![]()
200m Fibre Optic Display Port 1.2 Extender
ExtenderUser ManualNo. 38403lindy.com© LINDY Group FOURTH EDITION (January 2021)
ENGLISH Security Remarks
For safety purposes you must not rebuild or modify the power supply. Improper use can cause hazards, for which we assume no liability. Read this manual carefully and retain it for future reference. Insert the required country plug into the adapter. The plugs are keyed to avoid incorrect insertion. Push the adapter firmly towards the housing, push it down and allow the latch on the power supply to click into place. To remove, slide the locking button to the back. Make sure the plug is locked firmly in place before use. Never insert the plug separately into a mains socket!
Introduction
Thank you for purchasing this DisplayPort 1.2 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This fibre optic extender allows you to transmit DisplayPort signals with the full resolution of up to 3840 x , including MST, and with DPCP (DP Content Protection) without compression or loss of quality up to 200m/600feet using a single MPO Fibre cable.
Features & Specifications
- Extends DisplayPort signals over MPO Fibre Cable (12 core, 1:1, Method A)
- Compatible with DisplayPort 1.2 specification, supports digital audio
- Supports resolutions up to 4K 60Hz (3840 x 2160p @ 60Hz) and above
- Supports MST and HBR3 (up to 5.4GBit/s. per lane)
- Supports DPCP (DisplayPort Content Protection)
- Supports connection of DisplayPort MST Hubs (Expander View Splitter), HDMI, DVI and VGA equipment using compliant adapters.
- Maximum DisplayPort cable length up to 5m in and out
Package Contents
- LINDY Fibre Optic DisplayPort Extender x 2 (1x Transmitter, 1x Receiver)
- 2x Multi-Country wall mount power supply 100 – 240VAC / 5V DC
- This User Manual
Installation and Operation
Important! Do not bend the MPO fibre cable beyond its maximum bend radius and ensure the connectors are protected from dust. Keep the dust covers in a secure place for later use!
- Use DisplayPort cables ( 5m) to connect your DisplayPort source to the Transmitter and DisplayPort sink (monitor, splitter, converter,) to the Receiver.
- Remove the dust covers from the MPO fibre connectors and connect them to the Transmitter and Receiver. Please ensure that the connectors snap into place before proceeding.
- Plug the power supplies into the transmitter and receiver and power on all your devices starting from the sink (monitor).
- All LEDs on Transmitter and Receiver should be lit.a. If this is not the case ensure that all connectors are fully engaged!b. If the power LED is not lit the Transmitter or Receiver isn’t powered up or faultyc. If the Source LED is not lit the connection to the source is not established correctlyd. If the Sink LED is not lit the connection to the Sink device is not established correctlye. If the Fiber LED is not lit the fiber connection between Transmitter and Receiver is not working. Try to exchange the LC plugs with each other at either Transmitter or Receiver. If this doesn’t help check if the fiber cable is broken or has a kink and replace it.
- If none of this helps try shorter DisplayPort cables.
CE/FCC StatementCE Certification
This equipment complies with the requirements relating to Electromagnetic Compatibility Standards. It has been manufactured under the scope of RoHS compliance.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Hersteller / Manufacturer (EU):.LINDY-Elektronik GmbH Markircher Str. 20 68229 Mannheim Germany Email: , T: +49 (0)621 470050
LINDY Electronics Ltd Sadler Forster Way Stockton-on-Tees, TS17 9JY England , T: +44 (0)1642 754000
Recycling InformationWEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United KingdomIn 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Tested to comply with FCC Standards For Home and Office Use!
No. 38403 4th Edition, January 2021lindy.com
References
[xyz-ips snippet=”download-snippet”]