LINDY 38320-6 Fibre Optic Hybrid Micro-HDMI 2.0 18G Cable
Introduction
Thank you for purchasing from the Fibre Optic Hybrid Micro-HDMI 2.0 18G Cable with Detachable HDMI & DVI Connectors range. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. Lindy’s range of Fibre Optic Hybrid Micro-HDMI 2.0 18G Cables with detachable connectors are the professional solution for extending Micro-HDMI, HDMI & DVI signals over longer distances, with no requirement for additional adapters.
Package Contents
- Micro-HDMI Fibre Optic Hybrid Cable
- 2 x Micro-HDMI to HDMI Connectors
- 2 x Micro-HDMI to DVI-D Connectors
- USB Micro-B DC Cable (optional)
- Cable Pulling Tool
Features
- Supports HDMI resolutions up to 3840× 4:4:4 8bit, with additional support HDR
- Supports DVI-D resolutions up to 1920× ( resolutions are possible if using HDMI signalling on the DVI connector)
- Reduced EMI and RFI
- Supports CEC, HDCP 2.2
Specification
- Power Requirements (only required if source device cannot provide sufficient power): 5V
- Operating Temperature: 0°C – 50°C (32°F – 122°F)
- Storage Temperature: -40°C – 70°C (-40°F – 158°F)
- Humidity:10-80% RH (non-condensing)
- Cable Type: Fibre Optic Hybrid (OM3 Fibre & Copper)
- Jacket Diameter: 6mm (0.24in)
- Jacket Material: PVC
- Colour: Black
- Power Consumption: 250mW
Installation
Position the Micro-HDMI connector inside the pulling tool and close the cover. Attach the cable tie to the pulling tool and carefully pull from the display side. This will be indicated on the connector head shell. Once installed please attach the required DVI or HDMI connector and connect to the source and display. Switch on the source and display.
CE/FCC Statement
CE CertificationThis equipment complies with the requirements relating to Electromagnetic Compatibility Standards. It has been manufactured under the scope of RoHS compliance.
FCC CertificationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products Europe, United KingdomIn 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Hersteller / Manufacturer (EU):.LINDY-Elektronik GmbHMarkircher Str. 2068229 MannheimGermanyEmail: [email protected],T: +49 (0)621 470050
LINDY Electronics LtdSadler Forster WayStockton-on-Tees, TS17 9JYEngland[email protected] ,T: +44 (0)1642 754000
References
[xyz-ips snippet=”download-snippet”]