MAXXTER ACT-BTHS-03 Bluetooth Stereo Headset User Manual

MAXXTER ACT-BTHS-03 Bluetooth Stereo Headset User Manual

Features

  • Bluetooth stereo headphones with built-in microphone
  • Up to 250 hours of standby time and about 5 hours of listening time
  • Automatically mutes your music in case of incoming calls
  • Multifunction button, volume control ,Previous/Next track
  • LED status indicator
  • Comfortable ear cushions and adjustable headband

Specifications

  • Bluetooth Version : v.5.0
  • Bluetooth frequency range: 2.4 GHz – 2.4835 GHz
  • Transmitting power: < 5 dBm
  • Supported profiles: HSP, HFP, A2DP and AVRCP
  • Recharging time: approx. 2 hrs
  • Operation distance: up to 10 m in the open air
  • Speaker diameter: 40 mm
  • Speaker frequency response: 20 Hz – 20000 Hz
  • Sensitivity:102 +/-3dB at 1KHZ
  • Impedance: 32 Ohm +/-15%
  • Battery: 150 mAh Li-Polymer
  • USB charging cable length: 0.5 m
  • Audio cable length: 1 m
  • weight :168 g

OPERATING

First, make sure Bluetooth is turned on for the device you wish to pair.

KEY FUNCTIONS

Power switch/ Receive/ Hang up phone call, Redial

Press for 2-3 seconds to power on, the blue and red indicators take turns flashing. Search for the device name “ACT-BTHS-03” and connect.Power off: Press for 2-3 seconds to power off.When receiving a phone call, press it to answer the call, press it again to end the phone call.Long press for 2 seconds to reject the phone call.Short press twice to re-dial the last phone number you called.In music mode, press it 1 time to pause, and press it again to play.

+ Volume UpIn Music Mode, press the button to increase the volume.

– Volume DownIn Music Mode, press the button to decrease the volume.

< Previous songIn Music Mode, press the button to previous song.

> Next songIn Music Mode, press the button to next song.

CHARGING

This headset is equipped with a built-in non-detachable, rechargeable battery.Please make sure that the battery is charged fully for first time use.Connect the charger to the charging port. Insert the charger into a standard USB charging port. While charging, indicator light will turn Red. When fully charged, the red LED indicator will be off. It can reduce the battery performance with repeated long term overcharging.Please do not dial or receive phone calls while charging.

Warnings

Declaration of conformity

This product is tested and complies with the essential requirements of the laws of member states concerningRED (2014/53/EU), RoHS (2011/65/EU). The CE declaration can be found under www.maxxter.biz

report this ad

 

[xyz-ips snippet=”download-snippet”]