2 Port HDMI 2.0 18G Splitter with AudioUser Manual
No. 38230lindy.com
Introduction
Thank you for purchasing the 2 Port HDMI 2.0 18G Splitter with Audio. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.This splitter is a multi-function solution for distributing high-quality HDMI signals across 2 displays simultaneously from one source device while extracting digital or analogue audio separately. The splitter also features an integrated switch to downscale the input signal to Full HD, making installations with older displays hassle free while always ensuring the viewer receives the optimum picture from their display.
Package Contents
- HDMI Splitter
- 5VDC 1A Multi-country Power Supply (UK, EU, US & AUS), 5.5/2.1mm Barrel Size
- This manual
Features
- HDMI 2.0 18G, HDCP 2.2 Compliant
- Supports resolution up to 3840× 4:4:4 8bit, with support for HDR
- Extract Toslink (Optical) and 3.5mm Stereo audio from HDMI
- Downscale resolutions via integrated dipswitch
Specification
- Input: HDMI Type A (Female), Output: 2 x HDMI Type A (Female), 3.5mm Audio (Female), Toslink (Optical) (Female)
- Metal Housing
- Operating Temperature: 0°C – 40°C (32°F – 104°F)
- Storage Temperature: -20°C – 60°C (-4°F – 140°F)
- Humidity: 20-90% RH (non-condensing)
- Power Requirements: 5V DC 1A
InstallationPlease ensure all devices are switched off before making any connections. Once all the connections have been made, switch on the devices in this order: displays, HDMI Splitter, source device.Connect the source device to the HDMI splitter’s input port. Then connect the displays to the HDMI splitter’s output ports. When all the connections are made, connect the power supply and switch it on.
Operation
Front Panel
Number |
Name |
Function |
1 |
Power LED | This LED will illuminate blue when the unit is connected to the power supply |
2 |
HDMI Input
LED |
This LED will illuminate blue when an HDMI source device is connected and active |
3 |
HDMI
Output LEDs |
These LEDs will illuminate blue when an HDMI display is connected and active |
4 |
Service | For Firmware Updates |
5 |
EDID Switch |
AUTO: Compares both displays EDID settings and outputs the most suitable and highest resolution possible of both displays COPY: Copies the EDID of Output 1’s display, This resolution will then be sent to both displays. |
6 |
Downscaling Switch |
OFF: The signal passes straight through to both outputs ON: The signals downscales from 4K to 1080p, for use with displays with a maximum resolution of 1080p. |
Please note: EDID switch should be set to Copy for 4K resolutions to then downscale each port to 1920x1080p.Rear Panel
Number | Name | Function |
1 | HDMI Outputs | Connect to an HDMI display |
2 | Optical Output | Connect to Toslink (Optical) audio devices for audio extraction |
3 | L/R Output | Connect to 3.5mm Stereo audio devices for audio extraction |
4 | HDMI In | Connect to an HDMI source device |
5 | DC 5V | Connect the 5VDC 1A Multi-country power supply |
Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic ProductsEurope, United KingdomIn 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Tested to comply withFCC StandardsFor Home and Office Use!No.38230 2nd Edition, January 2021lindy.com
References
[xyz-ips snippet=”download-snippet”]