AV Pre AmplifierAV8805AQuick Start GuideKurzanleitung
 |
 |
Read Me First…Bitte zuerst lesen…
WelcomeThank you for choosing a Marantz Pre Amplifier.This guide provides step-by-step instructions for setting up your Pre Amplifier.
Please do not return this unit to the store – call for assistance.If you need help… :If you need additional help in solving problems, contact Marantz customer service in your area. www.marantz.com
Before You Begin
Required for Setup
Optional
- When connecting this unit to a device that is compatible with the Deep Color, 4K, ARC, and eARC functions, use a “High-Speed HDMI Cable with Ethernet” that displays the HDMI logo.
- When connecting this unit to a device that is compatible with the 8K and 4K 120Hz video, use a“Ultra High Speed 48 Gbps HDMI cable” that displays the HDMI logo.
- These drawings are for illustrative purposes only and may not represent the actual product(s).
What’s In the Box
| Quick Start Guide |  |
Power cord |  |
| Safety Instructions |  |
Sound calibrationmicrophone |  |
| Cautions on UsingBatteries |  |
Sound calibrationmicrophone |  |
| Notes on radio |  |
Remote control unit(RC039SR) |  |
| Cable labels |  |
R03/AAA batteries |  |
| Pre Amplifier |  |
External antennas for Bluetooth/wireless connectivity |  |
- The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.
Important: External AntennasThe removable external antennas are required for bothBluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the AV8805A.
Connecting the external antennas for Bluetooth/Wireless connectivityFor each of the two antennas:
- Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
- Turn the antenna clockwise until it is fully connected. Do not overtighten.
- Rotate the antenna upwards for the best possible reception.
Setup
There are four steps to the setup process.
| 1. Installing batteries in the remote control unit2. Connecting the Pre Amplifier, Power Amplifier, and your TV3 . Following the On-Screen Setup Assistant4 . Downloading the Mobile Apps |
Installing batteries in the remote control unit
Connecting the Pre Amplifier, Power Amplifier, and your TV
1) Place the Pre Amplifier and Power Amplifier near your TV and connect the power cord
 |
 |
 |
|
 |
2) Connect the Pre Amplifier to your home network
Wired LANConnect an Ethernet cable (not included) between your Pre Amplifier and your network router.
Wireless LANWhen connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth/Wireless connectivity” and connect the antennas.
3) Connect the Pre Amplifier to your TV with an HDMI cable
ARC (Audio Return Channel) and eARC (Enhanced Audio Return Channel) support:If your TV supports ARC, your TV can send audio back to the Pre Amplifier when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc.) ARC requires that you enable HDMI CEC on yourTV. Please refer to your TV’s Owner’s Manual for instructions on how to set up HDMI CEC. In addition, if your TV supports eARC, it can also send back high bitrate audio formats such as Dolby TrueHD, Dolby Atmos, DTSHD Master Audio, and DTS:X. Please refer to your TV’s Owner’s Manual for additional information about enabling the eARC function.
4) Turn on the TV
5) Select the appropriate HDMI input on your TV
6) Turn on the Pre Amplifier
- Press
to turn on the Pre Amplifier.
to turn on the Pre Amplifier.
7) Verify the connection
- Verify that you can see this screen on your TV.
If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
Following the On-Screen Setup Assistant
Now TV is connected to the Pre Amplifier.The Setup Assistant will walk you through connecting and configuring your Power Amplifier and components to yourMarantz Pre Amplifi er. Please use the remote control and follow the on-screen instructions.
 |
 |
Downloading the Mobile Apps
Download both the “HEOS” App and the “Marantz 2016 AVR Remote” App for the full home entertainment experience.The HEOS App is required to access online music through your Pre Amplifier.
HEOS
The HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library.
Marantz 2016 AVR Remote
Control your new Pre Amplifier with the latest Marantz 2016 AVR Remote App.Volume control, sound mode selection, and advanced settings are always only a tap away.
 http://qrs.ly/lw4xohw |
is a registered trademark.Owner’s Manual• For more information, visit www.marantz.com• Refer to the Online Manual for other functions information and operation procedure details.manuals.marantz.com/AV8805A/EU/EN/
 tps://qrs.ly/bab5q03 |
 Online Manual |
www.marantz.comYou can find your nearest authorized distributor or dealer on our website.Printed in Japan 5411 11882 10 AM© 2021 Sound United. All Rights Reserved.
References
[xyz-ips snippet=”download-snippet”]