MEDIC THERAPEUTICS H405591 Home Treadmill Plus User Manual
Prior to using the Medic Therapeutics Home Treadmill Plus, read the manual carefully for correct operating instructions, paying special attention to the safety precautions. Retain this user manual for further reference, as assembly instructions, the correct lock measurements and child safety information is included.
CAUTION: The weight of Home Treadmill Plus user should not exceed 243 pounds (110 kilograms). Consult a doctor prior to use. No health complaints have been recorded involving or related to this equipment. Although the weight restrictions provided by our health experts are believed to be accurate, they should not be relied on. Consult your physician for certainty.
WARNINGBefore using this product, please consult your physician for a complete medical examination. Frequent and strenuous exercise must be approved in advance by your doctor. If you feel any discomfort as a result of using this product, stop exercising immediately and consult your doctor. The correct use of this product is essential. Please read the manual completely before engaging in an exercise routine.
Keep children and pets away from this equipment even when the equipment is not in use. This exercise machine is not designed to be used by children or people with physical disabilities without supervision. Children must be supervised at all times to avoid injury.
- Always wear sportswear and athletic shoes during your exercise period.
- Make sure all nuts and bolts are tight before using the equipment.
- To maintain safety and good condition, periodic maintenance is necessary for any exercise equipment.
SAFETY INSTRUCTIONS
READ CAREFULLY BEFORE USING THE TREADMILL:
DANGER: To reduce the risk of electric shock; always disconnect the treadmill from electrical power immediately after use and before cleaning, assembling, or maintaining.
NOTE: Failure to follow these instructions can lead to personal injury or damage to the treadmill.
- Never leave the treadmill unattended while it is turned on and connected to electrical power. It is necessary to turn it off from the main switch and disconnect it from the power.
- Do not use the treadmill if the cord is damaged, if it is not working properly, or if it has been exposed to water.
- Do not attempt to make adjustments or maintenance guidelines that are not included in this manual. If the device exhibits problems, please discontinue use and consult your Authorized Service Representative.
- Do not use the appliance outdoors.
- Do not use the device in areas where aerosols are used or near where oxygen is administered.
- Do not pull the treadmill by the power cord or use the cord as a handle.
- Extreme supervision is necessary if the treadmill is used by or near small children, people with disabilities, or pets.
- Keep the treadmill dry and do not use it in wet conditions. Save this manual.
- Do not place the treadmill on blankets or sheets as it could overheat and cause fire, electric shock, or injury to the user.
- Keep electrical cords away from any hot surface.
- Never insert foreign objects into any of its openings.
- The treadmill should be used by only one person at a time.
- Use this appliance only for the use specified in this manual. Do not use accessories that are not recommended by the manufacturer.
- Do not place sharp objects around the treadmill.
- Never use the machine if it is not working properly.
- This machine must not be used for medical purposes.
- This equipment is designed for home use only.
- Take into account that there is a weight limitation in the use of this device, if you weigh more than 243 pounds (110 kilograms) it is not recommended that you use this product. Severe injury could occur if the user exceeds the weight limits stated here. This product has not been designed for users who exceed this weight limit.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agents, or a qualified maintenance person to avoid damage or injury.
- This machine is not designed for people or children with limited physical or mental capacities, or people with zero experience and knowledge, unless they are supervised and instructed by an adult responsible for their safety.
- Injury or damage to health can occur from improper or excessive use of this appliance.
- Keep the treadmill at least 60cm away from walls and always leave free space around it measuring 3 meters wide and 6 meters long, and place the equipment horizontally on a stable surface. Make sure the area around the treadmill remains clear while you use it, see the illustration below:
WARNING: Only connect the treadmill to a grounded electrical outlet.
SECURITY INSTRUCTIONS
- This product must be grounded. If the product is to be damaged, grounding helps resist electrical current and reduces the possibility of electrical shock. This treadmill is equipped with a grounding cord, connector, and plug. The plug must be connected to the socket which in turn must be installed and grounded in accordance with local regulations.
DANGER: Improper grounding could result in risk of electric shock. Consult a qualified electrician if you are in doubt about grounding the product. Do not modify the plug that is included with the treadmill, if the treadmill does not fit your outlet, call a professional electrician to make the necessary modifications.
- This product must be connected to a 127 volt electrical current, previously grounded.
- Do not put your hands on the moving parts of the treadmill. Never put your hands or feet under the treadmill.
- Do not use the treadmill on carpets.
- Before use, check that the band is properly aligned and centered. Check that all fasteners on the treadmill are tight enough and secure.
MAINTENANCE
- Before storing away, make sure the treadmill is turned off and disconnected from electrical power.
- After each session, clean the surfaces with a soft cloth and without any type of chemical cleaners.
- Do not disassemble the equipment. In case of defect or failure of the components, please contact the dealer and do not use the equipment until it has been repaired.
- Do not spill liquid or hit the equipment.
- Do not use liquids to clean electrical components.
- Be sure to regularly inspect the proper functioning of the equipment. It is advisable to do this once a week.
- The safety of this equipment can only be maintained if it is inspected for wear and tear on a regular basis. This revie includes nuts, bolts, moving parts, wheels, spark plugs, resistance points, and connections.
- Special attention to the following components, which are the most susceptible to damage: Computer, security key, walking belt as well as large or small surfaces.
- Broken parts should be replaced immediately and the equipment should not be used until it is fully repaired.
- It is suggested to use the treadmill 1 (one) hour a day. If the machine is not used frequently, it needs to be serviced every 30 days.
BEFORE STARTING THE ROUTINE
- Tighten all nuts and bolts
- Connect the cord to the electrical outlet and press the power button. The equipment will be ready to use.
- Be sure to do a warm-up routine to prevent muscle strain.
- After eating, wait 1 to 2 hours before exercising to prevent muscle strain.
- Begin and increase the duration of the routine progressively. Don’t try to increase your routine suddenly. It i recommended to start with 30 minutes 3 times a week.
- When you turn on the treadmill, place both feet on the side support rails.
- Make sure the Safety Key is in place.
- Pull out the Safety Key if you feel discomfort during exercise.
- Always start the routine at the lowest gear.
- Increase speed gradually.
- Do not make adjustments to the belt while the treadmill is on.
- At the end of each exercise routine, cool down and stretch for a fe minutes to prevent injury, muscle pain, or cramps.
WARNING:
- Before starting any exercise routine consult your doctor. This is especially important in people over the age of 35 or with pre-existing health conditions. Read all instructions before using any exercise equipment.
- We do not assume responsibility for personal injury or property damage caused by the use of this product. Do not operate this machine without proper supervision, as small parts can cause damage or injury to young children.
CAUTION:
- Read all instructions carefully before using this product. Keep this user manual for future reference or reference.
ASSEMBLY INSTRUCTIONS
When you open the box you will find the following components
Tools and parts:
| Number | Name | Description | Quantity |
| 1 | Main Frame | 1 | |
| 2 | Flat Washer | M6 | 2 |
| 3 | Screw | M8 | 2 |
| 4 | Screw | 2 | |
| 5 | Knob | 2 | |
| 6 | Security Key | 1 | |
| 7 | Silicone Oil | 1 | |
| 8 | Allen Key | 1 | |
| 9 | Device Holder | 1 |
ATTENTION: Do not connect the treadmill to electrical power before completing the assembly.
Open the box, take out the main frame and components and place them in a wide free space.
- Step 1:
- Step 2:
INSTRUCTIONS AND PRECAUTIONS
Before starting the exercise session, make sure that the Safety Key is tight on the console and that the Clip-type Lock is tightly attached to your clothing. Always start the routine with both feet on the side rails, not on the treadmill. Allow the treadmill to reach a speed of 0.6 MPH before positioning yourself on the walking belt.
- Make sure the product is connected to a 127 volt electrical current, previously grounded.
- Press the power button, located on the front of the treadmill. It should be in the “ON” position, then press the “START” button and the machine will begin to move slowly.
- During the workout, hold both sides of the heart rate monitor and the console will display heart rate data. Heart rate data will not be displayed if only one indicator is held.
- During an emergency, pull the Safety Key, the machine will stop automatically.
FOLD AND UNFOLD
NOTE: Make sure the power button is in the “OFF” mode and that the machine is disconnected from the electrical power supply.
FOLD:Support the rear with one hand and lift the platform until the metal ball enters the closed position.
Note: Check that the cylinders click the lock before moving the treadmill.
UNFOLD:Hold the rear and pull the cylinder to unfold the treadmill. Do not stand under the platform while the treadmill is unfolded.
TO PREVENT INJURIES, MAKE SURE YOU HAVE A GOOD GRIP WHEN LIFTING OR LOWERING THE TREADMILL PLATFORM.
INSTRUCTIONS FOR CONSOLE AND SAFETY KEY
Before beginning a workout, ensure that the Safety Key is properly placed onto the Console and the Safety Clip is securely attached to an article of your clothing.
NOTE: Always stand on the side rails when you start the treadmill, never start the treadmill while you are standing on the running belt.
- Three window display shows: SPEED, TIME, DISTANCE, CALORIES, PULSE, PROGRAM.
- The functional keys: SPEED +, SPEED -, START / STOP, MODE, PROGRAM.
- When the display shows “- – -“ place the Security Key on the Console to activate operations.
- To activate the emergency brake, remove the Safety Key. The treadmill will stop automatically and the display will show.
MANUAL OPERATION
- Plug in the treadmill and make sure the master power switch located at the front of the treadmill is ON.
- Press the START/STOP key on the Console. On the display, it will start a 5 second countdown.
- After the countdown has elapsed, the running belt will slowly begin to move. The start-up speed is 0.6MPH. Once the treadmill has reached this speed you are able to get on the treadmill to start your workout.
- Press the START/STOP key to stop the treadmill. For emergency stop, remove the Safety Key.
You can preset your desired TIME, DISTANCE, and CALORIES mode before training. Only one function can be preset at a time. This is H1, H2, and H3.
H-1 TIMEPress the MODE key until the display in the Time window “–: –” starts to flash, while setting up the initial time is 30:00. It can be adjusted to 8:00-99:00 by using the +/- buttons. To confirm the time selected, press the START/STOP key.
H-2 DISTANCEPress the MODE key till the display in Distance window “-.- -” starts to flash, while setting up the initial distance is 0.6MPH, which can be adjusted by using the +/- buttons, the number will increase and decrease is by 0.1 MPH each time.To confirm the distance selected, press the START/STOP key.
H-3 CALORIEPress the MODE key till the display Calorie window “–.-” starts to flash, when setting calories, the initial value is 50.0. This can be adjusted by using the +/- buttons, the number will increase and decrease by 1 calorie and the display will count down the calories as the workout starts. To confirm the calories entered, press the START /STOP key.
SpeedOnce the desired TIME, DISTANCE, and CALORIES are set. SPEED can be adjusted by using the +/- buttons. The number will increase and decrease by 0.1 MPH
RAILINGS WITH HEART RATE SENSOR
Hold the pulse sensors located on the rails on both sides and hold them for 5 seconds. The console display will show your heart rate during exercise. The pulse sensor does not work if only one of the rails is attached. The pulse display will also show your beats per minute, with a range of 40 to 199.
BLUETOOTH AND AUDIO SYSTEM
On your cell phone go to Bluetooth and turn it on, connect it with the device named “RUNNING V3”. Music played on your phone will be played on the treadmill’s audio system.
PROGRAM (PROG)
- Press PROG on the console and press +/- until the desired program is selected. There are 12 program options (P1-P12).
- The TIME window will display a flashing preset time of 30:00 minutes. The time can be adjusted by pressing +/- buttons.
- Press the START/STOP key to start the program. There will be a 5-second countdown before the training begins with the selected program.
- After the program is finished, the treadmill stops automatically.
- The programs can be found below.
NOTE: Under program mode, the preset workout time is 30 minutes, 1/10 minutes per interval.
When the treadmill works in the preset program, the speed can be adjusted by pressing +/- buttons, however, it will automatically return to the next running mode of the preset program after each interval.
BEFORE COMPLETING THE EXERCISE SESSION, ALWAYS
- Take time to cool down, this to restore the heart rate to normal.
- Hold onto the handrails and slow down to a relaxed walking speed.
- The belt must come to a complete stop before leaving the treadmill.
WARNING: Turn off and unplug the treadmill before performing any type of maintenance or visual inspections, failure to do so could result in serious injury. Note: Lack of periodic preventative maintenance could result in the revocation of the warranty.
AT THE END OF EACH EXERCISE SESSION, ALWAYS
- Remove the Security Key from the Console.
- Press the button to turn off the treadmill.
- Always place the power cord in a safe place and out of the way.
- Unplug the power cord from the outlet. This is especially important if you will not be using the treadmill for long periods of time.
- Wipe the treadmill with a clean, dry cloth or towel, especially the side rails, console, the treadmill, and all other components.
STORAGE
Store your treadmill in a clean, dry place. Always make sure it is turned off and disconnected from the electrical current.
MOBILITY
Check that cylinder (10) is secure before moving the treadmill.The treadmill has been designed and equipped with wheels (11) for easy mobility. Before moving it, make sure it is turned off and disconnected from the electrical current. Tilt the base of the main frame, and then roll the treadmill to the desired position.
LUBRICATING THE TREADMILL
The treadmill has already been lubricated with silicone oil before leaving the factory. Silicone oil is non-volatile and should gradually permeate to cover the entire treadmill. There is no need to reapply the oil under regular circumstances.To keep the band in good condition, we have included a small bottle of silicone oil that can be re-applied if resistance has increased and the band starts to pink with the platform. In case of application, allow the oil to adhere for one minute before using the treadmill.
NOTE: Use only silicone oil for this equipment. Do not use any other type of oils or the treadmill could be damaged.Do not apply excess oil to the band. If there is excess oil, you can remove it with a clean, dry towel.
ADJUSTMENTS OF THE TREADMILL
- Set the speed to 1.8 MPH
- If the treadmill deviates to the right, adjust the right bolt by turning half a turn with the help of an Allen key in a clockwise direction and then the bolt on the left with a half turn counterclockwise. (Image 1)
- If the belt drifts to the left, adjust the left bolt by turning half a turn clockwise, and then adjust the right bolt half a turn counterclockwise. (Image 2)
- If the band does not drift but does slip, tighten both bolts (left and right) half a turn clockwise to tighten, or half a turn counterclockwise to loosen if the bolt is too tight. (Image 3 and 4)
- After making adjustments, check the band and adjust again if required.
- Image 1: Adjustment for deviation to the right
- Image 2: Adjustment for deviation to the left
- Image 3: Adjustment to tighten belt for walking
- Image 4: Adjustment to loosen belt for walking
INCLINE ADJUSTMENT
This treadmill has been designed with 3 levels of incline.You can choose the desired height with the snaps and manually adjust them.
NOTE: Make sure that both clips on both sides are set at the same level.
- LEVEL 1
- LEVEL 2
- LEVEL 3
WARRANTY
Limited Lifetime Warranty
Your Medic Therapeutics Home Treadmill Plus is backed by a limited lifetime manufacturer’s warranty. Medic Therapeutics will repair or replace your device at any time should it fail due to a defect in material or workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results from unauthorized or improper use, service, or repair.Further, it does not cover damage caused by accident, impact, negligence, or normal wear and tear. Should you discover your Medic Therapeutics Home Treadmill Plus is not functioning properly, please send your device to our repair center for evaluation. If your product cannot be repaired or serviced, we will reserve the right to change it for a similar or newer model.
Please note that a flat rate of $120.00 will be charged to cover a service evaluation fee and return shipping of your device.All warranty claims must be accompanied by a copy of your proof of purchase from an authorized retailer. Please send your device, proof of purchase, and a check or money order in the amount of $120.00 made out to Medic Therapeutics to:
Address:Medic Therapeutics Service Center 3069 Taft Street Hollywood, FL 33009
Contact:[email protected]
report this ad
[xyz-ips snippet=”download-snippet”]