Please read this manual carefully before operating your set and retain it for future reference. o view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.
MODELSN10Y
Front Panel
(Standby)
Switches the unit ON or OFF.
F (Function)
Selects function.
-/+(Volume)
Adjusts volume.
(Wi-Fi)
Selects Wi-Fi function.
Reset the UnitPress and hold the on the unit until you hear the beep sound once.
Rear Panel
USB (Service only)
S/W download connector.
OPTICAL IN
Connect to an optical device.
HDMI OUT (TV eARC/ARC)
Connect to a TV.
HDMI IN (1) / HDMI IN (2)
Connect to device with HDMI OUT.
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Subwoofer Connection
Place the wireless subwoofer near the soundbar and follow the steps below.
Connect the power cord of the soundbar and the wireless subwoofer to the outlet.
Turn on the soundbar.• The soundbar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.
Manually Subwoofer ConnectionIf the subwoofer does not make a sound, try to connect manually.
Press Pairing on the rear of the wireless subwoofer.• The green LED on the rear of the wireless subwoofer blinks quickly.(If the green LED does not blink, press and hold the Pairing.)
Turn on the soundbar.• Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Keep the soundbar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference
TV Connection
Connect the soundbar and TV using Optical ( A) or HDMI ARC (B).
A Optical Connection
Connect the soundbar to the TV using an Optical cable.
Set up [External Speaker (Optical)] on your TV setting menu.
A HDMI (TV eARC/ARC) Connection
Connect the soundbar to the TV using an HDMI cable.
Set up [External Speaker (HDMI ARC)] on your TV setting menu.
HDMI connection is unavailable if your TV does not support HDMI ARC.
If this unit is connected by OPTICAL and ARC at the same time, the ARC signal has a higher priority.
Additional Device Connection
Connect to the external device as follow.
Set the input source by pressing F repeatedly.
Network Connection
Check network condition. A router connected to the network should be installed.
Connect your smart device to your home network.
Connect the soundbar to the power supply.
All devices should be connected to the same router.
Step.1 Install “Google Home” AppDownload the Google Home App from the Google Play or App Store.Step.2 Set up the Wi-Fi connection with the app
Connect your smart device to the Wi-Fi network that you’ll use for your unit.In the case of iOS devices, it should be turned on Bluetooth setting on your smart device.
Launch the “Google Home” app.
Follow the steps for Wi-Fi connection on the app.• When the unit is properly connected to Wi-Fi, “CONNECTED” will appear on the display window with sound.
• When connect to Wi-Fi, this app may request to create a Google Account. You will need a Google account to use this app.• “Google Home” app is provided by Google. It might be revised by a change of Google Policy.
Remote control
Replacement of Battery
SOUND EFFECT: Selects a sound effect mode.– TV remote: Long press SOUND EFFECT and press it again to use the TV remote control.Turns on or off the Night-time mode. Displays the information of a file, an input source, a connected Bluetooth device name or an application name.– Auto Power ON/OFF: Long pressand press it again.
: Adjusts sound level of each speaker.– Surround sound: Long press and press itagain.*: This button is not available.
Additional
Download LG Sound Bar ApplicationYou can manage the speaker settings and control the speaker by using “LG Sound Bar”.Download “LG Sound Bar” on the App Store or Google Play Store.
AI Room calibrationAI Room Calibration is a sound tuning tool, which adjusts the audio settings of the Sound Bar based on the room acoustics and environment.To access the AI Room Calibration it is necessary to install the “LG Sound Bar” app. On the [Sound Setting] menu, choose [AI Room Calibration].
Additional Information
Specification
Power requirements
Refer to the main label.
Power consumption
Refer to the main label.
Networked standby: 6.5 W(If all network ports are activated.)
Dimensions (W x H x D)
Approx.1443.0 mm x 63.0 mm x146.0 mm (with foot)
Amplifier (Total RMS Output power)
570 W RMS
Design and specifications are subject to change without notice.
Rear Speakers ReadyReady for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
To enjoy content containing Dolby Atmos® and DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.
How to disconnect the wireless network connection or the wireless device
Turn off the unit by pressing the power button for more than 3 seconds.
OPEN-SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that are contained in this product, please visit http://opensource.lge.com.In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download.LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost ofmedia, shipping, and handling) upon email request to [email protected].This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type Wi-Fi SOUNDBAR is in compliance with Directive 2014/53/EU. The full text of the EUdeclaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#For the consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.