SPI-16S LED Fantastic controller
WIRELESS
SPI-16S is a Mini LED pixel controller, equipped with RF remote M16S, almost able to control all IC-driven LED lights. Compact and powerful, various built-in changing effects and customized scene modes can bring you fantastic color!
By RF remote control M16S, you can select from a variety of dynamic lighting effects, set controlled pixels quantity, adjust the changing speed and brightness, change the lighting moving direction, adjust RGB sequence, select the IC type, store and play customized scene, etc.
Product parameter:
SPI-16S Controller:
| Power Input: | 5~24Vdc |
| Output: | SPI |
| Wireless Signal: | RF 2.4GHz |
| Working Temperature: | -30°C~55°C |
| Pixel Range: | 8~1020px |
| Dimensions: | L135×W30×H20(mm) |
| Weight(N.W.): | 52g |
M16S Remote:
| Working Voltage: | 3V (battery CR2032) |
| Wireless Signal: | RF 2.4GHz |
| Changing Mode: | 16 kinds |
| Working Temperature: | -30°C~55°C |
| Dimensions: | L104×W58×H9(mm) |
| Weight(N.W.): | 42g |
| Package size: L132×W198×H22(mm) | The total weight(G.W.): 145g |
★ Connect the power supply to pixel LEDs separately, in case of overvoltage, overcurrent to the receiver.The receiver only supplies a signal to the LEDs.
System diagram:
Product dimension:
Unit: mm
The remote instruction:
| 0. 7 colors jump | 1. 7 colors flash | 2. 7 colors fade | 3. 7 colors smooth |
| 4. 7 colors horse race | 5. 7 colors circle horse race | 6. 7 colors flow | 7. 7 colors gradients flow |
| 8. 6 colors trail | 9. 6 colors circle trail | 10. Gradients trail | 11. White meteor |
| 12. 6 colors float | 13. 6 colors double trail | 14. Color white float | 15. Bi-color float |
The Learning ID Method:The receiver and remote are Pre-synced at the factory. I deleted it accidentally, the sync method is as follows (multiple remotes could be synced to one receiver):
Learning ID:Short press the “ID learning button” on the SPI-16S receiver, the running light is on. Then press any key on the M16 remote, the running light flicker several times, activated.
Canceling ID:Press “ID learning button” on SPI-16S receiver for 5s, the running light flicker several times, canceled.
Other Setting Instructions of Remote
- Loop playback: Short press
key, then continuous press any 0-15 numeric keys, last press
key to finish.The controller will play cycle the corresponding mode of the numeric key.
- After the remote is paired with the controller, the IC model, pixel ranges, and RGB sequence can be set by the remote.
By factory default, the controller works with TM1809IC pixel light. If work with a different IC model, please setting follow the below instructions. This controller is compatible with the following IC models:
TM 1803/TM1804/TM 1809/TM1812/T M1814/TM 1914/TM 1914A/UCS1903/UCS1909/ UCS1912/UCS2903/UCS2904B/U CS2909/UCS2912/UCS5603A/UC56909/UC56912/W52801/W52803/WS2811/W52812/WS2812B/WS2821/APA102/AP A104/KL590/KL592D/LPD6803/LPD1101/LPD8803/LPD8806/P9813/1L53001/TLS3002/P943/SK6812(RGB)/6S8206 (BGRI/GS8208/SM16703 in factory default.
Manipulate table for choosing ICs, RGB order, or pixel No.
| IC Type | Setting e.g. |
| TM1809 | *1809* |
| LPD6803 | *6803* |
| KL590 | *0590* |
| KL592D | *0592* |
| APA102 | *0102* |
| *1111* |
| Pixel | Setting e.g. |
| 8 | **008 |
| 16 | **016 |
| 100 | **100 |
| 160 | **160 |
| 1020 | **1020 |
| Range: 8-1020 pixels |
| RGB Order | Setting |
| RGB | *123* |
| RBG | *132* |
| GRAB | *213* |
| GBR | *231* |
| BLOG | *312* |
| BGR | *321*. |
[Attn]: The running light of the SPI-16S controller flashes 2s means the set is completed.When setting IC type, pixel number, and RGB order, select multiple keys at a uniform speed. Not too fast.
Terminal description:
Wiring diagram:
LED pixel strip wiring diagram:
a.Conventional connection method.
b.Light fixtures and controller using different operating voltages.
* No further notice if any changes in the manual.Product function depends on the goods.Please feel free to contact your supplier if any questions.
SPI-16S LED Fantastic controllerwww.ltech-led.comUpdate Time: 2020.08.20
References
[xyz-ips snippet=”download-snippet”]