Marshall CV620-WH4 PTZ Camera with 20x Optical Zoom Installation Guide
Installation Using Ceiling or Wall Mount
Prepare parts and equipment required for installation
- Metal Plates A and B
- M3 Screws (8x Silver, 2x Black)
- Standard Mounting Hardware (Drill, Screwdriver, ladder, etc.)
Installation Steps
- Adjust desired camera resolution using the DIP Switch setting prior to installation (refer to 2. DIP Switch Setting).
- Attach Metal Plate A to camera base using supplied M3 screws (silver).
- Attach Metal Plate B to ceiling or wall using proper mounting hardware.
- Attach Camera (with Metal Plate A) to Metal Plate B, and slide to the right to lock the plates in place.
- Secure the installation with 2x M3 screws (silver), and one M3 (black) screw.
NOTE: Please be sure to use proper mounting hardware, and ensure that the mounting surface has obtained UL security approval.
DIP Switch Setting
Output Switch
IR Select
|
ID |
SETTING |
|
1 |
 |
|
2 |
 |
|
3 |
 |
|
SETTING |
OUTPUT MODE |
| 0 |
1920X1080/60p |
|
1 |
1920X1080/50p |
| 2 |
1920X1080/30p |
|
3 |
1920×1080/25p |
| 4 |
1920×1080/60i |
|
5 |
1920×1080/50i |
| 6 |
1280×720/60p |
|
7 |
1280×720/50p |
| 8 |
1280×720/30p |
|
9 |
1280×720/25p |
|
A |
1080/59.94p |
| B |
1080/59.94i |
|
C |
1080/29.97p |
| D |
720/59.94p |
|
E |
720/29.97p |
| F |
Reserved |
Customer Support
Toll Free: (800) 800-6608
Website: www.marshall-usa.com
Support: [email protected]
References
[xyz-ips snippet=”download-snippet”]