Marshall CV503-WP All-Weather HD Miniature Camera User Manual

CV503-WP All-Weather HD Miniature Camera

Broadcast A/V DivisionCV503-WPAll-Weather HD Miniature Camera User Manual

Warranty

1. Menu Structure

SETUP	SUB MENU	SUB MENU
WB CONTROL	ATW
ONE PUSH
INDOOR
OUTDOOR
MANUAL	BLUE
RED
AE CONTROL	AUTO	AGC MAX
SENS UP
AE BRIGHT
FLK CONTROL
LENS MODE (DC IRIS ONLY)
SHUT FIX	SHUTTER
AGC MAX
SENS UP
AE BRIGHT
FLK CONTROL
AGC FIX	AGC
AE BRIGHT
FLK CONTROL
LENS MODE (DC IRIS ONLY)
MANUAL	SHUTTER
IRIS
AGC
FLK CONTROL
LENS MODE (DC IRIS ONLY)
DAY / NIGHT	DAY
NIGHT	NIGHT COLOR
IMAGE CONTROL	LENS SHADING
CONTRAST
BRIGHTNESS
SETUP	SUB MENU	SUB MENU
IMAGE CONTROL	SATURATION
HUE
EDGE ENHANCE
AUTO SATURATE
AUTO EDGE
BLACK WHITE LEVEL
GAMMA CORRECT
DNR	DNR MODE
DNR LEVEL
SPECIAL	DZOOM
DEFOG
DIS
BACKLIGHT
BINNING
DEFECT PIXEL
DISP FUNCTION
WDR
FLICKER DETECT
PRIVACY
SETUP	CAM TITLE
COMMUNICATION	RS-485/ID
SYSTEM INFO
OUTPUT FORMAT
RESET	USER/FACTORY
EXIT

www.marshall-usa.com

2. OSD Joystick and Button

503-WP

I/O Cable (included in box) for CV503, CV506, CV344, CV346

1. SET Used to access the menu and confrim selection.2. UP  Used to move the cursor up.3. DOWN Used to move the cursor down.4. LEFT Used to move the cursor left and change the value5. RIGHT Used to move the cursor to the right and change the value.

Press SET button to access the Main Menu

Use the UP & DOWN buttons to select the desired item.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

Use the LEFT & RIGHT buttons to change thesub-item.

> Icon indicates “Press OSD button” or “Enter Sub Menu”

3. WB CONTROL

Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT buttons.

• ATW: Continuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1,900°K to 11,000°K.
• ONE PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place the white paper in front of the camera when OSD button is pressed to obtain the optimum result.
• MANUAL: Select this to fine-tune White Balance manually. You can adjust the blue and red tone level manually.1. BLUE: Adjust the Blue tone of the image. (0~100)2. RED: Adjust the Red tone of the image. (0~100)
• INDOOR: Select this to adjust white balance to indoor lighting condition.
• OUTDOOR: Select this to adjust white balance to outdoor lighting condition.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >AUDIO >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

WB CONTROL MANUALMODE MANUALPUSHBLUE 50RED 50RETURN >

1. Adjust White Balance first by using the ATW mode before switching to MANUAL mode.
2. White Balance may not work properly under the following conditions. In this case, selectthe ATW mode.

• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in place whereillumination changes dramatically, the White Balance operation may become unstable.

4. AE CONTROL

Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or DOWN buttons.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >AUDIO >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

AE CONTROLAE MODE AUTOSHUTTERIRISAGCAGCMAX 13SENS UP OFFAE BRIGHT 6FLK CONTROLOFFLENS MODERETURN

• AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available under this menu.
• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the selected shutter speed.
• AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain value.
• MANUAL: Adjusts the exposure level manually.1. SHUTTER: Speed can be set at auto or manual. (1/30~1/10,000)2. IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)3. AGC: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)4. AGC MAX: Used to set maximum gain value to control the video noise caused by Auto Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)5. SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust the picture quality. (Off, x2~x10)6. AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~10)7. LENS MODE: Lens setting will be optimized for selected environment, for DC Iris lens only.8. FLK CONTROL: Provides a proper image sensor frequency to match the power frequency in order to minimize video flicker.

5. DAY / NIGHT

Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN buttons.

• MODE: Auto, Day, Night
• AUTO: Camera will change between day and night mode when the light condition changes.
• DAY: Camera will stay on day mode.
• NIGHT: Camera will stay on night mode.
• DELAY [SEC]: Delay time of changing mode can be adjusted from this menu.
• D->N LEVEL: Change the camera threshold value of Day to Night mode.
• N->D LEVEL: Change the camera threshold value of Night to Day mode.
• NIGHT COLOR: Change the camera threshold value of Night to Day mode.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT >

DAY/NIGHTMODE AUTODELAY [SEC] 5D->N LEVEL 22N->D LEVEL 12NIGHT COLOR OFFRETURN

6. IMAGE CONTROL

Select IMAGE CONTROL using the UP or DOWN button. You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN buttons.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT >

IMAGE CONTROLLENS SHADING OFFCONTRAST 11BRIGHTNESS 11SATURATION 10HUE 0EDGE ENHANCE 5AUTO SATURATE MIDDLEAUTO EDGE ONBLACK WHITE LV >GAMMA CORRECT DEFAULTDNR >RETURN

• LENS SHADING: Corrects inconsistent brightness level in the image.
• CONTRAST: Adjust the image contrast level value.
• BRIGHTNESS: Adjust the image brightness level value.
• SATURATION: Adjust the image saturation level value.
• HUE: Adjust the image hue level value.
• EDGE ENHANCED: Adjust the image sharpness level.
• AUTO SATURATE: Decrease saturation automatically when noise scene is detected.
• AUTO EDGE: Adjust line sharpness level automatically.
• BLACK WHITE LEVEL: Adjust the image black level value.
• GAMMA CORRECT: Adjust the image output gamma level.
• DNR: Reduces the video noise at low ambient light.Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.

7. SPECIAL

Select SPECIAL using the UP or DOWN button. You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using the UP or DOWN buttons.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

SPECIALDZOOM OFFDEFOG OFFDIS OFFBACKLIGHT OFFBINNING OFFDEFECT PIXEL ONDISP FUNCTION >WDR OFFFLICKER DETECT OFFPRIVACY >RETURN

• DZOOM: Digitally zoom the video by the desired ratio.
• DEFOG: This feature will help increase visibility in extreme weather conditions, such as fog, rain or in a very strong luminous intensity.
• DIS: This feature enables digital image stabilization.
• BACKLIGHT: Adjust backlight compensation by choosing either BLC HLM from this menu.
• BINNING: Enable or disable pixel binning.
• DEFECT PIXEL: Advanced defective pixel correction menu.
• DISP FUNCTION: Display effect such as freeze mirror, rotation, and style can be applied from this menu.
• WDR: This feature enables user to view both object and background more clearly whenbackground is too bright.
• FLICKER DETECT: Adjust the image sensor frequency to match the power frequency.
• PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones.

8. SETUP

CAMERA setup can be adjusted from this menu. You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN buttons.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

SETUPCAM TITLE OFFCOMMUNICATION >SYSTEM INFO >OUTPUT FORMAT 1080p 59.94RETURN

• CAM TITLE: Camera title can be turned ON or OFF.
• COMMUNICATION: VISCA communication can be adjusted.1. CAM ID: Camera ID can be setup. (0~7)2. ID DISPLAY: Camera ID display can be displayed.3. BAUDRATE: Camera baudrate can be set.(2400, 4800, 9600, 19200, 38400)
• SYSTEM INFO: Camera information can be found under this menu.
• OUTPUT FORMAT: Camera resolution and frame rate can be set. (1080 by default) Select the FRAME RATE using the LEFT or RIGHT buttons. Available Frame Rates are: 1920 x 1080p 60, 59.94, 50, 30, 29.97, 25, 24, 23 1920 x 1080i 60, 59.94, 50 1280 x 720p 60, 59.94, 50

9. RESET

Select RESET using the UP or DOWN buttons.

• RESET: Reset the camera settings the factory defaults or user setting value.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

RESETRESET MODE FACTORYRESET >SAVE AS USERRETURN

• ON: Set the camera setting to either “FACTORY” or “USER” of “CHANGE” menu. Make sure to select the right mode from “CHANGE” before defaulting the camera.
• RESET MODE: Select the desired setting mode. Select from USER or FACTORY using the LEFT or RIGHT button.1. USER: Select “USER” if setting value user saved last is needed.2. FACTORY: Select “FACTORY” if factory default setting is needed. “FRAME RATE”, “CAM ID”, and “BAUDRATE” will note change.To RESET Camera to default settings (1920x1080p30fps) power-cycle the camera then use the following combo on OSD Joystick: UP, DOWN, UP, DOWN, then push and HOLDjoystick in for 5 seconds then release.

10. EXIT

Select EXIT using the UP or DOWN button.

MENUWB CONTROL >AE CONTROL >DAY/NIGHT >IMAGE CONTROL >SPECIAL >SETUP >RESET >EXIT

• SAVE: Exit the setup after saving the value changes.

11. TROUBLESHOOTING

Before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult with your supplier.

Problem	Solution
Nothing appears on the screen.	1. Check that all connected devices are powered on.2. Confirm that the voltage is correct.3. Confirm that the power supply provides enough current to power the camera.4. Check that all video cables are properly connected.
The picture is not clear.	1. Check that your monitor is correctly adjusted.2. Confirm that the glass in front of the lens is clean. If there is dust, dirt or fingerprints on the glass, the image quality will be affected.3. To clean the glass, use a soft, dry and non-abrasive cloth or a commercially available lens cleaning set.4. Adjust the focus by carefully rotating the threaded M12 lens.
The picture has interference.	1. Ensure that the camera is not positioned near a high voltage source, such as a power generator.2. Check that the connected BNC cable is terminated properly.3. Check that all video cables are properly connected.
The picture is flickering continually.	1. Check the termination and set the impedance at 75Ω properly.2. Ensure that the camera is not pointing towards the Sun or any  light source.3. Check the performance of any intermediate devices.4. Check if the distance of the video cable exceeds the maximum  transferable limitation.
Focus	The miniature (M12) lens that comes installed on camera is set to optimal focus position, however if lens is slightly out of focus rotate  lens clockwise or counter-clockwise slightly to fine tune. Once the desired focus point is achieved, rotate the locking nut back  towards the camera which will hold the lens position at optimal  focus point.

Warranty

Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice.20608 Madrona Avenue, Torrance, CA 90503 Tel: (800) 800-6608 / (310) 333-0606 · Fax: 310-333-0688www.marshall-usa.com

NB070819a

References

• 
  Marshall Electronics – Professional Broadcast Miniature/Compact/Indoor 4K/UHD/HD Cameras, 4K Rack Mount/Desktop Monitors, Hardware, and Accessories.
• 
  Marshall Electronics – Professional Broadcast Miniature/Compact/Indoor 4K/UHD/HD Cameras, 4K Rack Mount/Desktop Monitors, Hardware, and Accessories.