LOEWE BILD 5.65 65 Inch 4K UHD OLED TV Monitor Instruction Manual

LOEWE BILD 5.65 65 Inch 4K UHD OLED TV Monitor

Introduction

Many thanksfor choosing Loewe and placing your trust in us.By opting for Loewe, you have not only chosen a modern and technically innovative television, but also gone for timeless design, razor-sharp picture quality, brilliant sound for film and music enjoyment as well as intuitive operation with the Loewe remote control, smart phone or tablet.In short: Loewe stands for optimal home entertainment.We wish you much pleasure with Premium Home Entertainment from Loewe and we are glad to have you as a customer.With the aim of a safe and long-term fault-free use of the set, before putting the TV set into operation, please read the chapter Safety/

Delivery specification

  • TV set
  • Instruction manual 1
  • Rotation unit (only with set variant)
  • Table stand base plate (only with set variant)
  • Welcome Box:
    • Remote control assist with two alkaline batteries type AAA
    • Mains cable
    • Operating instructions 2 (these instructions)
    • Table stand mounting instructions (only on set variants)
    • Velcro cable ties
    • Screws for assembly option (only with set variants)
    • Tool set for mounting of the installation option

Documentation

This part of the operating manual contains essential basic information.The device is commissioned and set up by means of the intuitive operation guide after the device has been switched on for the first time.A detailed user handbook describing the functions and features of your new Loewe set can be downloaded in electronic form from the Loewe website.

The user handbook is updated regulary.Please find a detailled user handbook here: https://my.loewe.tv/manuals/bild

Visit our homepage under: www.loewe.tv/int/supportIn this section, you will also find the FAQs – frequently asked questions.

Official web forum: www.loewe-friends.de

Position of the rating plateLabels with model number and operating voltage can be found on the back of the TV set or on the packaging.

Safety/Warning

For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below.

Do not remove set rear panelWarning: When opening or removing the rear panel, there is the danger of electric shock and the risk of serious injury from high voltages.

ATTENTION: ELECTRIC SHOCK DANGER– DO NOT OPEN

Never open the rear panel yourself. Leave repairs and servicing work on your TV set to qualified, authorised television technicians.Please contact your dealer or our customer service.

Intended use and environmental conditions

  • This TV set is intended exclusively for the reception and playback of picture and sound signals.
  • The TV set is designed for dry rooms (living rooms and office spaces). It must not be used in rooms with a high level of humidity (e.g. bathroom, sauna) or outdoors.
  • When using the set, make sure that it is protected from moisture (dripping and splashing water or condensation).
  • High humidity and dust concentrations lead to power leaks in the set. This can lead to danger of injury and damage to the set by electric tensions or a fire.
  • If you’ve brought the set from the cold into a warm environment, leave it off for around an hour due to the formation of condensation.
  • Do not place objects filled with liquid on the set. Protect the set from dripping and splashing water.Candles and other open flames must be kept away from the set at all times to pre vent the fire from spreading.
  • The materials we used in this device comply with all regulatory requirements. However, the migration of substances cannot be ruled out. We therefore suggest you avoid permanent contact between food and the TV set.

Transport

  • Improper handling during transportation can lead to damage to the display and risks of injury.
  • The screen consists of glass or plastic and can break if handled improperly.
  • At least two people are required to transport the set. Only transport the set in a vertical position.
  • No pressure should be applied to the glass or the plastic during transport.
  • The correct unpacking of the set is shown in the operating manual 1.

Mains cable/power supply

  • Immediately pull out the mains power plug from the mains socket if you detect something unusual.
  • Incorrect voltages can damage the set.
  • This set may only be connected to a mains power supply with the voltage and frequency indicated on the rating plate using the enclosed mains cable.
  • The mains power plug of the TV set must be easily accessible so that the set can be disconnected from the mains at any time.
  • When pulling the mains power plug out, do not pull the cable but the plug housing. The cables in the mains power plug could be damaged and cause a short circuit when plugged in again.
  • A mains power cable with a damaged insulation can lead to electric shock and presents a fire hazard. Never use a damaged mains cable.
  • Lay the mains cables so that they cannot be damaged. Do not tread on the mains cable.
  • The mains cable must not be kinked or laid over sharp edges.
  • If you use a portable multiple socket to connect the TV set, do not cascade several multiple sockets consecutively.

Air circulation and high temperaturesLike any electronic device, your TV set requires air for cooling. If air circulation is impeded, it may result in a fire.

The ventilation slots on the rear panel of the set must therefore remain free. Please do not cover the set.Wall mounting: Leave at least 10 cm of space all around the set at the side, above and below.Table / stand foot: Leave at least 10 cm clear space around the set at the side and at the top.

Foreign bodies

Foreign bodies inside of the set can lead to short circuits and fires.Danger of injury and damage exists.Therefore avoid metal parts, needles, paper clips, liquids, wax or similar passing through the ventilation slits of the rear pan-el into the interior of the set.Should something get into the interior of the appliance, imme-diately pull out the mains power plug of the set and inform the customer service department for checking.

Installation
  • Opting for an incorrect or wrongly mounted installation can lead to accidents. Rolling or falling sets can cause injuries or damage.
  • Loewe TV sets are specified for Loewe accessories. We strongly recommend the use of original Loewe installation options. Do not use any installation options that are not approved for your TV set!
  • Note the instructions regarding the mounting for the different possible installation options! A corresponding documentation is included with every Loewe product.
  • Check before the installation of the set, whether the final loca-tion with regard to the surface (pressure sensitivity) and sta-bility (static) is designed for the load from the set! This applies in particular to high-gloss lacquered surfaces and surfaces made of real wood, real wood veneer and plastic surfaces.
  • Only place the TV set on a level, stable, horizontal base with table or stand foot! The set should especially not protrude at the front when installing it in or on furniture.
  • Do not place the television set on cloth or other materials that may be located between television set and supporting furniture. Educate children about dangers of climbing on furniture to reach the television set or its controls.
  • The usual usage position of the TV set should be followed. The TV set can only be operated horizontally upright A . The inclination can amount to a maximum of 10 degrees for wall mounting B . The TV set must never be operated in portrait orientation, C , horizontal D or overhead on the ceiling E .

Position the set so that it is not exposed to direct sunlight and additional heating from radiators!Do not place the TV in a location where vibrations can arise! This can lead to damage.In the case of installation options for third-party manufacturers with a motor drive, it is to be ensured that the adjustment of the TV set does not occur manually. It is generally not advisable to use the installation options of other manufacturers with locking devices in certain positions.When using accessories from third-party manufacturers, please ensure that you can adjust the TV set easily to the re-spective installation option.

When adjusting the TV set, ensure that the pressure applied to the set frame is not too great. Especially in large format displays, there is the danger of damaging the display.

The mounting of a TV set on a holder according to the VESA standard requires mandatory use of the VESA adapter bolts. Otherwise, damage to the TV may result.The Vesa adapter bolts must be attached to the TV set with a torque of circa 4 Nm. You can obtain these from your Loewe dealer (you can find further information found in the online user handbook).

Make sure that after unpacking and setting up the TV set the packaging material does not fall carelessly into the hands of children.Please also note the disposal instructions for packaging and carton (see chapter Environment/Disposal/Licences).

Supervision

  • Do not let unsupervised children handle the TV set nor let them play in the immediate vicinity of the TV set!
  • The set could be knocked over, moved or pulled down from the stand surface and injure people.
  • Do not leave the TV set unattended when switched on!

VolumeLoud music can lead to hearing damage. Avoid extreme sound volume, especially over extended periods of time and when using headphones!

Thunderstorms

  • During thunderstorms, pull out the mains power plug and all connected antenna cables from the TV set!
  • If you have connected a network cable to the LAN port, remove this as well!
  • Electrical surges due to lightning strike can damage the set both via the antenna system and via the mains power supply.
  • Even in the case of prolonged absence, the mains power plug and all connected antenna cables should be disconnected from the TV set.
Cleaning and care/chemicals
  • Before cleaning, switch the TV set off using the mains power switch!
  • Damages caused by chemicals can lead to adverse effects and development of fire. Never expose the set or accessories to aggressive (e.g. corrosive) chemicals such as alkalis or acids!
  • Only clean the TV set, the front screen and the remote control with a damp, soft, clean and colour neutral cloth, without any aggressive or scouring cleaning agents!
  • The loudspeaker panel of your TV set is textile-covered. Hoover the surface regularly with a soft brush attachment!For contaminations or stains:
  • Moisten a soft, colour neutral cloth with detergent solution or commercially available stain remove and rub the stain gently away! You can also treat the stain directly with a commercial dry stain remover spray (hoover up the dust).
  • Do not moisten the covering fabric directly with detergent solution or stain remover (risk of stain circle formation)! Do not use solvents to clean the fabric!
  • Note the usage instructions of the manufacturer when using stain remover!
  • When cleaning loudspeaker panels which have been exposed to nicotine, there is an increased risk of stain circle formation.

Remote control button mapping

Depending on the application (TV / video / audio / photo / apps) and function (for example, DR +, EPG, PIP, Teletext, HbbTV etc.), the key assignment can deviate from the assignment described here (see corresponding chapter of the on-line user handbook).

  1. Sound mute/on.
  2. LED display for currently operated device.
  3. Call the TV mode.
  4. Reassign remote control to SetTop-Box (1 (presetting: Apple TV).
  5. Pressing briefly: Open the DR+ archive.Pessing longer: Call timer.
  6. Pressing briefly: Add current object to Home favourites.Pessing longer: Call up App Gallery or Mimi DefinedTM (1 (3.
  7. EPG (Electronic Programme Guide) on/off.
  8. Teletext/MediaText (2 on/off.
  9. Pressing briefly: Call menu options for the active operating mode.Pessing longer: Call System settings.
  10. V+/V- increase/reduce volume.
  11. Pressing briefly: Call channel list.Pressing longer: Call expanded channel list.In the menu: confirm/call up.
  12. Green coloured key: screen on/off in Audio/Radio mode.
  13. Red coloured key: call preferred value-added network service, if available (2.
  14. Pressing briefly: skip backwards.Pressing longer: winding backwards.
  15. Pressing briefly: direct recording (with determination of recording duration).Pressing longer: One Touch Recording.
  16. Pause / Start/pause the timeshift television.
  17. Stop / End timeshift (return to live image).
  18. Pressing briefly: skip forwards.Pressing longer: winding forwards.
  19. Play / Start/continue timeshift television.
  20. Blue coloured key: call channel menu options(selection of language/sound, subtitles or channel/video track).
  21. Pressing briefly: Yellow coloured key: call history.Pressing longer: Yellow coloured key: call last channel.
  22. RIGHT’ LEFT’ UP’ DOWN Navigation on the user interface, select objects.In the menu / lists: select/set.
  23. P+/P– next/previous channel.
  24. Pressing briefly: step / level back.Pressing long: close all displays.
  25. Press briefly during an on-screen display: info display. Info text appropriate to the content that can assist you further, should you have any questions about your TV set.Press briefly, without on-screen display: access status display. With status display open and repeatedly pressing the key call the detailed information on the broadcast.Press longer: show key explanation.
  26. PIP (picture in picture) on/off.
  27. Call up the Home view.
  28. Select channels with numeric buttons directly.In the menu: enter numbers or letters
  29. Call Sources.
  30. Reassign remote control to video device (1 (presetting: BluTech Vision 3D).
  31. Call radio mode (standard assignment) (1.
  32. Switches the TV set on (mains switch must be turned on) or switches to standby mode.Press briefly while TV set is switched on: TV set and all CEC-enabled devices connected to the HDMI ports will be switched off to standby (System Standby).

(1 The assignment of these keys can be changed. The description refers to the standard setting. The factory setting of the keys can vary depending on the firmware version of theremote control.(2 Depending on the settings HbbTV mode on/off, start behaviour of HbbTV station (System Settings >Control > more … > HbbTV).(3 Default assignment for the long key press: Mimi-DefinedTM on/off (if Mimi-DefinedTM is activated on the TV set), otherwise call up App Gallery.

Position and function of the connections

  1. Slot for Kensington lock
  2. Mains switch
  3. AC IN – Mains connectionMains socket – 220-240 V ~ 50 / 60 Hz
  4. DIGITAL AUDIO LINK – Surround audio outputs (digital) – (RJ45)
  5. LAN – Network connectionRJ-45 – Ethernet / Fast Ethernet
  6. ANT SAT 1 – Satellite antenna (Sat tuner 1) DVB-S/S2F socket – 75 Ohm / 13/18 V / 500mA
  7. ANT SAT 2 – Satellite antenna (Sat tuner 2) DVB-S/S2F socket – 75 Ohm / 13/18 V / 500mA
  8. ANT TV – Antenna/cable analogue / DVB-T/T2 / DVB-CIEC socket – 75 Ohm / 5 V / 80mA
  9. HDMI 1 – HDMI input 1 (1 (with Audio Return Channel)HDMI – Digital Video IN/Audio IN/OUT
  10. HDMI 2 – HDMI input 2 (1HDMI – Digital Video IN/Audio IN
  11. USB 3.0 – USB connectionUSB type A – USB 3.0 (max. 2A (5)
  12. AUDIO OUT/TOSLINK – Audio output (analogue/digital) (3Jack 3,5 mm (analogue) L/RMini Toslink (digital)
  13. HEADPHONE – Headphone connectionJack 3,5 mm – Headphones 32–200 Ohm
  14. RS-232C – Serial interface (2 – (RJ12)
  15. AV – Center IN (4Micro AV socket
  16. HDMI 3 – HDMI input 3 (1HDMI – Digital Video IN/Audio IN
  17. COMMON INTERFACE – CI slot 1 (standard V1.4)
  18. COMMON INTERFACE – CI slot 2 (standard V1.4)
  19. HDMI 4 – HDMI input 4 (1HDMI – Digital Video IN/Audio IN
  20. USB 2.0 – USB connectionUSB type A – USB 2.0 (max. 2A (5)
  21. USB 3.0 – USB connectionUSB type A – USB 3.0 (max. 2A)

Technical data

Changes of technical data and design of the equipment reserved.

Loewe device type: bild 5.ȱ5 w,% bild 5.ű5 w,%
Part number: ƐƔƏƒƓşƐƋ ƐƔƏƒƔşƐƋ
EU energy efficiency class: see enclosed energy label or under www.loewe.tv/int/support
Screen diagonal: 164 cm / 65 inch 139 cm / 55 inch
Power consumption On-Mode (max.) (Audio output 1/8 of the maximum value): 443 W 330 W
Power consumption On-Mode (home) (1: Annual energy consumption (1: see enclosed energy label or under www.loewe.tv/int/support
Power consumption quick start mode: 65,0 W 63,0 W
Power consumption network standby mode (WoL/WoWLAN max.): 0,69 W 1,09 W
Power consumption Standby Mode: 0,38 W 0,37 W
Power consumption when set is switched off: 0 W 0 W
Picture format / Resolution: 16:9 / Ultra HD 3840 x 2160 px
Display technology: LCD with Edge-LED-Backlight
Device dimensions without stand (W (2 x H x D): 144,9 x 88,3 x 6,4 cm ƌƍƍǷƓ ş ƒƏǷƋ ş ƐǷƑ Ąİ
Weight without stand (approximate): ƍƔ,9 kg 2Ǝ,Ɠ kg
Ambient temperature: 5° C – 35° C
Relative humidity (non-condensing): 20 – 80%
Air pressure: 800 – 1114 hPa (0 – 2000 m above sea level)
Chassis designation: SL520
Power supply: 220 V – 240 V/50–60 Hz
Tuner:                                           terr./cable:

Satellite:

 VHF/Hyperband/UHF

4 levels: 13/18V/22kHz / 16 levels: DiSEqC 1.0 / single-cable system: EN 50494
Range:                                          terr./cable:

Satellite:

 Terr./cable: 45 MHz up to 860 MHz Satellite: 950 MHz up to 2150 MHz
Channel storage locations incl. AV and radio: 6000
TV standards:                                   analogue:

digital:

 B/G, I, L, D/K, M, N

DVB-T/T2, DVB-C, DVB-S/S2 (UHD via DVB to max. 60 Hz)
Colour standards: SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz)
Sound formats:                          analogue (FM): analogue (NICAM): digital (MPEG): Mono, Stereo, Dual channel Mono, Stereo, Dual channel

Mono, Stereo, 2-Ton, PCM, Dolby Digital, Dolby Digital Plus, Dolby Digital Pulse, Dolby Virtual Speaker, Dolby Pro Logic II, Dolby TrueHD
Audio output power (sine / music): 2 x 20W / 2 x 40W
Acoustic speaker concept: — —
Teletext: TOP / FLOF / HiText (Level 2.5)
Page memory: 2000
LAN:                                Standards supported: 10 Mbit/sec Ethernet (10Base-T)/100 Mbit/sec Fast Ethernet (100Base-T)/ 1000 Mbit/sec Gigabit Ethernet (1000Base-T)
WLAN:                             Standards supported: Power/Frequency range:

Types of encoding that are supported:

 IEEE 802.11a/b/g/n, 802.11ac

Maximum power <100 mW at 2400-2483,5 MHz and 5150-5725 MHz WEP 64 and 128 Bit (ASCII and HEX), WPA PSK, WPA2 AES
Bluetooth:                      Power/Frequency range: Bluetooth protocols Maximum power <10 mW at 2,4 GHz A2DP SRC, A2DP SNK, HID
Home networking standard: Universal Plug and Play Audio / Video (UPnP AV)
Formats supported (3:                           Pictures: JPEG, JPEG progressive (max. resolution 3840×2160), PNG
Audio: MP1, MP2, MP3, AAC, AAC_LATM, ALAC, AMR_NR (Adaptive Multi-Rate), OPUS, FLAC,

PCM, Ogg Vorbis, AC3 (Dolby Digital), EAC3 (Dolby Digital Plus / Dolby Atmos)
Video: VP6, VP6F, VP8, VP9 profile 0 and 2 up to level 5.1 ( Hz) MPEG, MPEG 2, MPEG 4 (excluding DivX 5.0), MSMPEG4v3, H.263, H.264/AVC up to High Profile @ Level 4.2 (Full HD @ 60 Hz), H.265/HEVC up to main 10 profile @ level 5.1 ( Hz), Real Video (RV30, RV40), FLV1 (Sorenson Spark)
HDR: Dolby Vision including low latency mode, HDR10, HLG
Container: AVI, WAV, OGG, FLV, TS/PS, MKV, MPEG/MPG (MPEG to MPEG 4), WEBM, MOV (Quick time), 3GPP, 3G2, 3GP, RM, VOB
  1. The energy consumption per year is calculated on the basis of a daily four-hour operation of the TV set on 365 days. The actual energy consumption will depend on the way the TV set is used. On-Mode (home) values less than 100 W must have decimal places (,0).
  2. The width of the TV set can be increased by up to 8,2mm depending on the type of TV  set in the area of the side-mounted Loewe brand label.
  3. For the playability of the individual formats no guarantee can be given.

Environment

Power consumptionYour TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see chap-ter Technical data). If you want to save even more energy then switch the device off with the mains switch. Please also note that the EPG data (Electronic Programme Guide) is lost and possibly programmed timer recordings cannot be carried out by the TV set.The TV set will be completely separated from mains only when you unplug the mains cable.The power consumed by the TV set during operation depends on the energy efficiency preset in the initial installation or on the setting in the system settings.If you activate the automatic dimming, your TV picture will adapt to the ambient brightness. This reduces the power consumption of the TV set.

Automatic shutdownIf the TV is not operated for 4 hours (adjustment of volume, programme change, etc.) the TV will automatically switch to stand-by mode to save energy. A prompt to terminate this shutdown process appears one minute before the 4 hours expire.By default, the automatic shut-off is active in the energy efficiency mode home Mode/personal mode, premium mode.Automatic shutdown does not occur when using the radio without screen display (screen off).

Disposal

You have chosen a very high-value and durable product.

Packaging and cardboardThe disposal of the packaging will be gladly handled for you by your specialist dealer. If you dispose of the packaging yourself, dispose of the packaging in sorted waste disposal and according to the local disposal regulations. Place cardboard and paper in the waste paper, foils and polystyrene in the recyclable waste collection.

The set

Your Loewe product is made with quality materials and components that are recyclable and reusable.This symbol means that electrical and electronic equipment incl. cables must be disposed of separately from household waste at the end of their service life.

You can return your old set for free at designated recycling centres, or at your dealer, if you buy a similar new device. Additional details about returns (even for non-EU countries) are also available from your local government. They make an important con-tribution to the protection of our environment.

The batteries

The original equipment batteries do not contain harm-ful substances such as cadmium, lead or mercury.Used batteries should not be disposed of in household waste. Dispose of used batteries free of charge in the collection containers set up at the dealer or at the public collection points.

Licences

Dolby Audio, DolbyVision and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Lab-oratories. Confidential unpublished works.Copyright © 2003-2015 Dolby Laboratories. All rights reservedThis set contains a software which is partly based on the work of the Independent JPEG Group.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).This software is provided by the OpenSSL project “as is“ and any expressed or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the OpenSSL project or its contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.This product includes cryptographic software written by Eric Young ([email protected]).This product includes software written by Tim Hudson ([email protected]).This product contains software which was developed by third parties and / or software which is subject to GNU General Public License (GPL) and/or GNU Lesser General Public License (LGPL). You can pass on and modify them in accordance with Version 2 of the GNU General Public License or optionally every later version which is published by the Free Software Foundation.The publication of this programme by Loewe is carried out WITHOUT ANY GUARANTEE OR SUPPORT, particularly without an implicit guarantee concerning MARKET MATURITY or the USABILITY FOR A SPECIFIC PURPOSE. Details can be found in the GNU General Public License. You can obtain the software via the Loewe customer service department.The GNU General Public License can be downloaded from: http://www.gnu.org/licenses/

Technical information

About the OLED screenThe TV set with OLED screen you have purchased satisfies the most rigorous quality requirements and has been inspected with respect to pixel errors.Despite of thorough care when manufacturing the display, it cannot be 100% guaranteed that no subpixel defects will occur due to tech-nical reasons.Please understand that these types of effects, as long as they are within the limits specified in the standard (ISO 9241-307, fault class II), cannot be considered as a device defect in terms of the guarantee.Organic Light Emitting Diodes are an image technology based on self-luminous pixels that offer clear benefits in terms of image quality and performance.Under certain conditions, persistent, one-sided loads on the OLED material can result in persistence image faults which are irreversible. Residual image issues can arise by using static image content over a longer period, such as static images, subtitles or ticker displays, loop-ing dia-shows or video sequences, static displays serving as presenta-tion monitors or with video games, black bars in some screen formats.These residual image issues are not defects within the meaning of the warranty.To minimise such issues, Loewe has developed a special algorithm for detecting image content.If static images are displayed for too long, the TV set automatically switches to a screen-friendly contrast mode. After a new user oper-ation, the device immediately returns to its normal state. In addition, menu insertions are gradually reduced or displayed transparently after one minute.Under normal viewing conditions, such residual image issues do not arise.

Information about connected USB hard drivesSwitching off the TV set with the mains switch during operation or an inadvertent disruption to the power supply (e.g., power failure) can cause damage to the hard disk file system and hence loss of the recorded broadcasts.Never ever disconnect the USB storage device from the TV set during a copy process. Before switching off the set with the mains switch, we recommend you to switch it to standby mode.If, contrary to expectation, you are still experiencing problems with the operation of the hard drive, you can first carry out a test. In addition, a formatting of the hard disk can be remedy. In the process, however, all content on the hard disk is deleted. You can find the correspondingmenu items under System settings Control more …  Hard disks.Loewe are not liable for the loss of data on the integrated hard disk of your TV set. To avoid data loss, we recommend copying important recordings to an external storage medium.

Software updateIt is possible to update the software on your Loewe TV set.In the software update (package update) all the software releases in the TV set are scanned and updated as required.Current software versions can be downloaded from the Loewe Internet site (see below) and installed on your TV set using a USB stick.If your TV set is connected to the Internet, the TV set can be updated directly via the Internet.For more information on the software update, please refer to the user handbook which can be downloaded from the Loewe Internet site.

Possible installation options

You can use the following Loewe installation options listed for your TV set.Do not use any installation options that are not approved for your TV set.

  73190×00

72815×00

72115×80

71391×20

 floor stand 43-65 TS Plate

WM 67

WM Slim / Vesa Size 300
bild 5.55 72670×00

73190×00

72815×00

72115×80

71363×00

71391×20

 FS Plate 55_65 floor stand 43-65 TS Plate

WM 67

WM Isoflex 32-55

WM Slim / Vesa Size 300

Conformity / Manufacturer’s declarationLoewe  hereby declares that this product meets the essential requirements and other relevant provisions of Directive 2014/53/EU and all applicable EU directives.In the frequency range 5150 to 5350 MHz, this TV set is restricted to indoor use in the following countries: Belgium, Bulgaria, Denmark, Germany, Estonia, Finland, France, Greece, Ireland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, United Kingdom, Cyprus.You can find the complete declaration of conformity in the product selection at: www.loewe.tv/int/support

report this ad

ImprintLoewe TECHNOLOGY GmbH          Printed in GermanyIndustriestraße 11                                  Editorial date ©D-96317 Kronach                                  Loewe TECHNOLOGY GmbH, Kronachwww.loewe.tvThe information in this document is subject to change without notice and does not constitute any obligation on the part of Loewe TECHNOLOGY GmbH.All rights including translation, technical modifications and errors reserved.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,