Lexi Wall Hung and Floor Mount User Guide
Features
- Wall Hung and Floor Mount
- 304 grade stainless steel frame, fabricated in Australia and finished in Matte Black or Matte White powdercoat
- ADP Deluxe soft-close drawers in Graphite with LED illuminated glass sides
- Premium graphite interior, soft-close doors.
Cabinet Finish Options
- Woodgrain
- PolyurethaneSee page 36 for finishes
Metal Frame Finish Options
- Matte Black powdercoat
- Matte White powdercoat
20mm Benchtop Options
- Cherry Pie Premium Solid Surface
- Friday Hybrid Quartz
- Caesarstone (additional charges apply)See page 42 for finishes
- Universal Plug & Waste included
- 3L Bin included
- Australian Made
Handle Options
Point KnobsBrushed Nickel, Matte Black, Brushed Brass
Reign KnobsBrushed Nickel, Matte Black, Brushed Brass
Loop Leather PullBlack or Tan
Margot Basin (Included)
For codes and specifications see page 56
- Matte or Gloss White
- Matte Black
- Matte White Inside, Matte Black Outisde
- Matte Black Inside, Matte White Outisde
- Matte White Inside, Matte Grey Outisde
- Matte White Inside, Matte Pink Outisde
Configurations – Wall Hung
For codes and specifications see page 50
- 600 Centre Bowl
- 750 Centre/Offset Bowl
- 900 Centre/Offset Bowl
- 1200 Centre/Offset Bowl
Configurations – Floor Mount
For codes and specifications see page 50
- 600 Centre Bowl
- 750 Centre/Offset Bow
- 900 Centre/Offset Bowl
- 1200 Centre/Offset Bowl
Product Specifications
Lexi Wall Hung
- 600 CentreLEXFDW0600WHC
- 750 CentreLEXFDW0750WHC
- 750 OffsetLEXFDW0750WHLLEXFDW0750WHR
- End View
- 900 CentreLEXFDW0900WHC
- 900 OffsetLEXFDW0900WHLLEXFDW0900WHR
- 1200 Centre/OffsetLEXFDW1200WHCLEXFDW1200WHLLEXFDW1200WHR
- 600 CentreLEXFDW0600FMC
- 750 CentreLEXFDW0750FMC
- 750 OffsetLEXFDW0750FMLLEXFDW0750FMR
- End View
- 900 CentreLEXFDW0900FMC
- 900 OffsetLEXFDW0900FMLLEXFDW0900FMR
- 1200 Centre/OffsetLEXFDW1200FMLLEXFDW1200FMCLEXFDW1200FMR
Hudson
Holly Wall Hung
Basin Specifications
Margot
Features
- Above-Counter
- Ceramic
- 9L Capacity
- No overflow
- Suits a 32mm waste
Finishes
- Matte WhiteTOPCMAR360MW
- Gloss WhiteTOPCMAR360GW
- Matte BlackTOPCMAR360MB
- Matte Black Outside/ Matte White InsideTOPCMAR360BW
- Matte White Outside/ Matte Black InsideTOPCMAR360WB
- Matte Grey Outside/ Matte White InsideTOPCMAR360DGW
- Matte Pink Outside/ Matte White InsideTOPCMAR360DPW
Joy
Features
- Semi-Inset
- Solid Surface
- 3L Capacity
- No overflow
- Suits a 32mm waste
Finishes
- Matte WhiteTOPSJOY2819WM
- Gloss WhiteTOPSJOY2819WG
WARRANTY
NOTE: Unless otherwise stated warranties for ADP products are as follows:
PRODUCT | DOMESTIC W ARRANTY | COMMERCIAL W ARRANTY |
Cabinets – Vanities, Tallboys & Ensembles, Shaving Cabinets (excluding mirror) | 10 years | 1 year |
Cherry Pie / Friday Hybrid Quartz / Caesarstone benchtops | 10 years | 1 year |
Acrylic Tops / Cast Marble Tops / Solid Surface Tops | 7 years | 1 year |
Ceramic Moulded Tops | 5 years | 1 year |
Solid Surface Basins | 7 years | 1 year |
Ceramic Basins | 1 year | 1 year |
Baths | 7 years | 1 year |
Mirrors (including mirrored surfaces on cabinets) | 1 year | 1 year |
Hardware | 7 years | 1 year |
Electrical / Lighting / Plumbing Fittings | 1 year | 1 year |
Tapware |
||
Cartridge | 15 years | 1 year |
Body (against manufacturing faults and flaking) | 7 years | 1 year |
Martini Ritz body (against faults and flaking) | 1 year | 1 year |
Parts and Labour | 2 years | 1 year |
Bathroom Accessories | 7 years | 1 year |
Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure upon inspection by an authorised representative where a product is found to be defective in construction, material or assembly. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure, free of charge.
CONDITIONS
- Items must be installed by a licensed tradesperson.
- Failure is due to a fault in the manufacture of the product.
- Proof of purchase is provided.
- The installation of the product is in accordance with the instructions provided.
EXCLUSIONSTo the fullest extent permitted by law, the manufacturer excludes all liability for damage or injury to any person, damage to any property and any indirect consequential or other loss or damage. Manufacturer will not be liable for the cost of installation or removal of any unit and the warranty will be VOIDED if damage occurred during or after INSTALLATION or a damaged or incorrect unit has been installed. Door and drawer adjustment; Unsuitable or improper use; Incorrect installation or installation not in accordance with the instructions provided; Installation or part installation by the purchaser or any person other than a LICENSED tradesperson; Normal wear and tear; Inadequate or complete lack of maintenance; chemical, electrochemical or electrical influences; excessive heat damage or Harsh detergents or abrasive cleaners used on product finishes, are NOT considered a warranty issue. Acrylic, Ceramic, Solid Surface and Bamboo basins and tops have a maximum water temperature of 65°C, Cast Marble has a maximum water temperature of 70°C, water temperatures above this will void warranty.
CLAIM PROCEDUREFor all warranty queries customers are to contact the branch where the product was purchased. These details can be found on your purchase invoice.
AN IMPORTANT NOTE ON BATHROOM VENTILATION
Good ventilation will save you thousands of dollars and keep your family healthy – mould can be a huge problem in bathrooms if they’re not properly ventilated.
Moisture can be the root of all wet area products breaking down and failing, in particular your vanity and mirror. These products are usually water resistant not waterproof so it’s important moisture does not build up which will mean your products will last longer, saving you money. Good ventilation is also key to achieve lower humidity in the room which will minimise bacteria growth and prevent mould and mildew. You’ll have less mildew on your grout, walls and ceilings, and fewer mould spores to threaten your respiratory health.
Signs of poor ventilation include black spotting on mirrors, paint starting to flake on the ceiling, bubbling of paint coatings on fixtures, and furniture swelling. Evidence of mould or mildew is also a good indicator that your ventilation is not adequate.
The best sign that your ventilation is sufficient is that the mirror doesn’t steam up and the tiled walls aren’t wet. The best way to achieve this is to have a good exhaust fan that is correctly sized for the space, to do this you need approximately 50 cfm per toilet and 50cfm per shower or bath. Run the fan every time water is being used in the bathroom and run it for around 15 minutes after you shower. If you have a bathroom window, opening that daily (even in the chilly winter months) in addition to using the exhaust fan will help to keep your bathroom fresh and mould-free.
References
[xyz-ips snippet=”download-snippet”]