marantz SR6015 AV Surround Amplifier
Required for Setup
Optional
- When connecting this unit to a device that is compatible with the Deep Color, 4K, ARC and eARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
- When connecting this unit to a device that is compatible with the 8K and 4K 120Hz video, use a “Ultra High Speed 48 Gbps HDMI cable” that displays the HDMI logo.
- These drawings are for illustrative purposes only and may not represent the actual product(s).
What’s In the Box
- Quick Start Guide
- Safety Instructions
- Cautions on Using Batteries
- Notes on radio
- Cable labels
- Receiver
- Power cord
- Sound calibration microphone
- Sound calibration microphone stand
- Remote control unit (RC042SR)
- R03/AAA batteries
- External antennas for Bluetooth / wireless connectivity
The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.
Important: External AntennasThe removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the SR6015.
Connecting the External Antennas for Bluetooth / Wireless Connectivity
For each of the two antennas:
- Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
- Turn the antenna clockwise until it is fully connected. Do not over tighten.
- Rotate the antenna upwards for the best possible reception.
Setup
There are four steps to the setup process.
- Installing batteries in the remote control unit
- Connecting the receiver
- Following the On-Screen Setup Assistant
- Downloading the Mobile Apps
Installing Batteries in the Remote Control Unit
Connecting the Receiver
- Place the receiver near your TV and connect the power cord
- Connect the receiver to your home networkWIRED LANConnect an Ethernet cable (not included) between your receiver and your network router.WIRELESS LANWhen connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth / Wireless connectivity” and connect the antennas.
- Connect the receiver to your TV with an HDMI cableARC (Audio Return Channel) and eARC (Enhanced Audio Return Channel) support:If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc.) ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. In addition, if your TV supports eARC, it can also send back high bitrate audio formats such as Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X. Please refer to your TV’s Owner’s Manual for additional information about enabling the eARC function.
- Turn on the TV
- Select the appropriate HDMI input on your TV
- Turn on the receiver
- Verify the connection
- Verify that you can see this screen on your TV.If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
- Verify that you can see this screen on your TV.
WIRELESS LANWhen connecting to wireless LAN (Wi-Fi), follow the instructions in “Connecting the external antennas for Bluetooth / Wireless connectivity” and connect the antennas.
ARC (Audio Return Channel) and eARC (Enhanced Audio Return Channel) support:If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc.) ARC requires that you enable HDMI CEC on your TV. Please refer to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. In addition, if your TV supports eARC, it can also send back high bitrate audio formats such as Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X. Please refer to your TV’s Owner’s Manual for additional information about enabling the eARC function.
If this screen is not displayed, please go back and retry the steps again in the recommended sequence.Following the On-Screen Setup Assistant
Now TV is connected to the receiver.The Setup Assistant will walk you through connecting and configuring your speakers and components to your Marantz receiver. Please use the remote control and follow the on-screen instructions.
Downloading the Mobile Apps
Download both the “HEOS” App and the “Marantz 2016 AVR Remote” App for the full home entertainment experience. The HEOS App is required to access online music through your AVR.
HEOSThe HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library.
Marantz 2016 AVR RemoteControl your new AVR with the latest Marantz 2016 AVR Remote App. Volume control, sound mode selection and advanced settings are always only a tap away.
Owner’s Manual
- For more information, visit www.marantz.com
- Refer to the Online Manual for other functions information and operation procedure details. manuals.marantz.com/SR6015/EU/EN/
report this ad
References
[xyz-ips snippet=”download-snippet”]