MEE audio Bluetooth Wireless Media Headphones
BLUETOOTH SUPPORT PAGE
View easy-to-follow video setup guides and the latest troubleshooting information by visiting MEEaudio.com/Bluetooth or scanning the QR code.
MUSIC ENJOYMENT FOR EVERYONE
PACKAGE CONTENTS
(1) MATRIX CINEMA ANC BLUETOOTH WIRELESS HEADPHONES
(2) PREMIUM PROTECTIVE CARRYING CASE
(3) MICRO-USB CHARGING CABLE
(4) STEREO AUDIO CABLE
(5) QUICKSTART
PRODUCT OVERVIEW
Left Earcup1. 3.5mm audio jack2. Charging indicator light3. Micro-USB charging port
Right Earcup4. Volume up / Skip track button5. Volume down /Previous track button6. Status indicator light7. Multifunction button8. ANC on/off switch9. Microphone10. CinemaEAR button
CHARGING
Connect micro-USB cable to the charging port of the Matrix Cinema ANC and a powered-on computer or USB charger.
Charge time is ~2.5 hours. The red charging indicator light will turn off once fully charged.
Low battery is indicated by a flashing red status indicator light and “battery low” voice notification every five minutes.
PAIRING
Power on the headphones.Press and hold the Multifunction button for about 6 seconds until you hear the headset say “Ready to Pair” and the light flashes red and blue.
Note: the headphones will enter pairing mode automatically on first use or after a reset.
Open the Bluetooth menu on the device you wish to pair (usually located in Settings->Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh.”
Select “MEE audio Matrix Cinema ANC” and allow pairing to complete. Use “0000” if a pin is required.
Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information.
Note: It is only necessary to pair your headphones once with each device.
BASIC FUNCTIONALITY & CONTROLS
*To start playing music, open a music app on your device and start playback. **Not all devices support this functionality. For more information, refer to the user manual for your device.
NOISESHIELD™ ACTIVE NOISE CANCELLING
NOISE SHIELDThe NoiseShield Active Noise Cancelling (ANC) feature can be used in loud environments to eliminate or greatly reduce external noise for uninterrupted listening.
Active noise cancellation technology uses microphones to capture and negate sounds coming in from outside the headphones. It is most effective against constant, droning noise such as airplane engines. NoiseShield can be used independently of audio playback in both wired and wireless audio modes.
Due to the precision of the microphones that capture the noise, the headphones need to be positioned on the head correctly for best results. Reposition as needed for best noise suppression.
Note: enabling NoiseShield will reduce the battery life of the headphones. To maximize battery life, disable the feature when it is not in use.
AUDIO ENHANCEMENT
CinemaEAR is an advanced audio enhancement feature that allows for on-the-fly audio adjustment with four different hearing and sound enhancement modes:
Clear Voice ModeBoosts speech clarity to make dialogue in movies and TV programs easier to hear over background sounds
Clear Voice Plus ModeAn additional enhancement to provide a greater boost in speech clarity and intelligibility
Dynamic Music ModeOur signature sound; improves bass and treble response to make music sound more lively and exciting
Bass Boost ModeEnhances bass response and depth to create more impact and immersion with movies and music
ADVANCED FUNCTIONALITY
MULTIPOINTMultipoint is an optional feature that allows two Bluetooth devices to be connected to the Matrix Cinema ANC simultaneously. It is enabled by default.
*Standby mode: headphones are powered on but not connected to any Bluetooth device(s). While in standby mode, the blue status indicator light blinks every second
DISABLING AUDIO PROMPTSThe voice prompts of the Matrix Cinema ANC can be disabled for uninterrupted listening. This will turn off all voice prompts and some basic audio notifications.
*Standby mode: headphones are powered on but not connected to any Bluetooth device(s). While in standby mode, the blue status indicator light blinks every second
DISABLING STATUS INDICATOR LIGHTThe status indicator light on the right earcup of the Matrix Cinema ANC can be disabled for uninterrupted use in low-light environments.
USE AS WIRED HEADPHONE
The Matrix Cinema ANC can be used as a wired headphone with the included 3.5mm stereo audio cable. This allows use when the battery is depleted and with devices that do not have Bluetooth (such as in-flight entertainment systems) or aren’t paired.
Note: the microphone, remote controls, and CinemaEAR audio enhancement functionality of the Matrix Cinema ANC will not work when the headphones are used in wired mode.
TROUBLESHOOTING
CLEAR MEMORY (DELETE PAIRED DEVICES):This can be used to delete all previous Bluetooth pairings from memory. Before the Matrix Cinema ANC can be used again, a new pairing will need to be created.
FACTORY RESET
This can be used to restore all of the features of the Matrix Cinema ANC to their factory settings.
HARD REBOOTA hard reboot can be used on a headphone that has become unresponsive. This does not delete any pairings or reset any settings.
SAFETY AND CARE
- Clean with a soft cloth, damp with diluted soap water solution if necessary. Do not use chemical cleaners.
- When not in use, power the headphones off and store them in the included protective carrying case.
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
- The lifetime of the battery will be significantly reduced if your headset is not charged for a long time. It is recommended to charge your headset at least once a month.
- There are no user-replaceable/reparable parts in the headset. Disassembling it will void your warranty.
- If the device comes in contact with liquids, quickly wipe it away. If submerged in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Do not use around flammable gasses as fire or explosion may occur.
WARNINGUsing headphones at high volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Turn the volume all the way down after connecting your headphones, then gradually increase the volume until you reach a comfortable listening level. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.Keep the device and packaging out of reach of children.
FOR ADDITIONAL SUPPORT
- Visit our Bluetooth Support Page at MEEaudio.com/Bluetooth for easy-to-follow video setup guides and the latest troubleshooting information
- Contact us at [email protected]
WARRANTYMEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, contact your local MEE audio dealer or visit MEEaudio.com/Support
COMPLIANCE INFORMATIONThis device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- The danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gasses, or heat sources such as radiators or stoves
- Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RULESThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLINGDispose of this product in accordance with all local laws and regulations. Because this product contains electronic components and a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.
Have a question? Email [email protected] 
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
iPhone®, iPad®, iPod®, and Siri® are registered trademarks of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
QUESTIONS?WE’RE HERE TO HELP!Phone Support: 626-965-1008 x31Monday ~ Friday 9:00am to 5:00pm PST
Email Support: [email protected]All emails are responded to within 2 business days
References
[xyz-ips snippet=”download-snippet”]