Quick Start Guide
Never push the Litter-Robot against a wall or into a corner (must not be touching any walls).Cats must weigh at least 5 lbs. to safely use the Litter-Robot in Automatic Mode.
https://support-litter-robot.force.com/s/article/Getting-Started-with-your-Litter-Robot-3 For a complete guided online experience and tips on acclimating your cat, please scan the OR code or visit litter-robot.com/gettingstarted • If possible, place the Litter-Robot in the same location as the old litter box (at least during transition).• Make sure the unit is indoors on a firm, level surface and in a cool, dry location.• Place litter mats or rugs in front of, or completely under, the unit. Do not place mats partially under the unit. Use only low pile (1/4 inch) mats or rugs under the unit. 
• Use clumping litter or litter beads and crystals that are small enough to pass through the screen.• Add litter until it meets the raised fill line when spread flat (about 8-10 pounds). Be careful not to overfill.• Insert the small plug end of the power cord into the socket on the back of the base.• Plug the AC/DC adapter into a wall outlet.• Press the Power button on the control panel.The Litter-Robot will now perform an initial clean cycle.
Litter-Robot Connect units only – look for the WiFi symbol on the control panel. Download the AutoPets Connect app and follow the onboarding instructions.Need help? Visit litter-robot.com/help
References
[xyz-ips snippet=”download-snippet”]