LINDY 38158 2 & 4 Port HDMI 10.2G Splitter User Manual

2 & 4 Port HDMI 10.2G SplitterUser Manual

No.38158,38159lindy.com

© LINDY Group – SECOND EDITION (January 2021)

Safety Instructions

! WARNING!Please read the following safety information carefully and always keep this document with the product.Failure to follow these precautions can result in serious injuries or death from electric shock, fire, or damage to the product.Touching the internal components or a damaged cable may cause electric shock, which may result in death.This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type, and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing it into a power socket.To reduce risk of fire, electric shocks, or damage:

• Do not open the product nor its power supply. There are no user-serviceable parts inside.
• Only qualified servicing personnel may carry out any repairs or maintenance.
• Never use damaged cables.
• Do not expose the product to water or places of moisture.
• Do not use this product outdoors it is intended for indoor use only.
• Do not place the product near direct heat sources. Always place it in a well-ventilated place.
• Do not place heavy items on the product or the cables.
• Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

Push the button and rotate anticlockwise to unlock and remove the adapter. To attach, push and rotate clockwise until the adapter is locked into place.

Introduction

Thank you for purchasing the 2 or 4 Port HDMI 10.2G Splitter. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.The Lindy 2 & 4 Port HDMI 10.2G splitter is a low-cost, compact solution for distributing high-quality 4K Ultra HD across two or four displays from a single source device.

Package Contents

• 2 / 4 Port HDMI 10.2G Splitter
• 5VDC 1A Multi-Country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm
• Lindy Manual

Features

• Supports resolutions up to 3840× 4:4:4 8bit
• Supports HDMI digital audio pass-through up to 7.1CH
• CEC Pass-through on HDMI Out 1
• EDID Management Dipswitch

Specification

• Interface Standard: HDMI 1.4 10.2G
• Maximum Resolution: 3840× 4:2:0 8bit, 3840× 4:4:4 8bit
• HDCP Support: 1.4
• Operating Temperature: 0°C – 40°C (32°F – 104°F)
• Storage Temperature: -20°C – 60°C (-4°F – 140°F)
• Humidity: 20 ~ 90% RH (Non-condensing)
• Black, metal housing

Installation & Operation

Please ensure all devices are switched off before connecting any source devices or displays. Connect a source device to the input port of the HDMI splitter, then connect displays to the HDMI output ports.Once all connections are made please switch on the devices in the following order: Displays, HDMI Splitter, Source Device.

EDID Management

Please Note: The splitter must be restarted when any EDID changes are made.38158 – Copy/Auto

• Auto – Scans both outputs and chooses the highest EDID settings compatible with both screens.
• Copy – Copy the EDID of HDMI Out 1.

38159

CE/FCC Statement

CE CertificationLINDY declares that this equipment complies with relevant European CE requirements.UKCA CertificationLINDY declares that this equipment complies with relevant UKCA requirements.FCC CertificationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the International Standard IEC 60950-1 or 60065 or 62368-1.

report this ad

Hersteller / Manufacturer (EU):LINDY-Elektronik GmbHMarkircher Str. 2068229 MannheimGermanyEmail: [email protected] , T: +49 (0)621 470050Manufacturer (UK):LINDY Electronics LtdSadler Forster WayStockton-on-Tees, TS17 9JYEngland[email protected], T: +44 (0)1642 754000

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic ProductsEurope, United KingdomIn 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

Tested to comply with FCC standards.For home and office use.No. 38158-92nd Edition, January 2021lindy.com

References

• 
  Lindy Electronics