marantz AV Surround Receiver User Guide

marantz AV Surround Receiver User Guide

Before You Begin Required for Setup

Optional

• When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).

What’s In the Box

• The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.

Important: External Antennas

The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the SR7013.

nnConnecting the external antennas for Bluetooth/Wireless connectivity

For each of the two antennas:

1. Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
2. Turn the antenna clockwise until it is fully connected. Do not over tighten.
3. Rotate the antenna upwards for the best possible reception

Setup

There are four steps to the setup process.

1. Installing batteries in the remote control unit
2. Connecting the receiver
3. Following the On-Screen Setup Assistant
4. Downloading the Mobile Apps

1.Installing batteries in the remote control unit

2. Connecting the receiver

1. Place the receiver near your TV and connect the power cord
2. Connect the receiver to your home networkWired LANConnect an Ethernet cable (not included) between your receiver and your network router.Wireless LANWhen connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.
3. Connect the receiver to your TV with an HDMI cableARC (Audio Return Channel) :If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…) ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. Note that some TV manufacturers use other names for the HDMI CEC function.

4. Turn on the TV

   

5. Select the appropriate HDMI input on your TV

   

6. Turn on the receiver• Press X to turn on the receiver.
7. Verify the connection• Verify that you can see this screen on your TV.
8. Verify the connection• Verify that you can see this screen on your TV.If this screen is not displayed, please go back and retry the steps again in the recommended sequence

3 Following the On-Screen Setup Assistant

The Setup Assistant will walk you through connecting and confi guring your speakers and components to your Marantz receiver. Please use the remote control and follow theon-screen instructions.

4 Downloading the Mobile Apps

Download both the “HEOS” App and the “Marantz 2016 AVR Remote” App for the full home entertainment experience.The HEOS App is required to access online music through your AVR.

The HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library

Marantz 2016 AVR Remote

Control your new AVR with the latest Marantz 2016 AVR Remote App. Volume control, sound mode selection and advanced settings are always only a tap away.

Owner’s Manual

• For more information, visit www.marantz.com
• Refer to the Online Manual for other functions information and operation procedure details. manuals.marantz.com/SR7013/NA/EN/

Read More About This Manual & Download PDF:

References

• 
  Marantz™ – Quality Receivers, Amplifiers, & Hi-Fi Components
• 
  SR7013