoit Vista 200-RXW True HEPA Air Purifier User Manual

USER MANUALTrue HEPA Air PurifierModel: Vista 200-RXW

Questions or Concerns?[email protected]

Thank you for purchasing theTRUE HEPA AIR PURIFIER BY LEVOIT.

If you have any questions or concerns, please reach out to us at [email protected].We hope you enjoy your new air purifier!

Find Us Online

Search for @LevoitUK on social media for tips, special deals, giveaways, inspiration, and more.

Package Contents

1 x Air Purifier2 x True HEPA Filters (1 Pre-Installed)1 x AC Power Adapter1 x Quick Start Guide1 x User Manual


Power Adapter Input: AC 100-240V, 50/60Hz, 0.5AOutput: DC 12V, 1.5A
Rated Power 15W
Effective Range < 15 m2 / 161 ft’
Operating Conditions Temperature: -10°-40°C / 14°-104°F
Humidity: < 85% RH
Noise Level 25-36dB
Standby Power < 0.5W
Dimensions 20 x 20 x 33 cm / 7.9 x 7.9 x 12.9 in
Weight 1.5 kg / 3.3 lb


To reduce the risk of fire, electric shock, or another injury, follow all instructions and safety guidelines.

General Safety

  • Only use your air purifier as described in this manual.
  • Do not use without removing the plastic wrap from the filter. The purifier will not filter air, and may overheat, causing a fire hazard.
  • Do not use your air purifier outdoors.
  • Keep your air purifier away from water, and wet or damp areas. Never place in water or liquid.
  • Do not use in excessively humid areas.
  • Keep your air purifier away from heat sources.
  • Do not use where combustible gases, vapours, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
  • Keep 1.5 m / 5 ft away from where oxygen is being administered.
  • Supervise children when they are near the air purifier.
  • Do not place anything into any opening on the air purifier.
  • Do not sit or place heavy objects on the air purifier.
  • Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
  • Always unplug your air purifier before servicing (such as changing the filter).
  • Do not use your air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (see page 14).
  • WARNING: Do not use this air purifier with solid-state speed controls (such as a dimmer switch).
  • Not for commercial use.Household use only.

AC Adapter & Cord

  • Keep air purifier near the outlet it is plugged into.
  • Never place the cord near any heat source.
  • Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
  • Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.



A. Fan Speed IndicatorsB. Fan Speed ButtonC. Sleep Mode Indicator/ButtonD. Timer ButtonE. Timer IndicatorsF. On/Off ButtonG. Night Light ButtonH. Check Filter IndicatorI. Display Off Button J. Air OutletK. HousingL. Air InletM. AC Power AdapterN. AC Power Adapter InputO. Filter Cover CapP. Filter CoverQ. True HEPA Filter


On/Off Button

  • Turns the air purifier on/off.

Fan Speed Button

  • Cycles through fan speeds:I (low), II (medium), and III (high).

Sleep Mode Button

  • Turns Sleep Mode on/off (see page 8).

Timer Button

  • Cycles through timer options (see page 8).

Night Light Button

  • Turns the night light on/off (see page 8).

Check Filter Indicator

  • Lights up when the filter should be checked (see Check Filter Indicator, page 10).

Display Off Button

  •  Turns the display off.
  • Tap any button (except ) to turn the display back on.


  1. Flip over the air purifier. Twist the filter cover cap anticlockwise to remove it and set it aside. [Figure 1.1]
  2.  Lift the filter cover off the purifier. [Figure 1.2]
  3. Remove the filter from its plastic packaging and place the filter back into the purifier. [Figure 1.3]Note: The filter does not have a top or bottom and can be installed either way.GETTING STARTED (CONT.)
  4. Replace the filter cover and the cap. Twist the cap clockwise to lock. [Figure 1.4]
  5. Place the purifier on a flat, stable surface with the display facing up. Allow at least 38 cm / 15 in of clearance on all sides of the purifier. Keep away from anything that would block air flow, such as curtains.[Figure 1.5]


  1. Connect the AC power adapter to the air purifier. Plug into an outlet.
  2. Tap to turn on the air purifier. The fan will start on level I.
  3. Optionally, tap to change fan speed between I, II, and III.Note:• The indicators are not buttons and cannot be used to change the fan speed.• The fan speed indicators will light up when activated.• Fan speed III is the loudest but cleans air the quickest.• For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (level III) for 15–20 minutes before using a lower speed.• To effectively clean air, keep windows and doors closed while the air purifier is on.
  4. Tap to turn off the air purifier.

Memory FunctionWhen the air purifier is plugged in, it will remember its previous fan speed setting.


Sleep Mode operates quietly by using the lowest possible fan speed.Tap to turn Sleep Mode on/off.


  • All indicators lower their brightness by ⅓ when Sleep Mode is on.
  • Tapping will exit Sleep Mode.

TimerYou can set a timer for 2, 4, or 8 hours.

  1. Tap repeatedly to select a time.Note:• The indicators are not buttons and cannot be used to select a time.• The timer indicators will light up blue when activated.
  2. The air purifier will automatically power off once the timer is finished.
  3. To cancel a timer, tap until all-timer indicators are off.


  • You can change the fan speed at any time while the timer is on.
  •  The timer will restart if it is changed.

Night LightUse 1 of 2 brightness levels.

  1. Tap once to turn on the light.
  2. Tap a second time to dim the brightness to half.
  3.  Tap a third time to turn off the light.


  • The night light can be used any time the air purifier is plugged in, even if it is not on.
  • The night light will remain on, even if you turn the display off.


The air purifier uses a 3-stage filtration system to purify the air.

A. Nylon Pre-Filter

  • Captures large particles such as dust, lint, fibres, hair, and pet fur.
  • Maximises the filter’s life.

B. True HEPA Filter

  • Removes at least 99.97% of airborne particles 0.3 micrometres (µm) in diameter.
  • Filters small particles such as smoke, tiny dust particles, mould spores, bacteria, viruses, and allergens such as pollen, dander, and mites.

C. High-Efficiency Activated Carbon Filter

  • Physically adsorbs unwanted odours and fumes.
  • Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulphide, and volatile organic compounds (VOCs).

ABOUT THE FILTER (CONT.)HumidityMoisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become mouldy.Note: Water or moisture will allow mould to grow. Air purifiers cannot solve an existing mould problem, only remove mould spores and reduce odours.

Essential OilsDo not add essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasantsmell. Do not use oil diffusers near the purifier.


Cleaning the Air Purifier

  • Unplug before cleaning.
  • Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
  • Vacuum the inside of the air purifier.
  • Do not clean with abrasive chemicals or flammable cleaning agents.

When Should I Replace the Filter?

The filter should be replaced every 6–8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off.You may need to replace your filter if you notice:

  • Increased noise when the air purifier is on
  • Decreased airflow
  • Unusual odours
  •  A visibly clogged filter

Note: To maintain the performance of your air purifier, only use official Levoit filters. To buy replacement filters, visit Levoit’s online store.Go to levoit.com for more information.

  • If your home has high air pollution, you may need to change your filter before lights up.
  • Remember to reset after changing the filter.

Check Filter Indicator will light up as a reminder to check the filter. Depending on how much you use the air purifier, the indicator should turn on within 6–8 months. You may not need to replace your filter yet, but you should check it when turns on.

Cleaning the FilterThe True HEPA Filter should be cleaned once a month to increase the efficiency and extend the life of your filter. Clean the inside and outside of the filter using a soft brush or vacuum hose to remove hair, dust, and large particles. Do not clean the filter with water or other liquids.

Resetting the Check Filter IndicatorReset the Check Filter Indicator when:A. lights up.

  1. Replace the filter.
  2. Turn on the air purifier.
  3. Press and hold for 3 seconds.
  4.  will turn off when successfully reset.

B. The filter was changed before lit up.

  1. Press and hold for 3 seconds.This will turn on .
  2. Press and hold again for 3 seconds.
  3.  will turn off when successfully reset.

CARE & MAINTENANCE (CONT.)Replacing the Filter

  1. Unplug the air purifier. Flip the air purifier over and remove the filter cover cap and filter cover (see Getting Started, page 6).
  2. Remove the old filter.
  3. Clean any remaining dust or hair inside the purifier using a vacuum hose. Do not use water or liquids to clean the purifier. [Figure 2.1]
  4. Unwrap the new filter and place it into the housing (see Getting Started, page 6).
  5. Replace the cover and cap. Plugin the air purifier.
  6. Reset the Check Filter Indicator.

StorageIf not using the air purifier for an extended period of time, wrap both the purifier and the filter in plastic packaging and store it in a dry place to avoid moisture damage.


Problem Possible Solution
An air purifier will not turn on or respond to button controls. Plugin the air purifier.
Disconnect the AC power adapter from the air purifier andreconnect it.
Check to see if the AC power adapter is damaged. If so, stop using the air purifier and contact Customer Support (see page 14).
Plug the air purifier into a different outlet.
An air purifier is malfunctioning. Contact Customer Support (see page 14).
Make sure the filter is removed from its packaging and properly in place (see page 6).
Tapto increases the fan speed.
Make sure there are at least 38 cm / 15 in of clearance on all sides of the air purifier.
Replace the filter (see page 11).
Air purifier makes an unusualnoise while the fan is on. Make sure the filter is properly in place with plastic packaging removed (see page 6).
Make sure the air purifier is operating on a hard, flat, even surface.
Replace the filter (see page 11).
The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support (see page 14). Do not try to repair the air purifier.
Poor air purification quality. Tap to increase the fan speed.
Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and properly in place (see page 6).
Close doors and windows while using the air purifier.
Make sure the room is smaller than 15 m² / 161 ft². The air purifier may not be as effective in larger rooms.
Replace the filter (see page 11).


Problem Possible Solution
Strange smell coming from the purifier. Clean the filter or replace if necessary.
Contact Customer Support (see page 14).
Make sure not to use your purifier in an area with high humidity or while diffusing essential oils.
is still on after replacing the filter. Reset the Check Filter Indicator (see page 10).
has not turned on within 8 months. is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 10). If you don’t use your air purifier often, will take longer to turn on.
turned on before 6 months. is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 10). If you run your air purifier frequently, will turn it on sooner.
Air does not flow evenly out of the air purifier. This is due to the design of the air purifier. This is normal and will not affect the air purifier’s efficiency.

If your problem is not listed, please contact Customer Support (see page 14).


Terms & PolicyProvost Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period.Warranty lengths may vary between product categories.If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.


If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.Provost Corporation1202 N. Miller St., Suite AAnaheim, CA 92806USA

Email: [email protected]* Please include your order ID when contacting Customer Support.


Connect with us @LevoitUK

report this ad



[xyz-ips snippet=”download-snippet”]