Linocell 23846 Wireless Kids Headphone User Manual
Overview
Specification
| Bluetooth Version | 5.0 |
| Sensitivity: | 8513d8/1 mw1S.P.L at 1K1-1z) |
| Listening frequency: | 20 Hz – 20 kHz |
| Wireless frequency: | 2402.2480 MHz |
| Transmission power: | 20 mW (max) |
| Charging input: | 5 V, 300 mA |
| Charge time: | 2 h |
| Battery time: | Up to 20 h |
| Range: | Up to 10m |
| Charging cable: | Micro-USB |
| Charging cable length: | 20 cm |
| Audio cable length: | 120 cm |
| Weight: | 86.5 g |
Use
Power on/offTo turn on the headphones, press and hold the Multifunction button until the status indicator blinks blue. To turn off the headphones, press and hold the Multifunctional button again until the status indicator blinks red.ChargingConnect the USB cable to the charging port and a computer or a USB power adapter. The status indicator is red during charging and turns off when the battery is fully charged. The status indicator blinks red if the battery level is low. Note: The head-phones turn off when connected to a charging source.
PairingMake sure the headphones are turned off. Press and hold the Multifunctional button for 5 seconds to enter pairing mode. The status indicator blinks blue and red. Turn on Bluetooth on your device and search for “BTH-70”, select it when found. If necessary, enter the password “0000” to pair and connect the headphones. Some devices also ask to confirm the headset connection after pairing. The status indicator blinks blue after the pairing is successful. If no Bluetooth devices are paired within 5 minutes the headphones turn off.
General functionsChange the volume with the Volume + and Volume – buttons. You can also skip to the next track or go to the previous one by holding in the corresponding button. Play or pause the current track by pressing the Multifunctional button. To answer or end a call, press the Multifunctional button. Press and hold it for at least 2 seconds to reject an incoming call. Double-click it to redial the last call.Note: The functions of the buttons may not always be the same for all devices and brands.
AUX cableIf the battery level of the headphones is low, you can listen to music withthe AUX ca-ble instead. Connect the AUX cable to the headphones and your device with a 3.5 mm audio port to listen to music wired. The control buttons do not work with the cable.
[xyz-ips snippet=”download-snippet”]