LG SN5Y Wireless Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.
Box Contents
Front Panel
1 (Standby) | Switches the unit ON or OFF |
F (Function) | Selects function. |
p/o (Volume) | Adjusts volume. |
Rear Panel
DC IN | Connect to the AC adapter. |
OPTICAL IN | Connect to an optical device. |
HDMI IN | Connect to device with HDMI OUT |
HDMI OUT (TV ARC) | Connect to a TV |
USB Port | Connect to a USB device. |
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack. |
Subwoofer Connection
Place the wireless subwoofer near the sound bar and follow steps below.
- Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
- Turn on the sound bar.• The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.
Manual Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.
- Press PAIRING on the rear of the wireless subwoofer.• The green LED on the rear of the wireless subwoofer blinks quickly.(If the green LED does not blink, press and hold the PAIRING. )
- Turn on the sound bar.• Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference. |
TV Connection
Connect the sound bar and TV using Optical () or HDMI ARC (
- Connect the sound bar to the TV using Optical cable.
- Set up [External Speaker (Optical)] on your TV setting menu.
- Connect the sound bar to the TV using HDMI cable.
- Set up [External Speaker (HDMI ARC)] on your TV setting menu.
|
Additional Device Connection
- Connect to the external device like as follow.
- Set the input source by pressing F repeatedly.
Remote control
Additional Information
Specification
Power consumption | Refer to the main label. |
AC adapter |
|
|
|
Dimensions (W x H x D) | Approx.890.0 mm X 57.0 mm X85.0 mm With foot |
Bus Power Supply (USB) | 5 V |
Amplifier (Total RMS Output power) | 400 W RMS |
Design and specifications are subject to change without notice.
Rear Speakers ReadyReady for surround sound with Rear Speakers Kit sold separately. (SPK8-S) |
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
References
LG Open Source
LG: TVs, Home Entertainment & Kitchen Appliances | LG USA
LG: TVs, Home Entertainment & Kitchen Appliances | LG USA
LG Open Source
/index.html
Call2Recycle® | Canada
opensource.lge.com/license/curl.html
reference.To
opensource.lge.com/license/FTL.html
opensource.lge.com/license/Zlib.html
Call2Recycle | United States
opensource.lge.com/license/BSD-3-Clause.html
opensource.lge.com/license/MIT.html
opensource.lge.com/license/OpenSSL.html
[xyz-ips snippet=”download-snippet”]